Author Topic: Corona Renderer 5 for 3ds Max - Daily Builds Discussion  (Read 60488 times)

2019-10-27, 19:34:17
Reply #210

TomG

  • Administrator
  • Active Users
  • *****
  • Posts: 5434
    • View Profile
===== Error(3) =====
Bad allocation Exception!
Corona Renderer ran out of RAM an was unable to allocate memory it needs for rendering. This can be caused by rendering too big scene with not enough RAM, or an internal bug in Corona Renderer. Contact our support for more info.

Debugging details:
Wanted to allocate: 71.5 MB

9.4 GB of virtualized* RAM used by application
16.6 GB of virtualized* RAM used by all running applications
15.9 GB of physical RAM installed on system
16.6 GB of virtualized* RAM provided by OS

* virtualized RAM means physical RAM + swap file on HDD/SSD

This is the first error message I received in the middle of rendering and the render operation stopped automatically. The scene I was working on was low poly and I think this is a bug for Corona 5.
Thanks

It's usually not a bug :) The only way we could tell is to see the scene itself, or at very least a render of it to see what is in the scene - you can send the scene via private uploader and see the info we need for a bug report (such as which host software, which OS, which Corona version etc) at https://coronarenderer.freshdesk.com/support/solutions/articles/5000524006-how-to-report-issues-3ds-max

Things that can use a lot of memory are things like high res texture maps, lots of displacement, lots of scatters, etc. all of which might appear in "simple" scenes even if they are "low poly"
Tom Grimes | chaos-corona.com
Product Manager | contact us

2019-10-28, 09:10:05
Reply #211

Feodor

  • Active Users
  • **
  • Posts: 121
    • View Profile
I noticed the crown does not behave stably during rendering, different scenes at different times can crash max without warning. This has not been observed before.
I use the Corona Render RC 2, 3ds max 2020.2
Windows 10 Pro, Version 1809, Build 17763.805

2019-10-28, 13:58:31
Reply #212

TomG

  • Administrator
  • Active Users
  • *****
  • Posts: 5434
    • View Profile
I noticed the crown does not behave stably during rendering, different scenes at different times can crash max without warning. This has not been observed before.
I use the Corona Render RC 2, 3ds max 2020.2
Windows 10 Pro, Version 1809, Build 17763.805

We'd really need more info - and the beauty of a crash (the only good thing about a crash) is it produces a minidump that says just what Max was doing at the time. For any crash, the best thing to do is send that to us (see https://coronarenderer.freshdesk.com/support/solutions/articles/5000524006-how-to-report-issues-3ds-max). Often it can help to send the scene too, both can be sent via the private uploader - but at very least the minidump would help. Unfortunately, with "Max sometimes crashes on some scenes" there really isn't anything for us to look into and diagnose :(
Tom Grimes | chaos-corona.com
Product Manager | contact us

2019-10-28, 15:47:46
Reply #213

Nekrobul

  • Primary Certified Instructor
  • Active Users
  • ***
  • Posts: 1026
    • View Profile
I am encountering strage looking reflection artifacts on 5RC2 from reflection override.

As a overide is placed HDRI with Native corona collor correction node.

HDRI - https://hdrihaven.com/hdri/?c=nature&h=kiara_5_noon 16k version



Specs

8176 QL1F 2x 64ram W10 MAX 2017SP3

---------------------------------------------------------------
https://www.blackbellstudio.com/
https://www.behance.net/blackbell3d
CEO at "Blackbell Studio"

2019-10-28, 17:06:26
Reply #214

maru

  • Corona Team
  • Active Users
  • ****
  • Posts: 12714
  • Marcin
    • View Profile
I am encountering strage looking reflection artifacts on 5RC2 from reflection override.
Have you tried disabling the adaptive light solver? (Performance tab)
Marcin Miodek | chaos-corona.com
3D Support Team Lead - Corona | contact us

2019-10-28, 18:56:17
Reply #215

Nekrobul

  • Primary Certified Instructor
  • Active Users
  • ***
  • Posts: 1026
    • View Profile
I am encountering strage looking reflection artifacts on 5RC2 from reflection override.
Have you tried disabling the adaptive light solver? (Performance tab)

Will try.

UPD - it worked, need scene or it is a known issue?
---------------------------------------------------------------
https://www.blackbellstudio.com/
https://www.behance.net/blackbell3d
CEO at "Blackbell Studio"

2019-10-29, 08:53:39
Reply #216

aaouviz

  • Active Users
  • **
  • Posts: 882
    • View Profile
    • Another Angle 3D
Hi since updating to RC2 I cannot use DR any more. The slave isn't found by the master PC when searching in the DR dialogue settings...

(I updated to RC2 but had loading issues, so I also did a clean install and updated windows 7, as mentioned above).

Any ideas how to fix this?
Nicolas Pratt
Another Angle 3D
https://www.instagram.com/anotherangle3d/

2019-10-29, 10:03:33
Reply #217

rowmanns

  • Corona Team
  • Active Users
  • ****
  • Posts: 1892
  • Corona for 3ds Max QA Team
    • View Profile
Hi since updating to RC2 I cannot use DR any more. The slave isn't found by the master PC when searching in the DR dialogue settings...

(I updated to RC2 but had loading issues, so I also did a clean install and updated windows 7, as mentioned above).

Any ideas how to fix this?

Hi,

Are there exceptions set in your windows firewall?

Thanks,

Rowan
Please read this before reporting bugs: How to report issues to us!
Send me your scene!

2019-10-29, 10:28:08
Reply #218

bluebox

  • Active Users
  • **
  • Posts: 268
    • View Profile
Hi since updating to RC2 I cannot use DR any more. The slave isn't found by the master PC when searching in the DR dialogue settings...

(I updated to RC2 but had loading issues, so I also did a clean install and updated windows 7, as mentioned above).

Any ideas how to fix this?

This happened to us in Corona 4 as far as I remember. Although searching for slaves did not work, they rendered fine if you just added their names manually before rendering.

2019-10-29, 11:00:40
Reply #219

aaouviz

  • Active Users
  • **
  • Posts: 882
    • View Profile
    • Another Angle 3D
Hi since updating to RC2 I cannot use DR any more. The slave isn't found by the master PC when searching in the DR dialogue settings...

(I updated to RC2 but had loading issues, so I also did a clean install and updated windows 7, as mentioned above).

Any ideas how to fix this?

Hi,

Are there exceptions set in your windows firewall?

Thanks,

Rowan


Hi, thanks. I did this just now. It seemed to work....

However, I tested it in a fresh 3ds max file. Corona found the slave right away. When I open an older working file for a current job and try to search for slaves in this file, nothing comes up... odd behavior!?
Nicolas Pratt
Another Angle 3D
https://www.instagram.com/anotherangle3d/

2019-10-29, 11:10:14
Reply #220

aaouviz

  • Active Users
  • **
  • Posts: 882
    • View Profile
    • Another Angle 3D
Hi since updating to RC2 I cannot use DR any more. The slave isn't found by the master PC when searching in the DR dialogue settings...

(I updated to RC2 but had loading issues, so I also did a clean install and updated windows 7, as mentioned above).

Any ideas how to fix this?

This happened to us in Corona 4 as far as I remember. Although searching for slaves did not work, they rendered fine if you just added their names manually before rendering.

You're right... this does seem to work fine. Thanks (again!)
Nicolas Pratt
Another Angle 3D
https://www.instagram.com/anotherangle3d/

2019-10-29, 11:44:42
Reply #221

bluebox

  • Active Users
  • **
  • Posts: 268
    • View Profile
You're right... this does seem to work fine. Thanks (again!)
Glad I could help :)

2019-10-29, 12:23:09
Reply #222

rowmanns

  • Corona Team
  • Active Users
  • ****
  • Posts: 1892
  • Corona for 3ds Max QA Team
    • View Profile
@bluebox and @aaouviz,

Am I correct in assuming that you are both running Windows 7?

Thanks,

Rowan
Please read this before reporting bugs: How to report issues to us!
Send me your scene!

2019-10-29, 13:53:52
Reply #223

aaouviz

  • Active Users
  • **
  • Posts: 882
    • View Profile
    • Another Angle 3D
@bluebox and @aaouviz,

Am I correct in assuming that you are both running Windows 7?

Thanks,

Rowan

Yes, you are correct. Though, to complicate things; my slave is running Windows 10 while my master is still on 7
Nicolas Pratt
Another Angle 3D
https://www.instagram.com/anotherangle3d/

2019-10-29, 14:04:38
Reply #224

maru

  • Corona Team
  • Active Users
  • ****
  • Posts: 12714
  • Marcin
    • View Profile
I am encountering strage looking reflection artifacts on 5RC2 from reflection override.
Have you tried disabling the adaptive light solver? (Performance tab)

Will try.

UPD - it worked, need scene or it is a known issue?

Please report it using any way you wish. :)
(mail, support, ...)
Marcin Miodek | chaos-corona.com
3D Support Team Lead - Corona | contact us