Chaos Corona Forum
Chaos Corona for 3ds Max => [Max] I need help! => Topic started by: LorenzoS on 2018-09-15, 09:53:55
-
Hi all,
i have a problem with the corona r3 version, when i use Ai denoiser the Pc shut down, after short time (1 o two minutes),
The critical event on win 10 64 bit is 41(63).
I have a nvidia geforce 970 with the latest driver version.
someone know if can be a software problem or an hardware one?
thank you
-
I would try to run stress test on the video card and see how it goes.
-
This behavior if you set automatically reboot at screen of death. You can read errors at system log
-
Thanks for repaly.
I would try to run stress test on the video card and see how it goes.
with FurMark_1.20.1.0 it seems ok, no problem.
This behavior if you set automatically reboot at screen of death. You can read errors at system log
I don't know how to setup this.
-
https://www.maketecheasier.com/handle-blue-screen-of-death-automatic-restart-windows/
but you do not need to change it,just read system log by time of crush. Check temperature of videocard too
-
Ok, thank you,
this morning strangely the shut down does not happen, but if it will be i will send the system errors.
-
Did again after istalling the Corona_2018-09-18.
I donn't know if the attachement can help.
I found that after reboot chosing the critical event with the same time of shout down.
-
I don't think anything else than hardware or drivers can cause an instant PC shutdown.
-
https://support.microsoft.com/en-gb/help/2028504/windows-kernel-event-id-41-error-the-system-has-rebooted-without-clean
this is not the reason of rebooting, you need to read before that log