16
[C4D] General Discussion / Re: Separate Displacements on Separate Layers of Layered Material
« on: 2021-09-30, 18:33:17 »
Oops!! :) I'm so sorry I opened a 3ds Max question in C4D thread, got my answer anyways.
2024-04-23, 22:40:19
News:
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
17
[C4D] General Discussion / Re: Very slow movement during interactive render with RTX 3090
« on: 2021-09-30, 18:30:15 »
I'm not a C4d user and I have no experience on this software, however many people in 3ds Max side do suffer from the same frustrating experiences. What I often tell them is, 25Million polygons is nothing for a graphics card to actually "shade" the scene, but it is the topology modifiers or sorts of calculations "which depend on the CPU", causing these lags.
You can benefit from your GPU on applications like Lumion or during the rendering of GPU renderers like Iray, Vray GPU, Octane etc.
Most parts of these software don't even benefit the patented technologies of the CPU's, with glamorously shining names and still rely on the raw CPU power.
You can benefit from your GPU on applications like Lumion or during the rendering of GPU renderers like Iray, Vray GPU, Octane etc.
Most parts of these software don't even benefit the patented technologies of the CPU's, with glamorously shining names and still rely on the raw CPU power.
18
[C4D] General Discussion / Re: Separate Displacements on Separate Layers of Layered Material
« on: 2021-09-30, 18:03:08 »Hello,
you can try "stacking" the material - applying both of them on the same object (2 texture tags rather than a layered material) with an opacity map and some UV offset tweaking, the resulting displacement is an addition of the two materials.
Thanks and let me know if you need further information,
Jan
I couldn't get a clear picture of "stacking" and "texture tags", can you detail this a little more?
19
[C4D] General Discussion / Separate Displacements on Separate Layers of Layered Material
« on: 2021-09-30, 13:28:05 »
I need two displacement maps on two separate materials of a Corona layered material.
In the image I have a base material of a human body and two different layers of scar tissue applied by radial gradient masks. Diffuse maps seem to combine well with masks but I can't manage to assign a displacement map along with other maps.
Is there a limitation or an I missing something?
In the image I have a base material of a human body and two different layers of scar tissue applied by radial gradient masks. Diffuse maps seem to combine well with masks but I can't manage to assign a displacement map along with other maps.
Is there a limitation or an I missing something?
20
[Max] I need help! / Gradually Hiding (Fade Out) Objects with Certain Materials
« on: 2021-09-17, 12:30:08 »
I need to fade out a Shadow Catcher floor plane and I've tried lowering the visibility or blending the material with some transparent material. None of them seems to work. (Shadows disappear instantly) Is it not possible within 3ds Max with Corona Renderer?
21
[Max] I need help! / Re: Problem with PNG maps
« on: 2021-09-17, 12:22:28 »
I think you can consider resizing the UVW Map gizmo to keep the border outside the object.
The border naturally occurs due to the fact that the image has a border and the area other than the image is some other color, which eventually results in a depth or height depending on the tonal difference.
The border naturally occurs due to the fact that the image has a border and the area other than the image is some other color, which eventually results in a depth or height depending on the tonal difference.
22
[Max] Feature Requests / Rendering a Set of Scene Objects Individually with Shadows, Reflections etc.
« on: 2021-08-29, 10:10:22 »
This is an old feature I used to benefit a lot with Mental Ray, named as "Render Subset of Scene/Masking"
There are times we need to add people, plants or other objects after an animation rendering is completed. The Render Selected feature can be used to render objects separately with alpha, but this way you can't have shadows, reflections, GI effects of the object in relation to the existing surrounding objects. Adding Shadow Catcher Material to the rest of the objects can help render shadows but it requires extra work and poses a risk of saving the scene with Shadow Catcher Materials assigned, unless you save it with another name.
I'd be more than happy to have this feature at hand.
There are times we need to add people, plants or other objects after an animation rendering is completed. The Render Selected feature can be used to render objects separately with alpha, but this way you can't have shadows, reflections, GI effects of the object in relation to the existing surrounding objects. Adding Shadow Catcher Material to the rest of the objects can help render shadows but it requires extra work and poses a risk of saving the scene with Shadow Catcher Materials assigned, unless you save it with another name.
I'd be more than happy to have this feature at hand.
23
[Max] I need help! / Re: Urgent Help Needed on a Scene Crashing at Every Few Frames
« on: 2021-07-16, 15:19:34 »
* * * I really appreciate your efforts * * *
* T H A N K Y O U ! *
**********************************
:D :D :D
Rendering is moving on.
* T H A N K Y O U ! *
**********************************
:D :D :D
Rendering is moving on.
24
[Max] I need help! / Re: shadow catcher
« on: 2021-07-15, 09:21:28 »
This doesn't seem wrong actually, if I get it right.
The lights are area lights and lights of this size normally cast this type of shadows.
You can try the light's Directionality parameter to make the light rays parallel.
See if it helps.
Or simply reduce the light rectangle's size and/or move the light away from the object.
The lights are area lights and lights of this size normally cast this type of shadows.
You can try the light's Directionality parameter to make the light rays parallel.
See if it helps.
Or simply reduce the light rectangle's size and/or move the light away from the object.
25
[Max] I need help! / Re: Urgent Help Needed on a Scene Crashing at Every Few Frames
« on: 2021-07-15, 09:17:07 »Here is a screenshot : https://prnt.sc/18zxp1a
Try deleting this & your scene will not crash anymore.
(Report ID=CRMAX-779)
[/quote]
It worked in this case but I needed a force to pust the particles in the right direction. I tried Gravity and the same thing seems to happen.
Any progress in determining the reason under this. Any ideas on what I can use to force these particles without crashes?
26
[Max] Bug Reporting / UHD Cache File Performance Degradation by Rendering Progression
« on: 2021-07-13, 07:33:21 »
While I use UHD Cache as secondary algorithm, with,
Animation (Flicker Free)
Try to Load +Append
Save to File
options,
rendering time is improved compared to when each frame is rendered from scratch.
The file size normally increases by time but the rendering time, first decreases gradually but increases as the rendering progresses without any noticaeble quality difference compared to the same frame rendered with a new UHD Cache file.
In a current scene I left the machine to render during the night and after about 200 frames, the rendering time was 2.09 at frame 2048.
I chose a new cache file and restarted. After the first frame is complete, rendering time is 1.07. Almost a minute of performance gain doubling the previous.
Normally rendering from the new UHD Cache file presents a very slight difference in overall image brightness but luckily it is not noticeable in my current scene and I moved on with the new cache file.
Previously it was reported that rendering would take about ten hours (which was stretching towards a clean 11-12 hours. It is now 6.30 hours left.
I believe there is no resource problem in the machine rendering this scene. With a totally fresh 2 TB's of SSD drive and a total of 128 GB's of RAM.
I would love to draw a performance/time graph by but I'm kind of busy right now. It seems to go down a soft slope.
ps. The Captcha window in the ticketing system has a problem in my browser (Chrome) its vertical size is limited to the Captcha area. You have to move a slider to see the blocks. It doesn't verify anyway.
Best regards.
Animation (Flicker Free)
Try to Load +Append
Save to File
options,
rendering time is improved compared to when each frame is rendered from scratch.
The file size normally increases by time but the rendering time, first decreases gradually but increases as the rendering progresses without any noticaeble quality difference compared to the same frame rendered with a new UHD Cache file.
In a current scene I left the machine to render during the night and after about 200 frames, the rendering time was 2.09 at frame 2048.
I chose a new cache file and restarted. After the first frame is complete, rendering time is 1.07. Almost a minute of performance gain doubling the previous.
Normally rendering from the new UHD Cache file presents a very slight difference in overall image brightness but luckily it is not noticeable in my current scene and I moved on with the new cache file.
Previously it was reported that rendering would take about ten hours (which was stretching towards a clean 11-12 hours. It is now 6.30 hours left.
I believe there is no resource problem in the machine rendering this scene. With a totally fresh 2 TB's of SSD drive and a total of 128 GB's of RAM.
I would love to draw a performance/time graph by but I'm kind of busy right now. It seems to go down a soft slope.
ps. The Captcha window in the ticketing system has a problem in my browser (Chrome) its vertical size is limited to the Captcha area. You have to move a slider to see the blocks. It doesn't verify anyway.
Best regards.
27
[Max] I need help! / Re: Urgent Help Needed on a Scene Crashing at Every Few Frames
« on: 2021-07-10, 23:56:07 »
Thank you very much indeed Avi, and all of the team.
That was invaluable. I might think of the particles but I would never think of the wind spacewarp causing this.
I have to find a way to push the particles now.
I am very grateful.
That was invaluable. I might think of the particles but I would never think of the wind spacewarp causing this.
I have to find a way to push the particles now.
I am very grateful.
28
[Max] I need help! / Re: Urgent Help Needed on a Scene Crashing at Every Few Frames
« on: 2021-07-03, 06:57:49 »
I've sent the minidmp files, presumably containing the crash data from this scene yesterday and also sent a 2021 zip file(Ihope). I don't have MAx 2021 myself but saved to Max 2021 to test on other PCs.
Today I am sending the minidmp file from a friends pc with the file rendering the scene in 2021. It may be the most accurate file. I couldn't find the other two error log files (xml) for this one.
This is the file name with the usual upload method:
1625288342_SCENE1-FINAL2021-file-withminidmp.rar
Today I am sending the minidmp file from a friends pc with the file rendering the scene in 2021. It may be the most accurate file. I couldn't find the other two error log files (xml) for this one.
This is the file name with the usual upload method:
1625288342_SCENE1-FINAL2021-file-withminidmp.rar
29
[Max] I need help! / Re: Urgent Help Needed on a Scene Crashing at Every Few Frames
« on: 2021-07-02, 12:13:55 »
Scene1_final2022.zip
It is a max archive.
I've rendered the substance maps to bitmap files and simplified the material. Still crashing in a few frames.
It is a max archive.
I've rendered the substance maps to bitmap files and simplified the material. Still crashing in a few frames.
30
[Max] I need help! / Re: Urgent Help Needed on a Scene Crashing at Every Few Frames
« on: 2021-07-02, 10:30:57 »
I need to add one more thing:
I have rendered this scene until around frame 400. Right now I started rendering from frame 558. Crashed at 560. Frames after 400 are causing crashes.
Rendering this scene on a Dell Prec.7810 ws. Dual Xeon E52640V3. I also tested on an I7 3930 K and a Ryzen Threadripper PC. (Don't know exact specs.) That's a friend's PC.
Right now started from 561, rendered 562, saved and crashed.
I have rendered this scene until around frame 400. Right now I started rendering from frame 558. Crashed at 560. Frames after 400 are causing crashes.
Rendering this scene on a Dell Prec.7810 ws. Dual Xeon E52640V3. I also tested on an I7 3930 K and a Ryzen Threadripper PC. (Don't know exact specs.) That's a friend's PC.
Right now started from 561, rendered 562, saved and crashed.