Author Topic: Taking too long  (Read 14890 times)

2014-04-13, 16:28:43

klipanos

  • Active Users
  • **
  • Posts: 201
    • View Profile
I made a simple scene for one client and it's taking too long to render and i have too much noise in the scene.
It takes 15 minutes to calculate and to get this result 3 hours . Resolution 2000x1160.
I use only corona sun and three corona portal mtl. The rendering settings are the defaults.
Any ideas why it's taking too long and about hte noise??

2014-04-13, 16:50:37
Reply #1

maru

  • Corona Team
  • Active Users
  • ****
  • Posts: 13130
  • Marcin
    • View Profile
1. What are your system specs?
2. Show us some wires, materials.
3. Where and how do you place your portals?
Marcin Miodek | chaos-corona.com
3D Support Team Lead - Corona | contact us

2014-04-13, 17:09:33
Reply #2

klipanos

  • Active Users
  • **
  • Posts: 201
    • View Profile
Hi Maru!!
My system is an intel i5 2,26 ghz, 120 ssd, 8 gb ram

I dont have any particular geometry ,and my materials are very simple, i used many of them from materials corona settings.
If needed i can show materials.

I placed the portals nearly inside the glass material...

2014-04-13, 17:46:00
Reply #3

maru

  • Corona Team
  • Active Users
  • ****
  • Posts: 13130
  • Marcin
    • View Profile
And it is wrong to place portals inside. You should place them outside of the window holes or perfectly capping the window holes.

good
http://3.bp.blogspot.com/-XEweYqS9bcQ/Uzqdm-IkmDI/AAAAAAAAKCg/y56v-nuiKjA/s1600/portalok.JPG

good
http://4.bp.blogspot.com/-nMaA1BxlvU8/UzqdrjcIbhI/AAAAAAAAKC4/cseC3kGjP1k/s1600/portalok2.JPG

bad
http://3.bp.blogspot.com/-WUSZEbS_PAk/UzqdtsZ1MWI/AAAAAAAAKDA/c1KZLpGPekA/s1600/portalzle.JPG

Hope that helps. Also, you shouldn't use very bright materials but I don't think you have any.

btw, are you using HD cache?
Marcin Miodek | chaos-corona.com
3D Support Team Lead - Corona | contact us

2014-04-13, 18:06:39
Reply #4

klipanos

  • Active Users
  • **
  • Posts: 201
    • View Profile
I allready tried putting the portal just outside... same time...
and i putted inside to bypass the glass if there is the problem...
is very strange for that scene to take that long... my previous one was 5 times bigger and i had no problem...

I didn't quite understand about the HD cache... i have two one is 120 GB SSD, and one is 750 GB HDD on the same laptop... if that is you mean...

2014-04-13, 18:19:38
Reply #5

borisquezadaa

  • Active Users
  • **
  • Posts: 614
    • View Profile
The appliances over the kitchen looks suspiciusly brigth. Check those with an albedo pass (add them in the render elements tab F10)?.
Also double check your windows glass material refraction mode.
Did you illuminate with geometry emitting or hdri?


« Last Edit: 2014-04-13, 20:08:27 by borisquezadaa »
What i do with Corona My Corona post of random stuff rendering
WARNING: English.dll still loading...

2014-04-13, 19:26:25
Reply #6

maru

  • Corona Team
  • Active Users
  • ****
  • Posts: 13130
  • Marcin
    • View Profile
I didn't quite understand about the HD cache... i have two one is 120 GB SSD, and one is 750 GB HDD on the same laptop... if that is you mean...
Not HDD but HD cache. You should always have "HD cache" as secondary solver in interior renders.
If it's not the case, then maybe you will find some hints here:
http://corona-renderer.com/wiki/performance_debugging

btw, question of the year: what does HD in HD cache stand for? :D
Marcin Miodek | chaos-corona.com
3D Support Team Lead - Corona | contact us

2014-04-13, 19:58:30
Reply #7

klipanos

  • Active Users
  • **
  • Posts: 201
    • View Profile
ahahahaha!!!!
I allways use hd cache!!!!!!!!!!

The appliances over the kitchen looks suspiciusly brigth. What about checking with an albedo pass (add them in the render elements tab F10)?.
Also double check your windows glass material refraction mode.
Did you illuminate with geometry emitting or hdri?

I checked the glass, and the appliances are fine..
I illuminated the scene with just a corona sun and three corona portal mtl

2014-04-13, 20:27:37
Reply #8

borisquezadaa

  • Active Users
  • **
  • Posts: 614
    • View Profile
i thought there was an hdri in the environment slot because trough the door we can see some background, and sometimes reflect materials without fresnel looks like they  have a metalic cover (as the coffe machine has).
What i do with Corona My Corona post of random stuff rendering
WARNING: English.dll still loading...

2014-04-13, 21:00:01
Reply #9

klipanos

  • Active Users
  • **
  • Posts: 201
    • View Profile
I 've placed a plane and a bitmap ... i do this often to match real outdoor for the living space i make the render... this particular is a photo taken from the balkonie of the house..

I can't find though a solution to my problem.. i tried everything... i also cleared the scene of any objects still too slow....

2014-04-14, 01:16:30
Reply #10

borisquezadaa

  • Active Users
  • **
  • Posts: 614
    • View Profile
One last...
Why dont you try the "Mtl. override", assignit a defaut Corona Material and exclude geometry (like glass for example) one by one until you find the offending peace of geometry?...
Not one by one off course, you can do it in groups. Just cheking stats in the corona render frame until you see a dropdown.
What i do with Corona My Corona post of random stuff rendering
WARNING: English.dll still loading...

2014-04-14, 12:23:02
Reply #11

maru

  • Corona Team
  • Active Users
  • ****
  • Posts: 13130
  • Marcin
    • View Profile
I 've placed a plane and a bitmap ... i do this often to match real outdoor for the living space i make the render... this particular is a photo taken from the balkonie of the house..
How did you do this? What kind of material did you assign to the plane?
Marcin Miodek | chaos-corona.com
3D Support Team Lead - Corona | contact us

2014-04-14, 19:51:38
Reply #12

klipanos

  • Active Users
  • **
  • Posts: 201
    • View Profile
I 've placed a plane and a bitmap ... i do this often to match real outdoor for the living space i make the render... this particular is a photo taken from the balkonie of the house..
How did you do this? What kind of material did you assign to the plane?

Very simple ... i made a corona mtl and putted the jpg...

2014-04-14, 21:01:33
Reply #13

romullus

  • Global Moderator
  • Active Users
  • ****
  • Posts: 9021
  • Let's move this topic, shall we?
    • View Profile
    • My Models
Did you turned off cast/receive shadows and visible to reflections/refractions options for that plane, or is it sitting between your enviroment and your subject and blocking most of the light?
I'm not Corona Team member. Everything i say, is my personal opinion only.
My Models | My Videos | My Pictures

2014-04-14, 21:55:15
Reply #14

maru

  • Corona Team
  • Active Users
  • ****
  • Posts: 13130
  • Marcin
    • View Profile
I 've placed a plane and a bitmap ... i do this often to match real outdoor for the living space i make the render... this particular is a photo taken from the balkonie of the house..
How did you do this? What kind of material did you assign to the plane?

Very simple ... i made a corona mtl and putted the jpg...

So this is probably the cause of your problems.
And how did you make it glow? It clearly glows in your renders.

To do this properly you should use CoronaLightMtl with your bitmap and "emit light" disabled.
Marcin Miodek | chaos-corona.com
3D Support Team Lead - Corona | contact us