1
[C4D] General Discussion / Re: ACES 2 ?
« on: Yesterday at 15:36:18 »
Yeah for me too, in that side by side I'd have taken the left one as being "new and improved" haha, but turns out that's the old one - and I very much prefer it :O
2025-07-19, 02:07:43
News:
Having trouble verifying your license? If you are seeing a license verification message or are unable to access your Chaos products, please follow these simple steps to fix sign-in issues. If you have already tried this and are still unable to access your Chaos products, please contact Support.
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
[C4D] General Discussion / Re: Sharing models with textures via .vrmesh between C4D and 3ds Max? Possible?
« on: 2025-07-17, 17:09:46 »
There's nothing created specifically to do this - but Corona now does have export to vrscene for Vantage, and it has load vrscene for Enscape. Therefore it MIGHT be possible to use the first to save a vrscene, and the second to load it - but do keep in mind the "subset" of vrscene capabilities created for both was for a very specific reason, ie to send to Vantage specifically, and to load from Enscape specifically. You can try it and see though ;)
EDIT I will add, in case it is not clear from the above, that "save from C4D and load into Max (or vice versa)" is neither an intended nor supported workflow for these functions :) If it works, even to some extent, then bonus, and if it doesn't work, it is NOT a bug or issue.
EDIT I will add, in case it is not clear from the above, that "save from C4D and load into Max (or vice versa)" is neither an intended nor supported workflow for these functions :) If it works, even to some extent, then bonus, and if it doesn't work, it is NOT a bug or issue.
3
[Max] I need help! / Re: Corona to Vantage animation exposure issue
« on: 2025-07-17, 13:27:57 »
I believe this should work, did for me.
In Max with your scene set up and ready to go, start Live Link. Adjust the exposure.
In Max, stop Live Link.
Now use Vantage Anim. Export, set your animation parameters in the Vantage dialog, and it should render with the exposure you set through the Live Link.
Let me know if that works for you.
PS - once the animation had completed rendering, Vantage itself went back to displaying the "too bright" exposure, but all the animation frames were saved with the adjusted correct Vantage exposure.
In Max with your scene set up and ready to go, start Live Link. Adjust the exposure.
In Max, stop Live Link.
Now use Vantage Anim. Export, set your animation parameters in the Vantage dialog, and it should render with the exposure you set through the Live Link.
Let me know if that works for you.
PS - once the animation had completed rendering, Vantage itself went back to displaying the "too bright" exposure, but all the animation frames were saved with the adjusted correct Vantage exposure.
4
[C4D] I need help! / Re: Motion blur on Liquid Mesh
« on: 2025-07-17, 12:35:00 »
Just to clarify, motion blur doesn't work where the number of vertices etc. changes. Deforming geometry is fine, but anything where the object is in effect "a different object" in the next frame doesn't work.
5
[Max] I need help! / Re: Random by tile - brightness variations and mushy seams
« on: 2025-07-17, 12:33:32 »
On the suggestions for new things in the randomizer (such as wiggliness), please post over on the Ideas Portal at https://chaoscorona.ideas.aha.io/ as that is where we track all user suggestions (and also makes it easy for other users to vote for the suggestions so we know which are the most in demand). Thanks!
6
[C4D] I need help! / Re: Scene parsing time extremely long
« on: 2025-07-17, 12:31:21 »
Glad you found a solution, and ty for posting what that solution was, which can be a big help to anyone else experiencing anything similar. Cheers!
7
[C4D] I need help! / Re: TEAM RENDERING ISSUE - PLEASE HELP!
« on: 2025-07-16, 21:25:14 »
Render Node pricing is at https://www.chaos.com/corona/render-nodes#pricing
This happened with Corona 8, in 2022 and announced in advance in 2021 at https://www.chaos.com/blog/corona-in-2022-new-features-visuals-licensing-and-more
As described there, anyone who had a subscription before 8, and who kept that subscription active without a break, still gets the 3 free render nodes that came with earlier versions of Corona up to and including today. Any subscriptions started since the release of 8 though do not include additional render nodes.
This happened with Corona 8, in 2022 and announced in advance in 2021 at https://www.chaos.com/blog/corona-in-2022-new-features-visuals-licensing-and-more
As described there, anyone who had a subscription before 8, and who kept that subscription active without a break, still gets the 3 free render nodes that came with earlier versions of Corona up to and including today. Any subscriptions started since the release of 8 though do not include additional render nodes.
8
[Max] I need help! / Re: LED Strip and noise levels
« on: 2025-07-16, 15:23:18 »
Scatter actual lights along a spline? Also the Light Material should be fine used as a main light source, it's Self Illumination in a Physical Material that shouldn't be used as main lighting. In fact Light Material performs the same as an actual light of that shape, except in the case of spheres as the Spherical Light is a mathematically perfect sphere so can be calculated faster.
9
[C4D] I need help! / Re: Scene parsing time extremely long
« on: 2025-07-15, 18:03:29 »
You are welcome! The support team can dig into the scene once they have a copy, to see what is going on (something they wouldn't be able to diagnose without the scene itself, in a case like this).
10
[Max] General Discussion / Re: Are people starting to ditch Forest Pack for Chaos Scatter?
« on: 2025-07-15, 18:01:20 »I dont think so, chaos scatter lacks many tools, too bad developers don't listen carefully or development is very slow.
Neither :) It's that Scatter is not, and has never been, seen as a way to "replace" Forest Pack. The intention is pretty much what people describe above - to give, for free, a tool that works in a great many cases, so that many people don't need anything else and can also have a simplified workflow; and when extra control is needed then there are indeed third party plugins. Of course, we do keep enhancing what Scatter can do, but it still is not seen as "one day it will replace..." in terms of its aims, goals, and direction. That would likely be a fairly futile exercise given that the developers of third party tools are companies and development teams dedicated specifically to "software that arranges objects" and they do not also have to develop a render engine :) So they can always push things one step ahead.
11
[C4D] I need help! / Re: Scene parsing time extremely long
« on: 2025-07-15, 12:53:50 »
I'd say best bet is to archive the scene with assets and send it in, via ticket will keep that private to the support team (https://support.chaos.com/requests/new ) as there is clearly something wrong somewhere in that scene.
12
[Max] Daily Builds / Re: Toon + Outline Mtl Playground!
« on: 2025-07-14, 14:43:14 »
Don't forget that for ideas like "halftone" etc. to add (or vote for) the suggestion on the Ideas Portal, https://chaoscorona.ideas.aha.io/ . Also, remember to keep suggestions separate - if you want halftone for Toon AND some other features, please post those as separate ideas, otherwise they can't be tracked (e.g. what if one of your requests is done and live, another is being worked on, and another is not actively in development... if all three suggestions are in one Idea, we can't accurately set a status for it and keep you updated; plus of course other users may be interested in one of those features and want to vote for it, but not in the other two; and so on.
Thanks!
Thanks!
13
[C4D] General Discussion / Re: Camera settings difficult to understand
« on: 2025-07-08, 18:47:03 »
Don't forget to add the Photographic Exposure control in the tone mapping if you want the camera override to have an effect, see https://docs.chaos.com/display/CRC4D/Corona+Camera+Tag
14
[C4D] I need help! / Re: Tri-planar mapping scale has changed v13 using older files created in v12?
« on: 2025-07-08, 14:24:30 »
You're welcome! I did accidentally do the same thing myself a couple of times (using the auto install, and so erasing my other installs), so I learned fast haha! Glad you have it all up and running now :)
15
[C4D] I need help! / Re: Tri-planar mapping scale has changed v13 using older files created in v12?
« on: 2025-07-07, 22:24:13 »
You have to manually unpack and install to preserve different versions.