1
Hardware / Re: RAMPAGE IV FORMULA or x79 mb and 16gb modules support
« on: 2017-02-04, 19:37:15 »
i7 3930k supports 64gb
but still dont know if mobo handle it.
but still dont know if mobo handle it.
2024-04-20, 01:10:55
News:
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
Hardware / RAMPAGE IV FORMULA or x79 mb and 16gb modules support
« on: 2017-02-04, 13:55:42 »
Hello, I have RAMPAGE IV FORMULA
Official site is telling 32gb ram max capacity support. But when this mobo were coming out there was no 16gb modules on market i think.
Anybody tried this mobo or other x79 mb's with 4 ram slots making 4x16gb configuration?
Official site is telling 32gb ram max capacity support. But when this mobo were coming out there was no 16gb modules on market i think.
Anybody tried this mobo or other x79 mb's with 4 ram slots making 4x16gb configuration?
3
[Max] I need help! / Re: Getting color from current position
« on: 2016-06-02, 22:31:27 »
Thx for replies. So i have to try forest lite version and see if it works. But i like corona scatter much - simple and fast, it would be great if corona team could add such option in scatter:)
4
[Max] I need help! / Getting color from current position
« on: 2016-06-02, 17:23:16 »
Hello,
let's assume that I have mapped plane and instances of box on this plane. Is possible for mapping those boxes in way of getting color from position boxes stand on?
F.e. left box color blue, right box color white, middle one color orange, etc.
If it is posiible, is this also possible in corona scatter?
let's assume that I have mapped plane and instances of box on this plane. Is possible for mapping those boxes in way of getting color from position boxes stand on?
F.e. left box color blue, right box color white, middle one color orange, etc.
If it is posiible, is this also possible in corona scatter?
5
[Scatter] I need help! / Re: How to create map for corona scatter density/scale
« on: 2015-10-06, 11:18:59 »
Thank You for good advice. I found even quicker solution based on your method.
After inseting polygons, select object and run soulburn script/ConvertEdgeToVertexMap.
After inseting polygons, select object and run soulburn script/ConvertEdgeToVertexMap.
6
[Scatter] I need help! / [solved] How to create map for corona scatter density/scale
« on: 2015-10-06, 02:19:42 »
Hello,
I want to create map looking similar to f.e. this one:
This is simple irregular plane, on which i want to create density/scale map for corona proxy. Map must have specyfic black/grey line or gradient around edge of plane. Problem is, width of this line must be f.e. 5cm in real scale. Map above was created using corona radius edge map. It is perfect, cause i can set width i want. Problem is this map doesnt work as density/scale map in proxy, so i cant us it. Is there another way i can create such map? Doing it in PS is in my opinion not good idea, cause how to set 5cm edge gradient on very large area, f.e. 100+m?
I want to create map looking similar to f.e. this one:
This is simple irregular plane, on which i want to create density/scale map for corona proxy. Map must have specyfic black/grey line or gradient around edge of plane. Problem is, width of this line must be f.e. 5cm in real scale. Map above was created using corona radius edge map. It is perfect, cause i can set width i want. Problem is this map doesnt work as density/scale map in proxy, so i cant us it. Is there another way i can create such map? Doing it in PS is in my opinion not good idea, cause how to set 5cm edge gradient on very large area, f.e. 100+m?
7
Hardware / Re: x79 RAMPAGE IV FORMULA 2x8gb + 2x4gb
« on: 2015-08-12, 12:43:47 »
Dont remember, blue screens or errors in aplications. Checked with memtest. One of 4 gives errors. When i want replace one, I must send all 4. So waste of time.
8
Hardware / Re: x79 RAMPAGE IV FORMULA 2x8gb + 2x4gb
« on: 2015-08-11, 12:34:05 »
Thx for reply. I read some time ago there is no difference between 2,3 or quadra channel, but i thought there is difference between single channel and rest. Or I am wrong?:)
9
Hardware / x79 RAMPAGE IV FORMULA 2x8gb + 2x4gb
« on: 2015-08-11, 09:59:09 »
I have https://www.asus.com/ROG-Republic-Of-Gamers/RAMPAGE_IV_FORMULA/specifications/ mobo.
Currently i have 12gb ram 3x4gb. One dimm is broken, before had 16gb. All is running in triple channel.
I am going to buy additional 2x8gb (other type). Can i run 2x4gb + 2x8gb in duall channel or smth on this x79 mobo?
Currently i have 12gb ram 3x4gb. One dimm is broken, before had 16gb. All is running in triple channel.
I am going to buy additional 2x8gb (other type). Can i run 2x4gb + 2x8gb in duall channel or smth on this x79 mobo?
10
[Archive] Corona Scatter 2.0 / Corona Scatter options
« on: 2015-07-26, 10:41:25 »
Hello,
Are you plannig add more options to scatter tool?
I suggest a few:
1. Scatter count per square meter. Now all time when i change size of surface area, i must calculate new count parameter.
2. Something like EDGE option in forest.
3. Avoid collision percentage radius option.
3. Scatter on spline. For example if i want to scatter bushes along path. I think i cant do it now in current scatter tool.
Are you plannig add more options to scatter tool?
I suggest a few:
1. Scatter count per square meter. Now all time when i change size of surface area, i must calculate new count parameter.
2. Something like EDGE option in forest.
3. Avoid collision percentage radius option.
3. Scatter on spline. For example if i want to scatter bushes along path. I think i cant do it now in current scatter tool.
Pages: [1]