1
[Max] I need help! / Re: 30k render (strip renders) do not match near shadow catcher plane
« on: 2024-07-10, 04:05:51 »
🙏 Thank you!
2025-07-05, 13:04:02
News:
Having trouble verifying your license? If you are seeing a license verification message or are unable to access your Chaos products, please follow these simple steps to fix sign-in issues. If you have already tried this and are still unable to access your Chaos products, please contact Support.
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
[Max] Resolved Bugs / Re: Crash while undoing moves made on standard spotlight target
« on: 2022-12-12, 23:59:29 »
No worries, thank you very much for the update.
If it's a 3ds Max issue, I honestly wouldn't invest any time in trying to come up with a workaround on the Corona side of it. I'm sure it's a tiny fraction of the user base that is affected by this minor annoyance.
If it's a 3ds Max issue, I honestly wouldn't invest any time in trying to come up with a workaround on the Corona side of it. I'm sure it's a tiny fraction of the user base that is affected by this minor annoyance.
3
[Max] Resolved Bugs / Re: Crash while undoing moves made on standard spotlight target
« on: 2022-11-28, 06:30:56 »
I've trained myself pretty well to not undo a move to the standard lights...but it still catches me from time to time. Like just now. So, while 3ds Max reboots, I figured I'd come here and check in on this bug.
FWIW, if you're wondering why I'd use the standard lights to begin with. It's to give me control of the visibility of the light source while still giving a 'specular' contribution. The standard lights with Corona shadows also give me control of the softness of the area shadow independently from the size of the light source.
FWIW, if you're wondering why I'd use the standard lights to begin with. It's to give me control of the visibility of the light source while still giving a 'specular' contribution. The standard lights with Corona shadows also give me control of the softness of the area shadow independently from the size of the light source.
4
[Max] Resolved Bugs / Re: distributed rendering problem!!
« on: 2022-02-04, 19:05:41 »
I wanted to bump this & ask if the similar issue I reported experiencing is in fact the same or if I need to create a new thread for my issue? I had also submitted a file for review (DBR_Crash_Sample.7z).
Thanks
Thanks
5
[Max] Bug Reporting / Monitors won't go into sleep mode when Distributed Rendering is used
« on: 2022-02-02, 07:54:44 »
Whenever I use Distributed Rendering from my workstation I've noticed my monitors (only on my workstation) will not go into sleep mode. They stay on the whole time the sequence is rendering. Only when the job is complete does it allow the monitors to enter sleep mode.
If I render the sequence on my workstation, without DBR enabled, the monitors go to sleep normally. Even during the render process. Only using DBR triggers this behavior.
Win10 / 3ds Max 2022 / Corona 7 HF1
If I render the sequence on my workstation, without DBR enabled, the monitors go to sleep normally. Even during the render process. Only using DBR triggers this behavior.
Win10 / 3ds Max 2022 / Corona 7 HF1
6
[Max] Resolved Bugs / Re: distributed rendering problem!!
« on: 2021-12-07, 04:41:05 »
Subbing to thread because I'm experiencing the same. The magic point for me is around 4.1gb. I have to strip my work scenes down to that size (roughly) else Corona/3dsMax will freeze/lock when I hit render with DBR enabled.
(AMD threadripper CPUs / 128gb RAM / 3dsMax 2021 / Corona 7 hotfix 1 / Win10 OS)
I will also see if I can submit a scene that freezes.
(AMD threadripper CPUs / 128gb RAM / 3dsMax 2021 / Corona 7 hotfix 1 / Win10 OS)
I will also see if I can submit a scene that freezes.
7
[Max] Resolved Bugs / Crash while undoing moves made on standard spotlight target
« on: 2021-11-16, 22:57:32 »
I'm getting a repeatable crash that I've narrowed down to the standard spotlight target (undoing moves made to it). I've recorded a screen capture of it happening (attached). I'll also attach the stripped down scene. Software: 3ds Max 2022.1 with Corona 7 (Hotfix 1).
Steps to repeat:
Move the spot light target several times to build multiple undo points. It often crashes on the first undo. However, sometimes it's 3-5 undo's before it crashes.
Steps to repeat:
Move the spot light target several times to build multiple undo points. It often crashes on the first undo. However, sometimes it's 3-5 undo's before it crashes.
8
[Max] Daily Builds / Re: Corona Renderer 7 for 3ds Max - Daily Builds Discussion
« on: 2021-03-31, 20:50:59 »
Sorry, I just saw the posts about it in the dedicated physical material thread.
9
[Max] Daily Builds / Re: Corona Renderer 7 for 3ds Max - Daily Builds Discussion
« on: 2021-03-31, 20:24:32 »
Regarding the new CoronaPhysicalMtl - Will it be possible for the Base layer bump (normal) map to not impact the Clearcoat layer?
10
[Max] I need help! / Re: 30k render (strip renders) do not match near shadow catcher plane
« on: 2018-11-03, 16:42:15 »Hmm, I can't find the file. Did you upload it through Dropbox or regular upload?
Regular upload. It didn't fully complete the upload process last night apparently. I just uploaded it again and received the successful upload message this time. Should be there now (same file name).
11
[Max] I need help! / Re: 30k render (strip renders) do not match near shadow catcher plane
« on: 2018-11-03, 03:50:58 »
Thanks. The set is from https://hdri-locations.com/details/Mountain+pass+road/0108?fbclid=IwAR3GwN8YHysGvNdZZm8XeaHrgkh62Jaeysghpplzuzrf_-HbrX02CaCArxo
I added the motion blur effect to the backplate using the path blur tools in Photoshop.
I added the motion blur effect to the backplate using the path blur tools in Photoshop.
12
[Max] I need help! / Re: 30k render (strip renders) do not match near shadow catcher plane
« on: 2018-11-03, 00:57:03 »
Thanks for the tip on the low mem option. I'll give that a whirl too. In the meanwhile, I've uploaded a stripped version of the scene (I verified that it still exhibits the issue). The file name: "Multi-Render_Corona-stripped.zip"
Thanks!
Thanks!
13
[Max] I need help! / Re: 30k render (strip renders) do not match near shadow catcher plane
« on: 2018-11-02, 00:47:54 »
Tried that and unfortunately it didn't help. :/
14
[Max] I need help! / Re: 30k render (strip renders) do not match near shadow catcher plane
« on: 2018-11-01, 22:20:48 »
^ Same deal here. It renders fine at lower resolutions. Starts throwing memory warnings around 15k, but still renders ok. It will crash 3ds Max when I go this large in one shot though, so I was trying the scripts & strips options.
Might be helpful if there was that old bucket mode option, but I know that may generate its own world of issues. That, or some kind of corona splitter option built-in that would properly calculate the scene.
I'll see if I can run it without a frame buffer. Had to do that with VRay on the same scene.
Might be helpful if there was that old bucket mode option, but I know that may generate its own world of issues. That, or some kind of corona splitter option built-in that would properly calculate the scene.
I'll see if I can run it without a frame buffer. Had to do that with VRay on the same scene.
15
[Max] I need help! / 30k render (strip renders) do not match near shadow catcher plane
« on: 2018-10-30, 22:20:13 »
I'm running some tests and one of which is a 30k render because I have those type of projects come along from time to time. With Corona (tested RC2 and RC3) I'm not able to directly render @ 30,000 pixels wide (it crashes out of memory).
I used the network/backburner/strip method to render the image out in strips. That kind of worked. It at least rendered the image. However, I'm getting one sequence that remains different (nearest to the shadow catcher ground plane):
There were 10 strips in total, here's where they aligned:
I've tried it with path tracing and using a saved UHD cache (lower res save) but it always produces this anomaly at the bottom. The split at the upper portion of the car looks fine.
I've also tried the Rakete_BigRender script posted in another thread here about large render issues. It also produces a different look but within each tile though.
Thoughts?
I used the network/backburner/strip method to render the image out in strips. That kind of worked. It at least rendered the image. However, I'm getting one sequence that remains different (nearest to the shadow catcher ground plane):
There were 10 strips in total, here's where they aligned:
I've tried it with path tracing and using a saved UHD cache (lower res save) but it always produces this anomaly at the bottom. The split at the upper portion of the car looks fine.
I've also tried the Rakete_BigRender script posted in another thread here about large render issues. It also produces a different look but within each tile though.
Thoughts?