Chaos Corona Forum

Chaos Corona for 3ds Max => [Max] I need help! => Topic started by: TangibleVisual on 2019-09-18, 07:44:27

Title: Corona Dr server Local IP mismatch
Post by: TangibleVisual on 2019-09-18, 07:44:27

Hi,

I have an odd problem, I noticed that my machine wasn't picking up a DR job. I noticed that the Local IP address show on DRServer 192.168.1.55 does not match the local IP of the machine 192.168.1.100 (which is set as a static IP by the way)

See attached.

I've tried to fix this by reinstalling DR server but to no avail, is there anything else I should do?

Thanks,

Dan

Title: Re: Corona Dr server Local IP mismatch
Post by: Frood on 2019-09-18, 08:22:46

Quote from: TangibleVisual on 2019-09-18, 07:44:27

is there anything else I should do?

What's the output of "ipconfig -all" typed in a command prompt?


Good Luck

Title: Re: Corona Dr server Local IP mismatch
Post by: TangibleVisual on 2019-09-18, 12:26:58

Hi Frood,

Just as expected, 192.168.1.100  it's odd, I don't know where CoronaDR is getting 192.168.1.55 from.

Dan

Title: Re: Corona Dr server Local IP mismatch
Post by: rowmanns on 2019-09-19, 13:05:50

Hi,

Do you have any virtual adapters on you system?

Thanks,

Rowan

Title: Re: Corona Dr server Local IP mismatch
Post by: TangibleVisual on 2019-09-19, 13:39:00

Hi Rowan,

No, no virtual adaptors. I've done a little testing and when I set the network adapter to 'obtain IP address automatically' it is given 192.168.1.55 by the DHCP server, then when I set it back to the static IP 192.168.1.100 (which is outside of the DHCP allocation pool) the DR server doesn't seem to recognise this change..

I've always run static IPs on the workstation and slaves and never had this before..

Dan

Title: Re: Corona Dr server Local IP mismatch
Post by: TangibleVisual on 2019-09-20, 18:39:13

Update, so I have a work around. The PC I am on has 2 network adaptors, I switched the cable and set the static IP on the new adaptor and now it works as expected.