blurry renders...

[Erich]

When I render an image, it appears very blurry. My Output size is set to 3160 x 2160 and I do not have depth of field on so everything should be very sharp. I checked some previous posts related to this and it was mentioned to ensure that image upscaling was set to 1. I checked and it is set to 1. So I don't know what is causing this. I have experienced this a few times now with different models and it seems to occur somewhat randomly.

Any help would be appreciated. A screenshot showing the render in the IR is attached.

[romullus]

It appears to me that the render in your screenshot is zoomed in beyond 1:1. Make sure that you're always looking at your picture at 100% zoom when you want to evaluate its sharpness.

[Erich]

It appears to me that the render in your screenshot is zoomed in beyond 1:1. Make sure that you're always looking at your picture at 100% zoom when you want to evaluate its sharpness.

Here is a screenshot at 1:1. it still appears blurry to me.

[romullus]

To be honest, this looks pretty normal to me. If you want more sharpness, you can always sharpen the image in Corona VFB, or saving it to the disk and bringing to photoshop or other program for post-processing. Alternatively you can reduce image filter radius in render settings, or turn it off completely, although i don't think it will have significant effect on sharpness.

[3dboomerang]

Render settings > Image Filter > Type: Tent > Width [px]: 1,2 value

cheers

[Erich]

Render settings > Image Filter > Type: Tent > Width [px]: 1,2 value

cheers

Thank you. Mine was set to High Quality instead of Tent. Changing it did seem to make a difference. :)

It took me a while to find this, but in case others have this same issue the Image filter can be found in the System tab of the Render Setup window.

[lupaz]

Are you sure DOF is not on?

[Erich]

Are you sure DOF is not on?

Yes, I am positive.

[Avi]

Hey, did you find the solution? The solution listed above should help you but if you are still having issues, please let me know.

[Erich]

Hey, did you find the solution? The solution listed above should help you but if you are still having issues, please let me know.

Yes, changing the image filter did the trick. Thanks.