Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - studiobasler

Pages: [1] 2
1
[C4D] I need help! / Same colors in Photoshop as in VFB
« on: 2023-06-26, 21:59:00 »
Hello Forum,
im struggling with the color workflow for some time now. Since im having a better monitor these days i get noticed the color differences while doing color grading in Photoshop. Im using ACES OT Setting in the vfb Viewer and within C4d everything looks fine. As soon i save the image as openexr and 32 bit and bring it over to Photoshop things are getting worse The image does not look the same. I saw some videos where thy using a plugin called openior to transform between color spaces to get the same look as with the aces workflow, but for some reasons i cant activate the setting within the plugin, maybe corona is not savin in the opencolor format? So how are you handling the image correction worklfow guys, cant be that difficult? Thank You for any advice!

2
[C4D] I need help! / Take Manager Camera Exposure
« on: 2022-11-26, 11:47:42 »
Hello Forum,
can someone explain me how to change Exposure Value when using the c4D take system?
I have a room with different light settings, and i need to render out the images with different exposure values.
For Some reasons the recorded exposure Value seems not to be in the final image. Is it not possible to
record the camera exposure in the take system? Im using c4d 2023 and Corona 9, also tried c4ds r21 with Corona 8, with no luck.

When rendering the image without the take manager everything looks good, so the exposure value must be overwritten from the previous image or so.
Im familiar with the take system and i did not have any problems until today... so im thinking of a bug? Also there is no Icon for the Corona-Camera Tag in the Take Manager
It shows a missing Icon Symbol.

Thank You
Christian

3
Hardware / Good Laptop for working with Corona
« on: 2022-08-04, 08:51:38 »
Hello Guys,
im going to travel for a while and need a good laptop for working with corona. Normally I pass the 64gb in the very beginning of my projects, so the question is if there is a good laptop to buy or is this not possible in this case? Most of the laptops are just having max 64 gb of ram. Any advices?

Cheers
Christian

4
[C4D] Bug Reporting / Downward compatibility
« on: 2020-09-03, 08:48:05 »
Hello,
when saving a szene build with corona 6 and reopen it with corona 5, there will come a error message like "error in filestructure" or in german "Fehlerhafte Dateistruktur" and file cant be open. Just for letting you know.

Christian

5
Hello Forum,
im rendering a interior animation, classical curtain in the wind animation with a alembic file out of marvelous designer. To keep rendertime fast i just want to render the specific region. therefore i defined the render region in c4d rendersettings. But unfortunately corona hang up while calculating secondary gi uhd cache. If i render the hole image without defining the render region everything work fine, or if i defined the render region via the vfb picture viewer it works also. Any ideas? Is it possible to define a render region with the vfb picture viewer which do not get lost on every new frame? Im working in R18, but did a test on R21 too with Corona 5 HF2.

Thank you
Christian

6
Gallery / Villa Design
« on: 2019-06-25, 15:52:20 »
Hello Forum,
this is the latest Project i did for a client.

Modern Villa Visualisation
Location: Munich
Software: Cinema4D, Corona 4.0, PS, LR

Thank you for watching.
Christian

7
General CG Discussion / Backplates for interior renderings
« on: 2019-06-24, 20:37:32 »
Hello Forum,
can anyone give me a tip where to find high qualitiy backplates which can be used for high resolution interior renderings? I have a hugh amount of different situations and therefore i have to use different kind of backgrounds like backyards, gardens and city-scapes. can anyone give me some good sources similar to sites like vishopper.

Thank you
Christian

8
Hello Forum,
so with the newest Daily Build im getting a very unsharp result after denoising. I read about the high quality filter which should not be used together with the high quality denoiser. Is that correct? Also when i do not use the hight quality filter and just put on denoiser, im getting also a very splochi result. Please have a look at the both preview renderings.

Thank You
Christian

9
[C4D] Bug Reporting / Motion Blur kills reflections
« on: 2019-03-13, 08:18:19 »
Hello Forum,
if i turn on object motion blur it do not render any reflections on "some" windows any more. If  i turn motion blur off everything is fine. I have a static movement of the sky object in beause i want to render out different light situations with the take system. Also there are appearing some of my trees on places i  didnt not place them. I had this before when i was using instances and Motion blur. Is this a known bug?

Thank you
Christian

10
[C4D] Bug Reporting / C4D Noise under Layer-Node not working
« on: 2019-03-01, 12:28:40 »
Hello Corona,
so if i put a layer node into bump slot and add a standard c4d noise, this is not showing up in the interactive Renderer.
Can anybody confirm this?

This is the version iam using:
Full-speed non-debug version
Build timestamp: Jan 24 2019 17:35:03
Version: 4.0 daily Jan 24 2019 (core 3)
Cinema version: CINEMA 4D Studio R18.057 S
Plugin status: initialized successfully

Thank You

11
Hello Forum,
maybe i missed somethng, but why do i get these differences(Artifacts) when rendering in IR-Mode and in VFB. The IR looks also a lot more blurry than in VFB. Im using  HQ Denoising and lightning via sky object and a hdr. Its just a testscene with a few materials. Never had this before... I also testet it in different Versions of C4d and also with different hdr maps.

Im using Corona Version 3.

Thank You


12
[C4D] General Discussion / Render Organisation
« on: 2018-10-11, 11:28:01 »
Hello Forum,
so i would like to know how you handle big Projects with a lot of diffrent cameras, Lightning etc. I do have to render about 30 images on a render farm. Has anyboy some advices how to set up so i can send it to the farm? Do i have to set keyframes an change Kamera Lightning etc. via the stage object, or is it possible to feed the Render Manager with all the particular settings? Would be nice to hear some experiences.

Thank you
Christian

13
[C4D] Feature Requests / Autotiling for Big Size Renderings
« on: 2018-09-08, 11:29:23 »
Hello Forum,
so i wish to have something like a autotiling for biger sizes. I often do renderings with about 20000px and currently it is not possible to render this resolution until i tile the image in more than 10 pices via tiled camera script. Maybe it is possible to split the image in multiple parts so that rendering is possible without tiling manually every time. I do have 120 GB of Ram but its not possible to render images in this size. So this would be a hugh time saver.

Thank you for all your effort
Christian

14
[C4D] General Discussion / Tiled Camera and Backplate
« on: 2018-01-24, 20:49:29 »
Hi Forum,
so i once again have to render a big resolution image. The last time i rendered with the tiled camera solution which works perfect. This time i have to change the background and this seems to be a problem when working with the tiled camera and the Corona environment overrides. I set up a different Background and link it to the "Direct visibility override" with Frontal Mapping in Corona settings. If i now render with the tiled camera the background repeats for every slice i render. see the images for clearing things up. Does anyone have a solution on this? I thought i could manage it if i render the image with alpha mask an then compose the backplate in photoshop, but this dosnt work also because the alpha channel is very chunky at the edges. I get a 1px white line all around my masked objects. Please have a look at the image in attachment. I currently have no idea how to solve this issue and hopefully someone run into the same problem and have a tip for me.

Thank you
Christian

15
Is it possible to add the feature Cast Shadow and Send Shadow like in Vray for the compositing Tag? Currently it is possible to exclude a object from Shadow, but sometimes its helpfull if a objects receive shadow but dont generate them.

Thank you

Pages: [1] 2