Chaos Corona Forum
General Category => Gallery => Topic started by: aldola on 2014-02-04, 17:56:26
-
Hi to all this is a loft for a client in uruguay comment and sugestions are welcome
-
The 7 and 8 picture have too much things going on, I mean the duck in the oven, the microwave light turned on , the cofee, bread and so on, As Juraj told on another post i think its better to make a clener image (the client wants to see the best of his appartment not that we know or dont know how to fill a kitchen with props) No offence here just criticism
-
Very Tasty )
-
thanks for the critic good point! may be it was to much things on the 7,8
-
Great mood and design. You even included a mate with the correspondent thermo! Great work and results.
-
here are some test that i made during the process , i liked the bokeh a lot ,but it takes very long to clean , i render the whole image to a reasonable size an then i cleaned the bokeh using regions
-
Here is a house we made the project and rendered of course with corona
-
Does the chair by any chance have a normal map? There is a distinct line cutting it down the middle, and that usually happens when you use normal map loaded with wrong gamma.
-
here are some test that i made during the process , i liked the bokeh a lot ,but it takes very long to clean , i render the whole image to a reasonable size an then i cleaned the bokeh using regions
Those pentagrams is a dead giveaway of fact, that background is 2d plane. Other than that, nice set of images.
Rawalanche, if i may ask, why corona requires normal maps to be loaded with 2.2 gamma instead of linear? It's contradicts to what i used for in other render engines.
-
the background is a cylinder with a 360 map
the chair has no normal map, it is modeled like this, you can find it here http://www.designconnected.com/seating/lounges/Hardoy-Chair_p3496