1
Hardware / Re: ASUS Z9PE-D8 WS + 2x E5-2690 doesn´t boot
« on: 2016-12-05, 19:46:15 »
I check temps on new mobo, it should be lower...
2025-07-06, 23:13:46
News:
Having trouble verifying your license? If you are seeing a license verification message or are unable to access your Chaos products, please follow these simple steps to fix sign-in issues. If you have already tried this and are still unable to access your Chaos products, please contact Support.
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
Hardware / Re: ASUS Z9PE-D8 WS + 2x E5-2690 doesn´t boot
« on: 2016-12-05, 19:19:58 »
NOCTUA NH-U14S
3
Hardware / Re: ASUS Z9PE-D8 WS + 2x E5-2690 doesn´t boot
« on: 2016-12-05, 18:26:36 »
so memory should be ok... I´ve just worried about temp of E5-2690. Bios showed me 60 and 50 degrees without stress,
it´s really high temp, max tem by intel is 72 degree...
http://ark.intel.com/products/64596/Intel-Xeon-Processor-E5-2690-20M-Cache-2_90-GHz-8_00-GTs-Intel-QPI
Is anybody there who use E5-2690 cpus?
it´s really high temp, max tem by intel is 72 degree...
http://ark.intel.com/products/64596/Intel-Xeon-Processor-E5-2690-20M-Cache-2_90-GHz-8_00-GTs-Intel-QPI
Is anybody there who use E5-2690 cpus?
4
Hardware / Re: ASUS Z9PE-D8 WS + 2x E5-2690 doesn´t boot
« on: 2016-12-05, 18:17:09 »
Seller give me new mobo, so I try my memory and try to borrow some memory.
I bought this, one guy bought it there as well, so it shloud work:
http://www.ebay.co.uk/itm/8x-8GB-64GB-RDIMM-ECC-REG-DDR3-1600-MHz-RAM-Asus-Board-Z9PA-D8-Z9PA-U8-Z9PA-D8C-/361782370872?hash=item543be8e238:g:YWsAAOSwPhdU0QH0
I bought this, one guy bought it there as well, so it shloud work:
http://www.ebay.co.uk/itm/8x-8GB-64GB-RDIMM-ECC-REG-DDR3-1600-MHz-RAM-Asus-Board-Z9PA-D8-Z9PA-U8-Z9PA-D8C-/361782370872?hash=item543be8e238:g:YWsAAOSwPhdU0QH0
5
Hardware / Re: ASUS Z9PE-D8 WS + 2x E5-2690 doesn´t boot
« on: 2016-12-05, 10:37:24 »
It doesn´t boot to bios, so I can´t upgrade it.
6
Hardware / ASUS Z9PE-D8 WS + 2x E5-2690 doesn´t boot
« on: 2016-12-04, 10:48:05 »
So I thought, that bulding new station with ASUS Z9PE-D8 WS will be easy, but it´s horror...
I have new 2x E5-2690 cpus, 8x8 GB ECC REG DDR3 1600 memory, ASUS Z9PE-D8 WS, Corsair HX1200i psu /EVGA 850 G2 as backup/.
After 8hours of trying I was able to see bios only in begining, cpus and memory were correct displayed there.
Rest of time I tried to reorganized all, changed cpus, memory modules, psu cables, sometimes I have seen q code, but rest of time I´ve seen only
power button and reset button luminous. Pressed power button, nothing happened, sometimes q code.
I try everything, 1 cpu-1 mem module, 2cpus-2 modules, 2 psu, exchange cpu postions, but nothing helped.
There is a lot of posts with problem with this board, there is my problem, exactly:
http://vip.asus.com/forum/view.aspx?SLanguage=en-us&id=20120405093230054&board_id=1&model=P5E3&page=1&count=27
Do you have same problems? What shall I do?
I have new 2x E5-2690 cpus, 8x8 GB ECC REG DDR3 1600 memory, ASUS Z9PE-D8 WS, Corsair HX1200i psu /EVGA 850 G2 as backup/.
After 8hours of trying I was able to see bios only in begining, cpus and memory were correct displayed there.
Rest of time I tried to reorganized all, changed cpus, memory modules, psu cables, sometimes I have seen q code, but rest of time I´ve seen only
power button and reset button luminous. Pressed power button, nothing happened, sometimes q code.
I try everything, 1 cpu-1 mem module, 2cpus-2 modules, 2 psu, exchange cpu postions, but nothing helped.
There is a lot of posts with problem with this board, there is my problem, exactly:
http://vip.asus.com/forum/view.aspx?SLanguage=en-us&id=20120405093230054&board_id=1&model=P5E3&page=1&count=27
Do you have same problems? What shall I do?
7
Hardware / Re: Guide for budget 32thread render node build / 2xXeon E5 2670v1 C2 sub 900 euro
« on: 2016-12-01, 22:29:51 »
What do you thing about this:
Asus Z9PE-D8 WS + 2x E5-2690/Cinebench R15 2150 points/ + 8x8 DDR3 ECC REG 1600 - price 990 Euros
Asus Z10-PE-D16 WS + 2x E5-2683V3 ES /Cinebench R15 2900 points/ + 8x8GB DDR4 ECC REG 2133 - price 1600 Euros
Asus Z10-PE-D16 WS + 2x E5-2683V3 /Cinebench R15 3200 points/ + 8x8GB DDR4 ECC REG 2133 - price 1830 Euros
Quadro K5000+2xSSD+3xHDDs
PSU Corsair RM1000i or HX1200i /2 more graphics cards for rendering in future, maybe/
CASE Nanoxia Deep Silence 6, Rev. B /need more space for hdds in aluminium boxes/
Asus Z9PE-D8 WS + 2x E5-2690/Cinebench R15 2150 points/ + 8x8 DDR3 ECC REG 1600 - price 990 Euros
Asus Z10-PE-D16 WS + 2x E5-2683V3 ES /Cinebench R15 2900 points/ + 8x8GB DDR4 ECC REG 2133 - price 1600 Euros
Asus Z10-PE-D16 WS + 2x E5-2683V3 /Cinebench R15 3200 points/ + 8x8GB DDR4 ECC REG 2133 - price 1830 Euros
Quadro K5000+2xSSD+3xHDDs
PSU Corsair RM1000i or HX1200i /2 more graphics cards for rendering in future, maybe/
CASE Nanoxia Deep Silence 6, Rev. B /need more space for hdds in aluminium boxes/
9
Gallery / Re: bmw test...
« on: 2014-12-03, 19:16:29 »
I have no idea... :D
I didn´t model it, just render.
I didn´t model it, just render.
10
Gallery / bmw test...
« on: 2014-12-03, 18:12:50 »
corona renderer test + photoshop retouching... :)
render time 4 min, 20 passes, resolution 3800x2537px.
render time 4 min, 20 passes, resolution 3800x2537px.
Pages: [1]