Messages

1

Hardware / Re: Threadripper Builds

« on: 2020-01-28, 10:34:04 »

Thanks Juraj, I appreciate the feedback!
Just to clarify do you think the Noctura UH -14 would be a better solution in the time being until I can build a custom loop setup?

Cheers.

2

Hardware / Re: Threadripper Builds

« on: 2020-01-27, 23:12:16 »

Hi guys, so I recently finished a 3960x build with a Cooler Master MasterLiquid ML360 RGB TR4 Edition CPU cooler, the case also has a lot of open space for ventilation.
Now when rendering I'm getting temps of around 90°C i know the max temp is 95°C but I cant help but think that's kinda high. If anyone could shed some light that would be great.
*There is thermal pastes and all fans are working. 

3

Hardware / Re: Threadripper Builds

« on: 2019-12-19, 01:11:40 »

Should be lower. Have you used preapplied thermal paste ( if it comes with one) or aftermarket one. What pattern you used to apply aftermarket paste . Could be termalpaste issue.  Have you OC it ? Are all fans working ?

Managed to sort it out thanks for the tips! It was actually my case design, there are not enough exhaust vents for the cooling radiator. I took the cover off and now at full load it sits at around 72°C.

4

Hardware / Re: Threadripper Builds

« on: 2019-12-15, 23:55:51 »

Hi guys, wondering if I could get some advice:-
I've recently built a TR3960X using a Cooler Master ML360 RGB TR4 Edition.
The issue is that when rendering I am reaching CPU temps of ±85°C(Ryzen Master Utility)
Is this normal? Thanks in advance!