Messages

16

Hardware / Re: Threadripper & Ryzen only builds (3rd Gen starts on page 50)

« on: 2024-02-22, 17:45:20 »

Yes I feel 7980x is much more snappy! I haven't tried with Corona yet, only the Benchmark. Yeah transferring with Star Link will take some time. 7000 series would probably be better for mobile than 3990x since it can be cooled better.

Just pulled the G.Skill 128GB kit out and replaced with 192GB kit.  BIOS is set only at defaults, ram is only running at 4800.  Even with that the system is fast, 34k with Corona.  Once I set ram to 6400 and OC I can't wait to see the performance boost.  I'm expecting 2x 3990x. But the 7980x machine is finishing out a job right now.

I would go just go with 7980x if you can, plus I think it cools better.

Once I get time to Benchmark the 3990x vs the 7980x I'll post some results.

17

Hardware / Re: Threadripper & Ryzen only builds (3rd Gen starts on page 50)

« on: 2024-02-22, 07:36:39 »

Not yet, hate that you loose warranty and they can tell but I'll probably still do it. I think I can get another 20% performance without going to crazy. Right now I'm getting 34k on Corona benchmark and temps are mid 50's.

Dang, only mid 50s full load? That's beyond impressive :)

Yeah that OC fuse is a rather interesting addition to things. According to a statement from AMD they will respect the warranty IF it did not die from OCing (regardless of the fuse) - but how they'll figure that out I do not know :)

yeah rendering on Corona benchmark I was pulling 34k at 54.4 temp.

18

Hardware / Re: Threadripper & Ryzen only builds (3rd Gen starts on page 50)

« on: 2024-02-20, 16:50:42 »

Not yet, hate that you loose warranty and they can tell but I'll probably still do it. I think I can get another 20% performance without going to crazy. Right now I'm getting 34k on Corona benchmark and temps are mid 50's.

19

Hardware / Re: Threadripper & Ryzen only builds (3rd Gen starts on page 50)

« on: 2024-02-20, 10:43:32 »

I've run the Noctua NH-U14S TR4-SP3 on my 3990x and it is a great if not the best air cooler for it. I ran it with upgraded fans for better cooling. I then switched to the Silverstone IceGem 360 with upgraded fans, runs even better. I'm running the Silverstone IceGem 360 now on 2 3990x workstations and one 7980x workstation.

20

Hardware / Re: Threadripper & Ryzen only builds (3rd Gen starts on page 50)

« on: 2024-02-09, 21:39:22 »

F5-6400R3239G48GQ4-ZR5NK
Zeta R5 Neo
DDR5-6400 CL32-39-39-102 1.40V
192GB (4x48GB)
AMD EXPO

You cannot get the 192GB kit anywhere! ugh... Going to have to go with 128GB

21

Hardware / Re: Threadripper & Ryzen only builds (3rd Gen starts on page 50)

« on: 2024-02-04, 20:04:07 »

Damn, I need to update my RDIMM knowledge before I confuse people :- ) Super sorry about this.
Anyway, looks like Threadrippers 7xxx even non-pro require RDIMM memory, so for G.Skill, that would be their Zeta R-series, not the Z5 series.

And yup, that's the https://www.newegg.com/g-skill-192gb/p/N82E16820374533?item=N82E16820374533&source=region

1600 USD you quoted above, uff.

You can always go for generic stuff like https://www.newegg.com/nemix-ram-256gb/p/1X5-003Z-01FM5 (1000 USD for 256GB DDR5 RDIMM 5600)
But I would probably buy the G.Skill for those Samsung ICs if I was building state-of-art workstation.

Good catch on the RDIMM, I myself didn't look that far into it. I would definitely go for the G.Skill then.

22

Hardware / Re: Threadripper & Ryzen only builds (3rd Gen starts on page 50)

« on: 2024-02-04, 19:10:31 »

G.Skill Trident Z5 series uses Samsung chips, and is among probably the most high-end kits on market right now. I can't imagine it not working :- ) If these wouldn't, none would.

That doesn't mean it will run at their XMPP/DOCP settings, and G.Skill validated those numbers for Intel Alder-Lake desktops. So you will be on your own to figure out the best stable configuration.

Thanks for the quick reply Juraj. I was thinking there shouldn't be a issue. Out of curiosity, what RAM would you go with? The difference is $680 versus ECC $1,600.

23

Hardware / Re: Threadripper & Ryzen only builds (3rd Gen starts on page 50)

« on: 2024-02-04, 18:25:23 »

Has anyone built a 7980x yet? I'm thinking of building one, but I would like to use non-ECC RAM. I've used non ECC RAM for years now and never had an issue, also saved a ton of money. I was wondering if you think this ram would work with the Asus TRX50 "G.SKILL Trident Z5 RGB Series 96GB (2 x 48GB) 288-Pin PC RAM DDR5 6400 (PC5 51200) Desktop Memory Model F5-6400J3239F48GX2-TZ5RK". I would get 2x for 192GB. What's your thoughts?

24

Hardware / Re: Threadripper & Ryzen only builds (3rd Gen starts on page 50)

« on: 2023-12-04, 20:14:28 »

Thanks juraj for that informative post. I guess I should have been more specific. The system would be for final renders of animations. For what we would use this system for it would be feasible to render animations solely on it if it was three times faster than a 3990X. So this is why I'm trying to find a single system with hopefully that performance or more. Like I said from the benchmarks it's really hard to tell what the performances compared to a 3990x. So that's why I'm asking here.

25

Hardware / Re: Threadripper & Ryzen only builds (3rd Gen starts on page 50)

« on: 2023-12-03, 21:28:44 »

I am looking for a upgrade to my 3990x's for rendering. I need something at least 3 times faster than a single 3990x.  Been looking at the new 7980x to try to figure out the difference between that and a 3990x. But since benchmarks don't give you results in seconds it's kind of hard to tell.  Is it twice as fast? less? I'm looking at a 7995wx ultimately since this will be the fastest.  What do you guys think between the 3990x and the 7980x? That will maybe give me a good indicator of that the 7995wx is capable of.

26

Gallery / Re: Dunlap Hollow A-Frame

« on: 2023-12-03, 21:22:45 »

I like the dented metal roof, what textures are those if you don't mind me asking? would like to download them.

Great renders by the way, love the mood

27

[Max] Daily Builds / Re: Tiles playground

« on: 2023-11-21, 19:07:11 »

Fully procedural garden path with Corona tiles.

Would you please be able to upload this scene for us to try out?

I managed to significantly simplify the setup, previously it was unnecessary complicated. With the addition of conform modifier in Max 2024.2 update, the setup should remain fully procedural even on arbitrary shaped terrain (didn't test that myself yet).

thank you so much for putting that together!

28

[Max] Daily Builds / Re: Tiles playground

« on: 2023-11-17, 16:50:52 »

Fully procedural garden path with Corona tiles.

Would you please be able to upload this scene for us to try out?

29

Hardware / Re: Threadripper & Ryzen only builds (3rd Gen starts on page 50)

« on: 2023-08-17, 18:35:34 »

I was hoping we would see below options for new generations. Things are moving so slowly with CPU's, almost 4 years later from the original 64 core just to double the performance... Ugh... Meanwhile GPU's

Non-Pro - 96 core

Pro - 128 Core

30

Hardware / Re: Threadripper & Ryzen only builds (3rd Gen starts on page 50)

« on: 2023-08-14, 21:07:34 »

Update,  AIO was definitely loose surprisingly.  I tighten them down hard when I install. Tightened it all back down again, ran again and the temps are just as bad.  Ordering a replacement SilverStone IceGem 360 right now.