Chaos Corona Forum

General Category => General CG Discussion => Hardware => Topic started by: lacilaci on 2016-04-28, 09:25:50

Title: Spyder 5
Post by: lacilaci on 2016-04-28, 09:25:50

Hi guys, anyone has experiences with the spyder calibration HW?

I want to buy spyder 5 but don't know if I should take the version which allows for studio matching. Or if I'm good with express.

Is it important to have monitors matching? I don't have them matching now and only one I use for photo and final renderings is calibrated.

Also, does someone know if colormunki is a good alternative? I didn't like their website (yes I'm a bit shallow) and it actually redirected me to a reseller which had large spyder 5 banner on their web :D sooo... I have no idea.

Thanks for any help/advice.

Title: Re: Spyder 5
Post by: Juraj on 2016-04-28, 12:43:24

I used i1Display Pro mostly because that is what Dell (and other hardware calibratable models from brands like NEC,Eizo) requires for their high-end models, so this is 3rd option, and arguably, publicly best regarded. It's cheaper than Spyder5Elite,
and most useful for future use in case you ever upgrade to new high-end display.

Title: Re: Spyder 5
Post by: lacilaci on 2016-04-28, 13:10:19

Quote from: Juraj_Talcik on 2016-04-28, 12:43:24

I used i1Display Pro mostly because that is what Dell (and other hardware calibratable models from brands like NEC,Eizo) requires for their high-end models, so this is 3rd option, and arguably, publicly best regarded. It's cheaper than Spyder5Elite,
and most useful for future use in case you ever upgrade to new high-end display.

Wow, i kinda took it for granted that all colorimeters are capable of hw calibration. Guess I'll have to spend more time on this. Thanks for the tip.

Title: Re: Spyder 5
Post by: Juraj on 2016-04-28, 13:12:44

They might be on technical level, but lot of these brands kind of make it a "closed" system. Then you just have to use what they decided.

Title: Re: Spyder 5
Post by: Jann on 2016-04-28, 13:24:13

Recently got myself a X-rite ColorMunki Display. From researching differences vs the Spyder 5 Pro, seems that the Spyder is faster, but more of a closed platform. X-Rite devices are better supported by third party and open source software (though I haven't tried any yet).
As for my experience, worked fine on all 8 monitors I've calibrated so far. A 40inch 4k monitor with a VA panel did act weird at first, but seemed much better color wise after (comparing to an ips Dell next to it), so I don't think it was the calibrators fault. That's my experience so far.