Corona6 Problem

[Tommaso]

 I bought last version of corona a month ago and now I have a problem with corona and distributed renders.


I make an overview of our PCs:

on 2 a version of corona workstation has been installed and the others are used as a node. 3 of these have 32GB of ram while the PC hosting the backburner queue has 48GB.


the 2 PCs with corona workstations cannot render: cpu at 0%, ram and ssd disk at 100%, and they perform half the passes compared to the others that render normally, but being the less performing they carry the single render (minimum size A3 ) at a timeframe of 20 hours.


a RAM upgrade to at least 64 GB for all PCs could help, or do you think the problem is due to something else?


thanks

for the help

[rowmanns]

Hi,

This does indeed sound like a problem caused by low memory. I would either try to simplify the scene somehow or recommended upgrading your RAM.

Cheers,

Rowan

[Tommaso]

hi rowmanns, thanks for reply,

we usually also work with more complicated scenes, so in your opinion how much RAM we need to be able to work safely.

thanks
tommaso

[rowmanns]

Hi,

That is a good question and I can't give you some specific number. You should be getting a low memory warning message from Corona when rendering which will tell you how much memory Corona needs to allocate for that specific scene so that might be a good place to start.

Alternatively it could be worth looking/asking on the hardware section of the forums :)

I hope this helps.

Cheers,

Rowan