16
[C4D] Bug Reporting / Re: Proxy causing viewport to freeze for a while
« on: 2019-04-01, 12:08:24 »
Thank you!
Henrik
Henrik
2024-04-19, 06:12:58
News:
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
17
[C4D] Bug Reporting / Re: Proxy causing viewport to freeze for a while
« on: 2019-03-30, 20:53:23 »
Me again
I remembered that i had an old mac book from 2014 and tried it there... no problem at all. Could that mean it has to do with the graphic cards in windows? Mi first computer has a ASUS Geforce GTX 970 STRIX 4GB.
Thanks
Henrik
I remembered that i had an old mac book from 2014 and tried it there... no problem at all. Could that mean it has to do with the graphic cards in windows? Mi first computer has a ASUS Geforce GTX 970 STRIX 4GB.
Thanks
Henrik
18
[C4D] I need help! / Re: How to find missing vray material shaders
« on: 2019-03-26, 18:54:19 »
Hi,
Thanks for your reply.
Well, obviously I haven't because the window is telling me just that ;)
But, i have looked more into it and did find the reason why i had the problem i think. It was the material shown in the 2 screen shots.
The first thing was that originally the material had the Reflection tab not active under "basic", which makes it hard to find when you click through all the materials looking for the <VR> in the texture slot.
But i also just found out that when i don't have Vray installed and the material has a texture in the vray shader, the texture doesn't appear in the Texture Manager at all which makes it even harder to find.
One screen shot is from my new computer without vray installed and the other screen shot is from my old computer with vray installed. I was hoping not to have to install vray again so i could keep my new c4d as clean as possible.
And, it's not a big deal, usually only happens when i work quick and dirty. It would just be nice to know if there is a quick way to find those hidden shaders/textures :)
Cheers,
Henrik
(and I realize that it's more a C4D issue than a Corona issue. Actually it's not a Corona issue at all :)
Thanks for your reply.
Well, obviously I haven't because the window is telling me just that ;)
But, i have looked more into it and did find the reason why i had the problem i think. It was the material shown in the 2 screen shots.
The first thing was that originally the material had the Reflection tab not active under "basic", which makes it hard to find when you click through all the materials looking for the <VR> in the texture slot.
But i also just found out that when i don't have Vray installed and the material has a texture in the vray shader, the texture doesn't appear in the Texture Manager at all which makes it even harder to find.
One screen shot is from my new computer without vray installed and the other screen shot is from my old computer with vray installed. I was hoping not to have to install vray again so i could keep my new c4d as clean as possible.
And, it's not a big deal, usually only happens when i work quick and dirty. It would just be nice to know if there is a quick way to find those hidden shaders/textures :)
Cheers,
Henrik
(and I realize that it's more a C4D issue than a Corona issue. Actually it's not a Corona issue at all :)
19
[C4D] I need help! / How to find missing vray material shaders
« on: 2019-03-25, 17:30:22 »
Hi
Since i moved from vrayforc4d to corona i have been haunted by the little window in the attachment.
Nothing strange with that, i understand why the window appears. I usually manage to convert or replace most of the materials but some times some v-ray advanced bitmaps manage to hide them self in one or several materials.
Does anyone know a quick way to find those little advanced bitmaps?
Thanks in advance.
Henrik
Since i moved from vrayforc4d to corona i have been haunted by the little window in the attachment.
Nothing strange with that, i understand why the window appears. I usually manage to convert or replace most of the materials but some times some v-ray advanced bitmaps manage to hide them self in one or several materials.
Does anyone know a quick way to find those little advanced bitmaps?
Thanks in advance.
Henrik
20
[C4D] Bug Reporting / Re: Proxy causing viewport to freeze for a while
« on: 2019-03-25, 16:55:29 »
Hello again!
I finally bought a new computer (mostly because of other reasons :) and was hoping a new fresh install of everything would help in this issue but unfortunately the problem is still there, exactly the same.
The computer i bought was with a Threadripper 2990WX 32-Core processor, 64 GB RAM and a NVIDIA GeForce RTX 2060.
Best regards
Henrik
I finally bought a new computer (mostly because of other reasons :) and was hoping a new fresh install of everything would help in this issue but unfortunately the problem is still there, exactly the same.
The computer i bought was with a Threadripper 2990WX 32-Core processor, 64 GB RAM and a NVIDIA GeForce RTX 2060.
Best regards
Henrik
22
[C4D] Bug Reporting / Proxy causing viewport to freeze for a while
« on: 2019-02-08, 17:21:20 »
Hi,
I'm not sure if I'm doing something wrong but it has been going on for some time now and that is that my viewport freezes for a while when I have corona porxies in my scene.
It only happens when I switch from perspective view to top view and not vice versa. With one proxy with a 250MB file inside it freezes about 4 seconds. With 8 of those it freezes about 32 seconds. Makes no difference if I use "Cache in RAM" or not, neither what visualisation method. I use a 4 view panel and i switch between them with the F-keys.
So everything goes smooth when proxies are loaded, no problem at all. It's only when I switch from perspective view to top view but that happens quite often unfortunately :(
Thankful for any help!
Best regards
Henrik
I'm not sure if I'm doing something wrong but it has been going on for some time now and that is that my viewport freezes for a while when I have corona porxies in my scene.
It only happens when I switch from perspective view to top view and not vice versa. With one proxy with a 250MB file inside it freezes about 4 seconds. With 8 of those it freezes about 32 seconds. Makes no difference if I use "Cache in RAM" or not, neither what visualisation method. I use a 4 view panel and i switch between them with the F-keys.
So everything goes smooth when proxies are loaded, no problem at all. It's only when I switch from perspective view to top view but that happens quite often unfortunately :(
Thankful for any help!
Best regards
Henrik
23
[C4D] Resolved Bugs / Re: UVW Randomizer - New randomization every time i press render
« on: 2018-08-27, 11:29:40 »
My customer hasn't noticed so there is no stress for me :)
Have a very nice day!
Have a very nice day!
24
[C4D] Resolved Bugs / Re: UVW Randomizer - New randomization every time i press render
« on: 2018-08-21, 22:38:46 »What happens when you enter another seed value than 0?Ah, that is worth a try. I will do so next week when I’m at the office again.
Thanks for the tip!
25
[C4D] Resolved Bugs / Re: UVW Randomizer - New randomization every time i press render
« on: 2018-08-21, 16:18:22 »
Thanks for telling!
Have a great day!
Have a great day!
26
[C4D] Resolved Bugs / Re: UVW Randomizer - New randomization every time i press render
« on: 2018-08-21, 13:05:53 »
Hi! Of course, happy if i can help!
Just uploaded it and i think it worked. It said i should post the filename, so here it is: 1534849254_UVW-Randomizer.zip
I installed the last corona version and i still have the problem.
Build timestamp: Aug 15 2018 15:37:48
Version: B2 daily Aug 15 2018 (core 3 (DailyBuild Aug 15 2018))
Cinema version: CINEMA 4D Broadcast R19.053 S
Just uploaded it and i think it worked. It said i should post the filename, so here it is: 1534849254_UVW-Randomizer.zip
I installed the last corona version and i still have the problem.
Build timestamp: Aug 15 2018 15:37:48
Version: B2 daily Aug 15 2018 (core 3 (DailyBuild Aug 15 2018))
Cinema version: CINEMA 4D Broadcast R19.053 S
27
[C4D] Resolved Bugs / UVW Randomizer - New randomization every time i press render
« on: 2018-08-21, 10:36:35 »
Hi!
Not sure if this is a bug or not but every time i press render my floor texture moves and i get a different pattern. I'm applying the material to a cloner object and i'm using "instance" mode under UVW Randomization in the UVW randomize shader.
I hope my screen shot can clarify it better.
Build timestamp: Aug 6 2018 23:17:54
Version: B2 daily Aug 6 2018 (core 3 (DailyBuild Aug 3 2018))
Keep up the great job!
Regards,
Henrik
Not sure if this is a bug or not but every time i press render my floor texture moves and i get a different pattern. I'm applying the material to a cloner object and i'm using "instance" mode under UVW Randomization in the UVW randomize shader.
I hope my screen shot can clarify it better.
Build timestamp: Aug 6 2018 23:17:54
Version: B2 daily Aug 6 2018 (core 3 (DailyBuild Aug 3 2018))
Keep up the great job!
Regards,
Henrik
28
[C4D] Daily Builds / Re: Corona for Cinema 4D Beta 2 daily build
« on: 2018-08-10, 11:04:02 »
Wohooo!! Great new features! Thank you guys!
I might have missed something but does one require C4D's native "hair-object" to make corona hair work? I just have C4D Broadcast and don't think i have the "hair-object". Will i have to upgrade to C4D Studio then? Not that i mind paying for it, Maxon is doing a good job as well :) just haven't missed any of the futures of Studio so far.
Henrik
I might have missed something but does one require C4D's native "hair-object" to make corona hair work? I just have C4D Broadcast and don't think i have the "hair-object". Will i have to upgrade to C4D Studio then? Not that i mind paying for it, Maxon is doing a good job as well :) just haven't missed any of the futures of Studio so far.
Henrik
29
[C4D] General Discussion / Re: Cinema 4D's Take System and Corona Renderer VFB
« on: 2018-03-21, 13:44:58 »
Oh, that is exactly the same way i wanted to work but i didn't know there was a way!
Thank's for clarifying!
Thank's for clarifying!
30
[C4D] Resolved Bugs / Re: Laubwerk plants and Corona Proxy
« on: 2018-02-02, 17:53:51 »
Super! Thank you! Have a nice week end!
Henrik
Henrik