31
[Max] I need help! / Re: DR very slow, more update than passes
« on: 2020-09-24, 15:39:34 »
Not block, but I try with and without to test...
2024-04-16, 21:36:30
News:
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
32
[Max] I need help! / Re: DR very slow, more update than passes
« on: 2020-09-24, 13:13:39 »
I also get this when 3ds starts with DR server on the node...
33
[Max] I need help! / Re: DR very slow, more update than passes
« on: 2020-09-24, 12:48:43 »2020/09/24 02:19:21 INF: [07636] [14092] Frame started at: 02:19:21
2020/09/24 02:19:21 INF: [07636] [14092] BEGIN FRAME 0; TASK 1 OF 1; (NO SAVE);
2020/09/24 02:19:21 ERR: [07636] [14092] Render failed
2020/09/24 02:19:21 INF: [07636] [14092] END FRAME 0; TASK 1 OF 1; (NO SAVE); 0.094s; 0 faces; MEM 769 MB;
2020/09/24 02:19:21 ERR: [07636] [14092] Render Error (Render Frame)
This one is that annoying bug introduced in v5 when using dr server for the first time after starting it, usual.2020/09/24 02:19:31 WRN: [07636] [14092] Missing dll: psdmanager.dlv - psdmanagerRELayer
2020/09/24 02:19:31 WRN: [07636] [14092] Missing dll: psdmanager.dlv - psd-manager
2020/09/24 02:19:32 WRN: [07636] [14092] MAXScript FileIn Exception: -- Unknown system exception
2020/09/24 02:19:32 ERR: [07636] [14092] Error executing script
2020/09/24 02:19:34 DBG: [07636] [14092] Stop network
But here might be your problem. I suspect psd-manager is missing and any script maybe related to it throws an error. I'm not familiar with psd-manager but I suspect it has to be installed on all participating nodes which seems not to be the case.
Good Luck
Thanks !
Well, I saw that and installed Vray demo + copied PSDmanager file as told on the cebas website, but doesnt seems to resolve anything....
34
[Max] I need help! / Re: DR very slow, more update than passes
« on: 2020-09-24, 10:34:21 »
For the last hours, same problem :
2020/09/24 02:18:28 DBG: [07636] [14092] Starting network
2020/09/24 02:18:28 INF: [07636] [14092] Application started with secure mode state 'OFF'
2020/09/24 02:18:28 INF: [07636] [14092] Product version: 3ds Max 2020.3 Update (22.3.0.3165)
2020/09/24 02:18:28 DBG: [07636] [14092] ADP Initialize: Done
2020/09/24 02:18:28 INF: [07636] [14092] Data collection and use is 'OFF'. Change your participation anytime in the Help menu of 3ds Max.
2020/09/24 02:18:30 DBG: [07636] [14092] Could not find the specified file in DefaultSettingsParser::parse()
2020/09/24 02:18:39 DBG: [07636] [14092] Graphics driver requested by the user : Nitrous
2020/09/24 02:18:39 DBG: [07636] [14092] Graphics driver actually created in the viewports : null driver
2020/09/24 02:18:44 INF: [07636] [14092] Autodesk 3ds Max Security Tools is active via configuration settings
2020/09/24 02:18:44 INF: [07636] [14092] ALC Security Tool 1.0 loaded. (c:\program files\autodesk\3ds max 2020\applicationplugins\securitytools\contents\scripts\ALC_SecurityTool.ms)
2020/09/24 02:18:44 INF: [07636] [14092] CRP Security Tool 1.0 loaded. (c:\program files\autodesk\3ds max 2020\applicationplugins\securitytools\contents\scripts\CRP_SecurityTool.ms)
2020/09/24 02:18:44 INF: [07636] [14092] ADSL Security Tool 1.0 loaded. (c:\program files\autodesk\3ds max 2020\applicationplugins\securitytools\contents\scripts\ADSL_SecurityTool.ms)
2020/09/24 02:18:52 DBG: [07636] [14092] Starting network
2020/09/24 02:19:08 DBG: [07636] [14092] Calling NetRenderPreLoad
2020/09/24 02:19:08 DBG: [07636] [14092] in NetWorkerPreLoad. jobFile: C:\Users\WS04\AppData\Local\Temp\corona_dr__10856_16604609.xml; jobname: C:\Users\WS04\AppData\Local\CoronaRenderer\DrData\corona_dr.max
2020/09/24 02:19:08 DBG: [07636] [14092] in Init. jobFile: C:\Users\WS04\AppData\Local\Temp\corona_dr__10856_16604609.xml; jobname: C:\Users\WS04\AppData\Local\CoronaRenderer\DrData\corona_dr.max
2020/09/24 02:19:08 DBG: [07636] [14092] in Init. calling nrGetIface. jobToSend: C:\Users\WS04\AppData\Local\CoronaRenderer\DrData\corona_dr.max job:C:\Users\WS04\AppData\Local\Temp\corona_dr__10856_16604609.xml
2020/09/24 02:19:08 DBG: [07636] [14092] in NetWorkerPreLoad. curJobname: C:\Users\WS04\AppData\Local\CoronaRenderer\DrData\corona_dr.max; init: 0
2020/09/24 02:19:08 DBG: [07636] [14092] in NetWorkerPreLoad. calling PostInitMessageSystem()
2020/09/24 02:19:08 DBG: [07636] [14092] in NetWorkerPreLoad. srv_pid: 10856
2020/09/24 02:19:08 DBG: [07636] [14092] leaving NetWorkerPreLoad. LoadLib()
2020/09/24 02:19:08 DBG: [07636] [14092] NetRenderPreLoad passed
2020/09/24 02:19:08 DBG: [07636] [14092] Graphics driver requested by the user : Nitrous
2020/09/24 02:19:08 DBG: [07636] [14092] Graphics driver actually created in the viewports : null driver
2020/09/24 02:19:08 DBG: [07636] [14092] Graphics driver requested by the user : Nitrous
2020/09/24 02:19:08 DBG: [07636] [14092] Graphics driver actually created in the viewports : null driver
2020/09/24 02:19:08 DBG: [07636] [14092] Graphics driver requested by the user : Nitrous
2020/09/24 02:19:08 DBG: [07636] [14092] Graphics driver actually created in the viewports : null driver
2020/09/24 02:19:19 DBG: [07636] [14092] Interface8::LoadFromFile(C:\Users\WS04\AppData\Local\CoronaRenderer\DrData\corona_dr.max)
2020/09/24 02:19:19 INF: [07636] [14092] Starting to load file: C:\Users\WS04\AppData\Local\CoronaRenderer\DrData\corona_dr.max
2020/09/24 02:19:20 INF: [07636] [14092] SYSTEM: Production renderer is changed to Scanline Renderer. Previous messages are cleared.
2020/09/24 02:19:20 INF: [07636] [14092] CORONA: Corona is up and running. Corona version: 6, netrender mode: on, slave mode: on, quiet mode: on, Max gamma (display/input/output): 2.2000000476837158/2.2000000476837158/2.2000000476837158
2020/09/24 02:19:20 INF: [07636] [14092] CORONA : This scene uses legacy (pre-v4) medium/refraction resolving that is not based on geometry normals and produces incorrect results when multiple medium containers are intersecting. The scene was loaded with the legacy behavior to make the rendered result more consistent with older versions of Corona, but we strongly recommend switching to new behavior using the button below. If normals ...
2020/09/24 02:19:20 INF: [07636] [14092] Done loading file: C:\Users\WS04\AppData\Local\CoronaRenderer\DrData\corona_dr.max
2020/09/24 02:19:20 INF: [07636] [14092] SYSTEM: Production renderer is changed to Corona 6. Previous messages are cleared.
2020/09/24 02:19:20 INF: [07636] [14092] Starting network rendering
2020/09/24 02:19:20 INF: [07636] [14092] Max is ready to begin render
2020/09/24 02:19:21 INF: [07636] [14092] Frame 0 assigned
2020/09/24 02:19:21 INF: [07636] [14092] Frame started at: 02:19:21
2020/09/24 02:19:21 INF: [07636] [14092] BEGIN FRAME 0; TASK 1 OF 1; (NO SAVE);
2020/09/24 02:19:21 ERR: [07636] [14092] Render failed
2020/09/24 02:19:21 INF: [07636] [14092] END FRAME 0; TASK 1 OF 1; (NO SAVE); 0.094s; 0 faces; MEM 769 MB;
2020/09/24 02:19:21 ERR: [07636] [14092] Render Error (Render Frame)
2020/09/24 02:19:21 DBG: [07636] [14092] Interface8::LoadFromFile(C:\Users\WS04\AppData\Local\CoronaRenderer\DrData\received_scene_2813093526.max)
2020/09/24 02:19:21 INF: [07636] [14092] Starting to load file: C:\Users\WS04\AppData\Local\CoronaRenderer\DrData\received_scene_2813093526.max
2020/09/24 02:19:31 WRN: [07636] [14092] Missing dll: vraycolor2020.dlt - VRayColor
2020/09/24 02:19:31 WRN: [07636] [14092] Missing dll: vrender2020.dlr - VRayMtl
2020/09/24 02:19:31 WRN: [07636] [14092] Missing dll: vrender2020.dlr - VRayDiffuseFilterMap
2020/09/24 02:19:31 WRN: [07636] [14092] Missing dll: psdmanager.dlv - psdmanagerRELayer
2020/09/24 02:19:31 WRN: [07636] [14092] Missing dll: psdmanager.dlv - psd-manager
2020/09/24 02:19:32 WRN: [07636] [14092] MAXScript FileIn Exception: -- Unknown system exception
2020/09/24 02:19:32 ERR: [07636] [14092] Error executing script
2020/09/24 02:19:34 DBG: [07636] [14092] Stop network
2020/09/24 02:19:42 DBG: [14640] [12700] Starting network
2020/09/24 02:19:42 INF: [14640] [12700] Application started with secure mode state 'OFF'
2020/09/24 02:19:42 INF: [14640] [12700] Product version: 3ds Max 2020.3 Update (22.3.0.3165)
2020/09/24 02:19:42 DBG: [14640] [12700] ADP Initialize: Done
2020/09/24 02:19:42 INF: [14640] [12700] Data collection and use is 'OFF'. Change your participation anytime in the Help menu of 3ds Max.
2020/09/24 02:19:42 DBG: [14640] [12700] Could not find the specified file in DefaultSettingsParser::parse()
2020/09/24 02:19:47 DBG: [14640] [12700] Graphics driver requested by the user : Nitrous
2020/09/24 02:19:47 DBG: [14640] [12700] Graphics driver actually created in the viewports : null driver
2020/09/24 10:36:36 DBG: [07768] [13980] Starting network
2020/09/24 10:36:36 INF: [07768] [13980] Application started with secure mode state 'OFF'
2020/09/24 10:36:36 INF: [07768] [13980] Product version: 3ds Max 2020.3 Update (22.3.0.3165)
2020/09/24 10:36:36 DBG: [07768] [13980] ADP Initialize: Done
2020/09/24 10:36:36 INF: [07768] [13980] Data collection and use is 'OFF'. Change your participation anytime in the Help menu of 3ds Max.
2020/09/24 10:36:37 DBG: [07768] [13980] Could not find the specified file in DefaultSettingsParser::parse()
2020/09/24 10:36:47 DBG: [07768] [13980] Graphics driver requested by the user : Nitrous
2020/09/24 10:36:47 DBG: [07768] [13980] Graphics driver actually created in the viewports : null driver
2020/09/24 10:36:52 INF: [07768] [13980] Autodesk 3ds Max Security Tools is active via configuration settings
2020/09/24 10:36:52 INF: [07768] [13980] ALC Security Tool 1.0 loaded. (c:\program files\autodesk\3ds max 2020\applicationplugins\securitytools\contents\scripts\ALC_SecurityTool.ms)
2020/09/24 10:36:52 INF: [07768] [13980] CRP Security Tool 1.0 loaded. (c:\program files\autodesk\3ds max 2020\applicationplugins\securitytools\contents\scripts\CRP_SecurityTool.ms)
2020/09/24 10:36:52 INF: [07768] [13980] ADSL Security Tool 1.0 loaded. (c:\program files\autodesk\3ds max 2020\applicationplugins\securitytools\contents\scripts\ADSL_SecurityTool.ms)
2020/09/24 10:37:01 DBG: [07768] [13980] Starting network
2020/09/24 10:37:26 DBG: [07768] [13980] Calling NetRenderPreLoad
2020/09/24 10:37:26 DBG: [07768] [13980] in NetWorkerPreLoad. jobFile: C:\Users\WS04\AppData\Local\Temp\corona_dr__12444_46492546.xml; jobname: C:\Users\WS04\AppData\Local\CoronaRenderer\DrData\corona_dr.max
2020/09/24 10:37:26 DBG: [07768] [13980] in Init. jobFile: C:\Users\WS04\AppData\Local\Temp\corona_dr__12444_46492546.xml; jobname: C:\Users\WS04\AppData\Local\CoronaRenderer\DrData\corona_dr.max
2020/09/24 10:37:26 DBG: [07768] [13980] in Init. calling nrGetIface. jobToSend: C:\Users\WS04\AppData\Local\CoronaRenderer\DrData\corona_dr.max job:C:\Users\WS04\AppData\Local\Temp\corona_dr__12444_46492546.xml
2020/09/24 10:37:26 DBG: [07768] [13980] in NetWorkerPreLoad. curJobname: C:\Users\WS04\AppData\Local\CoronaRenderer\DrData\corona_dr.max; init: 0
2020/09/24 10:37:26 DBG: [07768] [13980] in NetWorkerPreLoad. calling PostInitMessageSystem()
2020/09/24 10:37:26 DBG: [07768] [13980] in NetWorkerPreLoad. srv_pid: 12444
2020/09/24 10:37:26 DBG: [07768] [13980] leaving NetWorkerPreLoad. LoadLib()
2020/09/24 10:37:26 DBG: [07768] [13980] NetRenderPreLoad passed
2020/09/24 10:37:26 DBG: [07768] [13980] Graphics driver requested by the user : Nitrous
2020/09/24 10:37:26 DBG: [07768] [13980] Graphics driver actually created in the viewports : null driver
2020/09/24 10:37:26 DBG: [07768] [13980] Graphics driver requested by the user : Nitrous
2020/09/24 10:37:26 DBG: [07768] [13980] Graphics driver actually created in the viewports : null driver
2020/09/24 10:37:26 DBG: [07768] [13980] Graphics driver requested by the user : Nitrous
2020/09/24 10:37:26 DBG: [07768] [13980] Graphics driver actually created in the viewports : null driver
2020/09/24 10:37:37 DBG: [07768] [13980] Interface8::LoadFromFile(C:\Users\WS04\AppData\Local\CoronaRenderer\DrData\corona_dr.max)
2020/09/24 10:37:37 INF: [07768] [13980] Starting to load file: C:\Users\WS04\AppData\Local\CoronaRenderer\DrData\corona_dr.max
2020/09/24 10:37:38 INF: [07768] [13980] SYSTEM: Production renderer is changed to Scanline Renderer. Previous messages are cleared.
2020/09/24 10:37:38 INF: [07768] [13980] CORONA: Corona is up and running. Corona version: 6, netrender mode: on, slave mode: on, quiet mode: on, Max gamma (display/input/output): 2.2000000476837158/2.2000000476837158/2.2000000476837158
2020/09/24 10:37:38 INF: [07768] [13980] CORONA : This scene uses legacy (pre-v4) medium/refraction resolving that is not based on geometry normals and produces incorrect results when multiple medium containers are intersecting. The scene was loaded with the legacy behavior to make the rendered result more consistent with older versions of Corona, but we strongly recommend switching to new behavior using the button below. If normals ...
2020/09/24 10:37:38 INF: [07768] [13980] Done loading file: C:\Users\WS04\AppData\Local\CoronaRenderer\DrData\corona_dr.max
2020/09/24 10:37:38 INF: [07768] [13980] SYSTEM: Production renderer is changed to Corona 6. Previous messages are cleared.
2020/09/24 10:37:38 INF: [07768] [13980] Starting network rendering
2020/09/24 10:37:38 INF: [07768] [13980] Max is ready to begin render
2020/09/24 10:37:39 INF: [07768] [13980] Frame 0 assigned
2020/09/24 10:37:39 INF: [07768] [13980] Frame started at: 10:37:39
2020/09/24 10:37:39 INF: [07768] [13980] BEGIN FRAME 0; TASK 1 OF 1; (NO SAVE);
2020/09/24 10:37:39 ERR: [07768] [13980] Render failed
2020/09/24 10:37:39 INF: [07768] [13980] END FRAME 0; TASK 1 OF 1; (NO SAVE); 0.094s; 0 faces; MEM 780 MB;
2020/09/24 10:37:39 ERR: [07768] [13980] Render Error (Render Frame)
2020/09/24 10:37:40 DBG: [07768] [13980] Interface8::LoadFromFile(C:\Users\WS04\AppData\Local\CoronaRenderer\DrData\received_scene_4021995225.max)
2020/09/24 10:37:40 INF: [07768] [13980] Starting to load file: C:\Users\WS04\AppData\Local\CoronaRenderer\DrData\received_scene_4021995225.max
2020/09/24 10:37:50 WRN: [07768] [13980] Missing dll: vraycolor2020.dlt - VRayColor
2020/09/24 10:37:50 WRN: [07768] [13980] Missing dll: vrender2020.dlr - VRayMtl
2020/09/24 10:37:50 WRN: [07768] [13980] Missing dll: vrender2020.dlr - VRayDiffuseFilterMap
2020/09/24 10:37:50 WRN: [07768] [13980] Missing dll: psdmanager.dlv - psdmanagerRELayer
2020/09/24 10:37:50 WRN: [07768] [13980] Missing dll: psdmanager.dlv - psd-manager
2020/09/24 10:37:50 WRN: [07768] [13980] MAXScript FileIn Exception: -- Unknown system exception
2020/09/24 10:37:50 ERR: [07768] [13980] Error executing script
2020/09/24 10:37:52 DBG: [07768] [13980] Stop network
2020/09/24 10:38:00 DBG: [13716] [09000] Starting network
2020/09/24 10:38:00 INF: [13716] [09000] Application started with secure mode state 'OFF'
2020/09/24 10:38:00 INF: [13716] [09000] Product version: 3ds Max 2020.3 Update (22.3.0.3165)
2020/09/24 10:38:00 DBG: [13716] [09000] ADP Initialize: Done
2020/09/24 10:38:00 INF: [13716] [09000] Data collection and use is 'OFF'. Change your participation anytime in the Help menu of 3ds Max.
2020/09/24 10:38:01 DBG: [13716] [09000] Could not find the specified file in DefaultSettingsParser::parse()
2020/09/24 10:38:06 DBG: [13716] [09000] Graphics driver requested by the user : Nitrous
2020/09/24 10:38:06 DBG: [13716] [09000] Graphics driver actually created in the viewports : null driver
2020/09/24 02:18:28 DBG: [07636] [14092] Starting network
2020/09/24 02:18:28 INF: [07636] [14092] Application started with secure mode state 'OFF'
2020/09/24 02:18:28 INF: [07636] [14092] Product version: 3ds Max 2020.3 Update (22.3.0.3165)
2020/09/24 02:18:28 DBG: [07636] [14092] ADP Initialize: Done
2020/09/24 02:18:28 INF: [07636] [14092] Data collection and use is 'OFF'. Change your participation anytime in the Help menu of 3ds Max.
2020/09/24 02:18:30 DBG: [07636] [14092] Could not find the specified file in DefaultSettingsParser::parse()
2020/09/24 02:18:39 DBG: [07636] [14092] Graphics driver requested by the user : Nitrous
2020/09/24 02:18:39 DBG: [07636] [14092] Graphics driver actually created in the viewports : null driver
2020/09/24 02:18:44 INF: [07636] [14092] Autodesk 3ds Max Security Tools is active via configuration settings
2020/09/24 02:18:44 INF: [07636] [14092] ALC Security Tool 1.0 loaded. (c:\program files\autodesk\3ds max 2020\applicationplugins\securitytools\contents\scripts\ALC_SecurityTool.ms)
2020/09/24 02:18:44 INF: [07636] [14092] CRP Security Tool 1.0 loaded. (c:\program files\autodesk\3ds max 2020\applicationplugins\securitytools\contents\scripts\CRP_SecurityTool.ms)
2020/09/24 02:18:44 INF: [07636] [14092] ADSL Security Tool 1.0 loaded. (c:\program files\autodesk\3ds max 2020\applicationplugins\securitytools\contents\scripts\ADSL_SecurityTool.ms)
2020/09/24 02:18:52 DBG: [07636] [14092] Starting network
2020/09/24 02:19:08 DBG: [07636] [14092] Calling NetRenderPreLoad
2020/09/24 02:19:08 DBG: [07636] [14092] in NetWorkerPreLoad. jobFile: C:\Users\WS04\AppData\Local\Temp\corona_dr__10856_16604609.xml; jobname: C:\Users\WS04\AppData\Local\CoronaRenderer\DrData\corona_dr.max
2020/09/24 02:19:08 DBG: [07636] [14092] in Init. jobFile: C:\Users\WS04\AppData\Local\Temp\corona_dr__10856_16604609.xml; jobname: C:\Users\WS04\AppData\Local\CoronaRenderer\DrData\corona_dr.max
2020/09/24 02:19:08 DBG: [07636] [14092] in Init. calling nrGetIface. jobToSend: C:\Users\WS04\AppData\Local\CoronaRenderer\DrData\corona_dr.max job:C:\Users\WS04\AppData\Local\Temp\corona_dr__10856_16604609.xml
2020/09/24 02:19:08 DBG: [07636] [14092] in NetWorkerPreLoad. curJobname: C:\Users\WS04\AppData\Local\CoronaRenderer\DrData\corona_dr.max; init: 0
2020/09/24 02:19:08 DBG: [07636] [14092] in NetWorkerPreLoad. calling PostInitMessageSystem()
2020/09/24 02:19:08 DBG: [07636] [14092] in NetWorkerPreLoad. srv_pid: 10856
2020/09/24 02:19:08 DBG: [07636] [14092] leaving NetWorkerPreLoad. LoadLib()
2020/09/24 02:19:08 DBG: [07636] [14092] NetRenderPreLoad passed
2020/09/24 02:19:08 DBG: [07636] [14092] Graphics driver requested by the user : Nitrous
2020/09/24 02:19:08 DBG: [07636] [14092] Graphics driver actually created in the viewports : null driver
2020/09/24 02:19:08 DBG: [07636] [14092] Graphics driver requested by the user : Nitrous
2020/09/24 02:19:08 DBG: [07636] [14092] Graphics driver actually created in the viewports : null driver
2020/09/24 02:19:08 DBG: [07636] [14092] Graphics driver requested by the user : Nitrous
2020/09/24 02:19:08 DBG: [07636] [14092] Graphics driver actually created in the viewports : null driver
2020/09/24 02:19:19 DBG: [07636] [14092] Interface8::LoadFromFile(C:\Users\WS04\AppData\Local\CoronaRenderer\DrData\corona_dr.max)
2020/09/24 02:19:19 INF: [07636] [14092] Starting to load file: C:\Users\WS04\AppData\Local\CoronaRenderer\DrData\corona_dr.max
2020/09/24 02:19:20 INF: [07636] [14092] SYSTEM: Production renderer is changed to Scanline Renderer. Previous messages are cleared.
2020/09/24 02:19:20 INF: [07636] [14092] CORONA: Corona is up and running. Corona version: 6, netrender mode: on, slave mode: on, quiet mode: on, Max gamma (display/input/output): 2.2000000476837158/2.2000000476837158/2.2000000476837158
2020/09/24 02:19:20 INF: [07636] [14092] CORONA : This scene uses legacy (pre-v4) medium/refraction resolving that is not based on geometry normals and produces incorrect results when multiple medium containers are intersecting. The scene was loaded with the legacy behavior to make the rendered result more consistent with older versions of Corona, but we strongly recommend switching to new behavior using the button below. If normals ...
2020/09/24 02:19:20 INF: [07636] [14092] Done loading file: C:\Users\WS04\AppData\Local\CoronaRenderer\DrData\corona_dr.max
2020/09/24 02:19:20 INF: [07636] [14092] SYSTEM: Production renderer is changed to Corona 6. Previous messages are cleared.
2020/09/24 02:19:20 INF: [07636] [14092] Starting network rendering
2020/09/24 02:19:20 INF: [07636] [14092] Max is ready to begin render
2020/09/24 02:19:21 INF: [07636] [14092] Frame 0 assigned
2020/09/24 02:19:21 INF: [07636] [14092] Frame started at: 02:19:21
2020/09/24 02:19:21 INF: [07636] [14092] BEGIN FRAME 0; TASK 1 OF 1; (NO SAVE);
2020/09/24 02:19:21 ERR: [07636] [14092] Render failed
2020/09/24 02:19:21 INF: [07636] [14092] END FRAME 0; TASK 1 OF 1; (NO SAVE); 0.094s; 0 faces; MEM 769 MB;
2020/09/24 02:19:21 ERR: [07636] [14092] Render Error (Render Frame)
2020/09/24 02:19:21 DBG: [07636] [14092] Interface8::LoadFromFile(C:\Users\WS04\AppData\Local\CoronaRenderer\DrData\received_scene_2813093526.max)
2020/09/24 02:19:21 INF: [07636] [14092] Starting to load file: C:\Users\WS04\AppData\Local\CoronaRenderer\DrData\received_scene_2813093526.max
2020/09/24 02:19:31 WRN: [07636] [14092] Missing dll: vraycolor2020.dlt - VRayColor
2020/09/24 02:19:31 WRN: [07636] [14092] Missing dll: vrender2020.dlr - VRayMtl
2020/09/24 02:19:31 WRN: [07636] [14092] Missing dll: vrender2020.dlr - VRayDiffuseFilterMap
2020/09/24 02:19:31 WRN: [07636] [14092] Missing dll: psdmanager.dlv - psdmanagerRELayer
2020/09/24 02:19:31 WRN: [07636] [14092] Missing dll: psdmanager.dlv - psd-manager
2020/09/24 02:19:32 WRN: [07636] [14092] MAXScript FileIn Exception: -- Unknown system exception
2020/09/24 02:19:32 ERR: [07636] [14092] Error executing script
2020/09/24 02:19:34 DBG: [07636] [14092] Stop network
2020/09/24 02:19:42 DBG: [14640] [12700] Starting network
2020/09/24 02:19:42 INF: [14640] [12700] Application started with secure mode state 'OFF'
2020/09/24 02:19:42 INF: [14640] [12700] Product version: 3ds Max 2020.3 Update (22.3.0.3165)
2020/09/24 02:19:42 DBG: [14640] [12700] ADP Initialize: Done
2020/09/24 02:19:42 INF: [14640] [12700] Data collection and use is 'OFF'. Change your participation anytime in the Help menu of 3ds Max.
2020/09/24 02:19:42 DBG: [14640] [12700] Could not find the specified file in DefaultSettingsParser::parse()
2020/09/24 02:19:47 DBG: [14640] [12700] Graphics driver requested by the user : Nitrous
2020/09/24 02:19:47 DBG: [14640] [12700] Graphics driver actually created in the viewports : null driver
2020/09/24 10:36:36 DBG: [07768] [13980] Starting network
2020/09/24 10:36:36 INF: [07768] [13980] Application started with secure mode state 'OFF'
2020/09/24 10:36:36 INF: [07768] [13980] Product version: 3ds Max 2020.3 Update (22.3.0.3165)
2020/09/24 10:36:36 DBG: [07768] [13980] ADP Initialize: Done
2020/09/24 10:36:36 INF: [07768] [13980] Data collection and use is 'OFF'. Change your participation anytime in the Help menu of 3ds Max.
2020/09/24 10:36:37 DBG: [07768] [13980] Could not find the specified file in DefaultSettingsParser::parse()
2020/09/24 10:36:47 DBG: [07768] [13980] Graphics driver requested by the user : Nitrous
2020/09/24 10:36:47 DBG: [07768] [13980] Graphics driver actually created in the viewports : null driver
2020/09/24 10:36:52 INF: [07768] [13980] Autodesk 3ds Max Security Tools is active via configuration settings
2020/09/24 10:36:52 INF: [07768] [13980] ALC Security Tool 1.0 loaded. (c:\program files\autodesk\3ds max 2020\applicationplugins\securitytools\contents\scripts\ALC_SecurityTool.ms)
2020/09/24 10:36:52 INF: [07768] [13980] CRP Security Tool 1.0 loaded. (c:\program files\autodesk\3ds max 2020\applicationplugins\securitytools\contents\scripts\CRP_SecurityTool.ms)
2020/09/24 10:36:52 INF: [07768] [13980] ADSL Security Tool 1.0 loaded. (c:\program files\autodesk\3ds max 2020\applicationplugins\securitytools\contents\scripts\ADSL_SecurityTool.ms)
2020/09/24 10:37:01 DBG: [07768] [13980] Starting network
2020/09/24 10:37:26 DBG: [07768] [13980] Calling NetRenderPreLoad
2020/09/24 10:37:26 DBG: [07768] [13980] in NetWorkerPreLoad. jobFile: C:\Users\WS04\AppData\Local\Temp\corona_dr__12444_46492546.xml; jobname: C:\Users\WS04\AppData\Local\CoronaRenderer\DrData\corona_dr.max
2020/09/24 10:37:26 DBG: [07768] [13980] in Init. jobFile: C:\Users\WS04\AppData\Local\Temp\corona_dr__12444_46492546.xml; jobname: C:\Users\WS04\AppData\Local\CoronaRenderer\DrData\corona_dr.max
2020/09/24 10:37:26 DBG: [07768] [13980] in Init. calling nrGetIface. jobToSend: C:\Users\WS04\AppData\Local\CoronaRenderer\DrData\corona_dr.max job:C:\Users\WS04\AppData\Local\Temp\corona_dr__12444_46492546.xml
2020/09/24 10:37:26 DBG: [07768] [13980] in NetWorkerPreLoad. curJobname: C:\Users\WS04\AppData\Local\CoronaRenderer\DrData\corona_dr.max; init: 0
2020/09/24 10:37:26 DBG: [07768] [13980] in NetWorkerPreLoad. calling PostInitMessageSystem()
2020/09/24 10:37:26 DBG: [07768] [13980] in NetWorkerPreLoad. srv_pid: 12444
2020/09/24 10:37:26 DBG: [07768] [13980] leaving NetWorkerPreLoad. LoadLib()
2020/09/24 10:37:26 DBG: [07768] [13980] NetRenderPreLoad passed
2020/09/24 10:37:26 DBG: [07768] [13980] Graphics driver requested by the user : Nitrous
2020/09/24 10:37:26 DBG: [07768] [13980] Graphics driver actually created in the viewports : null driver
2020/09/24 10:37:26 DBG: [07768] [13980] Graphics driver requested by the user : Nitrous
2020/09/24 10:37:26 DBG: [07768] [13980] Graphics driver actually created in the viewports : null driver
2020/09/24 10:37:26 DBG: [07768] [13980] Graphics driver requested by the user : Nitrous
2020/09/24 10:37:26 DBG: [07768] [13980] Graphics driver actually created in the viewports : null driver
2020/09/24 10:37:37 DBG: [07768] [13980] Interface8::LoadFromFile(C:\Users\WS04\AppData\Local\CoronaRenderer\DrData\corona_dr.max)
2020/09/24 10:37:37 INF: [07768] [13980] Starting to load file: C:\Users\WS04\AppData\Local\CoronaRenderer\DrData\corona_dr.max
2020/09/24 10:37:38 INF: [07768] [13980] SYSTEM: Production renderer is changed to Scanline Renderer. Previous messages are cleared.
2020/09/24 10:37:38 INF: [07768] [13980] CORONA: Corona is up and running. Corona version: 6, netrender mode: on, slave mode: on, quiet mode: on, Max gamma (display/input/output): 2.2000000476837158/2.2000000476837158/2.2000000476837158
2020/09/24 10:37:38 INF: [07768] [13980] CORONA : This scene uses legacy (pre-v4) medium/refraction resolving that is not based on geometry normals and produces incorrect results when multiple medium containers are intersecting. The scene was loaded with the legacy behavior to make the rendered result more consistent with older versions of Corona, but we strongly recommend switching to new behavior using the button below. If normals ...
2020/09/24 10:37:38 INF: [07768] [13980] Done loading file: C:\Users\WS04\AppData\Local\CoronaRenderer\DrData\corona_dr.max
2020/09/24 10:37:38 INF: [07768] [13980] SYSTEM: Production renderer is changed to Corona 6. Previous messages are cleared.
2020/09/24 10:37:38 INF: [07768] [13980] Starting network rendering
2020/09/24 10:37:38 INF: [07768] [13980] Max is ready to begin render
2020/09/24 10:37:39 INF: [07768] [13980] Frame 0 assigned
2020/09/24 10:37:39 INF: [07768] [13980] Frame started at: 10:37:39
2020/09/24 10:37:39 INF: [07768] [13980] BEGIN FRAME 0; TASK 1 OF 1; (NO SAVE);
2020/09/24 10:37:39 ERR: [07768] [13980] Render failed
2020/09/24 10:37:39 INF: [07768] [13980] END FRAME 0; TASK 1 OF 1; (NO SAVE); 0.094s; 0 faces; MEM 780 MB;
2020/09/24 10:37:39 ERR: [07768] [13980] Render Error (Render Frame)
2020/09/24 10:37:40 DBG: [07768] [13980] Interface8::LoadFromFile(C:\Users\WS04\AppData\Local\CoronaRenderer\DrData\received_scene_4021995225.max)
2020/09/24 10:37:40 INF: [07768] [13980] Starting to load file: C:\Users\WS04\AppData\Local\CoronaRenderer\DrData\received_scene_4021995225.max
2020/09/24 10:37:50 WRN: [07768] [13980] Missing dll: vraycolor2020.dlt - VRayColor
2020/09/24 10:37:50 WRN: [07768] [13980] Missing dll: vrender2020.dlr - VRayMtl
2020/09/24 10:37:50 WRN: [07768] [13980] Missing dll: vrender2020.dlr - VRayDiffuseFilterMap
2020/09/24 10:37:50 WRN: [07768] [13980] Missing dll: psdmanager.dlv - psdmanagerRELayer
2020/09/24 10:37:50 WRN: [07768] [13980] Missing dll: psdmanager.dlv - psd-manager
2020/09/24 10:37:50 WRN: [07768] [13980] MAXScript FileIn Exception: -- Unknown system exception
2020/09/24 10:37:50 ERR: [07768] [13980] Error executing script
2020/09/24 10:37:52 DBG: [07768] [13980] Stop network
2020/09/24 10:38:00 DBG: [13716] [09000] Starting network
2020/09/24 10:38:00 INF: [13716] [09000] Application started with secure mode state 'OFF'
2020/09/24 10:38:00 INF: [13716] [09000] Product version: 3ds Max 2020.3 Update (22.3.0.3165)
2020/09/24 10:38:00 DBG: [13716] [09000] ADP Initialize: Done
2020/09/24 10:38:00 INF: [13716] [09000] Data collection and use is 'OFF'. Change your participation anytime in the Help menu of 3ds Max.
2020/09/24 10:38:01 DBG: [13716] [09000] Could not find the specified file in DefaultSettingsParser::parse()
2020/09/24 10:38:06 DBG: [13716] [09000] Graphics driver requested by the user : Nitrous
2020/09/24 10:38:06 DBG: [13716] [09000] Graphics driver actually created in the viewports : null driver
35
[Max] I need help! / Re: DR very slow, more update than passes
« on: 2020-09-24, 10:03:21 »
No, only to the DRlog... cf copy in the 3rd post
36
[Max] I need help! / Re: DR very slow, more update than passes
« on: 2020-09-23, 23:04:48 »
I tryed everything told in help desk for "Closed Loopback Connection"....
In the VFB I'm still getting "Connexion failed" then "Cannot send message" then it turns red and start over to "downloading scene", "parsing" ...
On W10 on both workstations, all is good and detected, ping ok, licence ok, I can access to shared folders....
I'm missing smthg...
In the VFB I'm still getting "Connexion failed" then "Cannot send message" then it turns red and start over to "downloading scene", "parsing" ...
On W10 on both workstations, all is good and detected, ping ok, licence ok, I can access to shared folders....
I'm missing smthg...
37
[Max] I need help! / Re: DR very slow, more update than passes
« on: 2020-09-23, 18:23:31 »
Hey !
I will try without Pulze sure !
After reinstalling evrything, DR still dont begin and DRlog give me this :
020-09-23 17:47:55 DR server started
2020-09-23 17:47:55 Binded to localhost
2020-09-23 17:47:55 Binding UDP socket to local address 192.168.5.100
2020-09-23 17:47:55 Running Corona DrServer build Aug 31 2020 on TCP/UDP ports 19666, loopback TCP/UDP19667
2020-09-23 17:47:55 Available 3dsmax versions:
2020-09-23 17:47:55 2020: C:/Program Files/Autodesk/3ds Max 2020/
2020-09-23 17:47:55 Running command:
"C:\Program Files\Autodesk\3ds Max 2020\3dsmaxcmd.exe" "C:\Users\WS04\AppData\Local\CoronaRenderer\DrData\corona_dr.max" -continueOnError -gammaCorrection:1 -rfw:1 -sf -v:5 -postRenderScript:"C:\Users\WS04\AppData\Local\CoronaRenderer\DrData\post.ms"
2020-09-23 17:47:56 Started loopback connection with 3ds max
2020-09-23 17:47:57 Cannot contact 3ds Max, trying again ...
2020-09-23 17:47:57 3dsMax started successfully
2020-09-23 17:47:58 Accepted remote connection from 192.168.5.90
2020-09-23 17:47:58 Started connection #1
2020-09-23 17:47:58 Handshake: <root><DataType>0</DataType><Handshake>init</Handshake><FrameName>0</FrameName><HostVersion>Max2020</HostVersion><CameraName>PDV bas</CameraName><Region>0 0 0 0</Region><ImageSize>2500 1875</ImageSize><MD5>1125db10ad05e07eb35a5232455234da</MD5><CoreVersion>6</CoreVersion><IpAddress>192.168.5.90</IpAddress></root>
2020-09-23 17:47:58 Saving incoming scene to C:/Users/WS04/AppData/Local/CoronaRenderer/DrData/received_scene_4132660861.max
2020-09-23 17:47:59 Downloaded scene: 103 M bytes in 0 s
2020-09-23 17:47:59 Render for connection #1 started
2020-09-23 17:48:00 Received sampling focus mask (region 0 0 2500 1875)
2020-09-23 17:48:50 Closing loopback manager
2020-09-23 17:48:50 DR is finished
2020-09-23 17:48:50 Ready for new connection
2020-09-23 17:48:50 Running command:
"C:\Program Files\Autodesk\3ds Max 2020\3dsmaxcmd.exe" "C:\Users\WS04\AppData\Local\CoronaRenderer\DrData\corona_dr.max" -continueOnError -gammaCorrection:1 -rfw:1 -sf -v:5 -postRenderScript:"C:\Users\WS04\AppData\Local\CoronaRenderer\DrData\post.ms"
2020-09-23 17:48:52 Started loopback connection with 3ds max
2020-09-23 17:48:53 Cannot contact 3ds Max, trying again ...
2020-09-23 17:48:53 3dsMax started successfully
2020-09-23 17:48:53 Accepted remote connection from 192.168.5.90
2020-09-23 17:48:53 Started connection #2
2020-09-23 17:48:53 Handshake: <root><DataType>0</DataType><Handshake>init</Handshake><FrameName>0</FrameName><HostVersion>Max2020</HostVersion><CameraName>PDV bas</CameraName><Region>0 0 0 0</Region><ImageSize>2500 1875</ImageSize><MD5>1125db10ad05e07eb35a5232455234da</MD5><CoreVersion>6</CoreVersion><IpAddress>192.168.5.90</IpAddress></root>
2020-09-23 17:48:53 Saving incoming scene to C:/Users/WS04/AppData/Local/CoronaRenderer/DrData/received_scene_1643554016.max
2020-09-23 17:48:54 Downloaded scene: 103 M bytes in 0 s
2020-09-23 17:48:55 Received sampling focus mask (region 0 0 2500 1875)
2020-09-23 17:48:55 Render for connection #2 started
2020-09-23 17:49:46 Closing loopback manager
2020-09-23 17:51:40 DR is finished
2020-09-23 17:51:40 Ready for new connection
2020-09-23 17:51:40 Running command:
"C:\Program Files\Autodesk\3ds Max 2020\3dsmaxcmd.exe" "C:\Users\WS04\AppData\Local\CoronaRenderer\DrData\corona_dr.max" -continueOnError -gammaCorrection:1 -rfw:1 -sf -v:5 -postRenderScript:"C:\Users\WS04\AppData\Local\CoronaRenderer\DrData\post.ms"
2020-09-23 17:51:42 Started loopback connection with 3ds max
2020-09-23 17:51:43 Cannot contact 3ds Max, trying again ...
2020-09-23 17:51:43 3dsMax started successfully
2020-09-23 18:22:22 Replying to discovery ping from 192.168.5.90
2020-09-23 18:23:00 Accepted remote connection from 192.168.5.90
2020-09-23 18:23:00 Started connection #3
2020-09-23 18:23:00 Handshake: <root><DataType>0</DataType><Handshake>init</Handshake><FrameName>0</FrameName><HostVersion>Max2020</HostVersion><CameraName>PDV bas</CameraName><Region>0 0 0 0</Region><ImageSize>2500 1875</ImageSize><MD5>525033e30a177fa4d97790a60d71737c</MD5><CoreVersion>6</CoreVersion><IpAddress>192.168.5.90</IpAddress></root>
2020-09-23 18:23:00 Saving incoming scene to C:/Users/WS04/AppData/Local/CoronaRenderer/DrData/received_scene_1223492519.max
2020-09-23 18:23:00 Downloaded scene: 103 M bytes in 0 s
2020-09-23 18:23:01 Render for connection #3 started
2020-09-23 18:23:09 Closing loopback manager
2020-09-23 18:23:10 DR is finished
2020-09-23 18:23:10 Ready for new connection
2020-09-23 18:23:10 Running command:
"C:\Program Files\Autodesk\3ds Max 2020\3dsmaxcmd.exe" "C:\Users\WS04\AppData\Local\CoronaRenderer\DrData\corona_dr.max" -continueOnError -gammaCorrection:1 -rfw:1 -sf -v:5 -postRenderScript:"C:\Users\WS04\AppData\Local\CoronaRenderer\DrData\post.ms"
2020-09-23 18:23:12 Started loopback connection with 3ds max
2020-09-23 18:23:13 Cannot contact 3ds Max, trying again ...
2020-09-23 18:23:13 3dsMax started successfully
2020-09-23 18:23:13 Accepted remote connection from 192.168.5.90
2020-09-23 18:23:13 Started connection #4
2020-09-23 18:23:13 Handshake: <root><DataType>0</DataType><Handshake>init</Handshake><FrameName>0</FrameName><HostVersion>Max2020</HostVersion><CameraName>PDV bas</CameraName><Region>0 0 0 0</Region><ImageSize>2500 1875</ImageSize><MD5>525033e30a177fa4d97790a60d71737c</MD5><CoreVersion>6</CoreVersion><IpAddress>192.168.5.90</IpAddress></root>
2020-09-23 18:23:13 Saving incoming scene to C:/Users/WS04/AppData/Local/CoronaRenderer/DrData/received_scene_2888573702.max
2020-09-23 18:23:14 Downloaded scene: 103 M bytes in 0 s
2020-09-23 18:23:15 Render for connection #4 started
2020-09-23 18:23:37 Received sampling focus mask (region 0 0 2500 1875)
2020-09-23 18:24:06 Closing loopback manager
2020-09-23 18:24:06 DR is finished
2020-09-23 18:24:06 Ready for new connection
2020-09-23 18:24:06 Running command:
"C:\Program Files\Autodesk\3ds Max 2020\3dsmaxcmd.exe" "C:\Users\WS04\AppData\Local\CoronaRenderer\DrData\corona_dr.max" -continueOnError -gammaCorrection:1 -rfw:1 -sf -v:5 -postRenderScript:"C:\Users\WS04\AppData\Local\CoronaRenderer\DrData\post.ms"
2020-09-23 18:24:08 Started loopback connection with 3ds max
2020-09-23 18:24:09 Cannot contact 3ds Max, trying again ...
2020-09-23 18:24:09 3dsMax started successfully
2020-09-23 18:24:09 Accepted remote connection from 192.168.5.90
2020-09-23 18:24:09 Started connection #5
2020-09-23 18:24:09 Handshake: <root><DataType>0</DataType><Handshake>init</Handshake><FrameName>0</FrameName><HostVersion>Max2020</HostVersion><CameraName>PDV bas</CameraName><Region>0 0 0 0</Region><ImageSize>2500 1875</ImageSize><MD5>525033e30a177fa4d97790a60d71737c</MD5><CoreVersion>6</CoreVersion><IpAddress>192.168.5.90</IpAddress></root>
2020-09-23 18:24:09 Saving incoming scene to C:/Users/WS04/AppData/Local/CoronaRenderer/DrData/received_scene_2437811417.max
2020-09-23 18:24:10 Downloaded scene: 103 M bytes in 0 s
2020-09-23 18:24:11 Render for connection #5 started
2020-09-23 18:24:11 Received sampling focus mask (region 0 0 2500 1875)
2020-09-23 18:25:13 Closing loopback manager
2020-09-23 18:25:13 DR is finished
2020-09-23 18:25:13 Ready for new connection
2020-09-23 18:25:13 Running command:
"C:\Program Files\Autodesk\3ds Max 2020\3dsmaxcmd.exe" "C:\Users\WS04\AppData\Local\CoronaRenderer\DrData\corona_dr.max" -continueOnError -gammaCorrection:1 -rfw:1 -sf -v:5 -postRenderScript:"C:\Users\WS04\AppData\Local\CoronaRenderer\DrData\post.ms"
2020-09-23 18:25:15 Started loopback connection with 3ds max
2020-09-23 18:25:16 Cannot contact 3ds Max, trying again ...
2020-09-23 18:25:16 3dsMax started successfully
2020-09-23 18:25:16 Accepted remote connection from 192.168.5.90
2020-09-23 18:25:16 Started connection #6
2020-09-23 18:25:16 Handshake: <root><DataType>0</DataType><Handshake>init</Handshake><FrameName>0</FrameName><HostVersion>Max2020</HostVersion><CameraName>PDV bas</CameraName><Region>0 0 0 0</Region><ImageSize>2500 1875</ImageSize><MD5>525033e30a177fa4d97790a60d71737c</MD5><CoreVersion>6</CoreVersion><IpAddress>192.168.5.90</IpAddress></root>
2020-09-23 18:25:16 Saving incoming scene to C:/Users/WS04/AppData/Local/CoronaRenderer/DrData/received_scene_2628383657.max
2020-09-23 18:25:17 Downloaded scene: 103 M bytes in 0 s
2020-09-23 18:25:18 Received sampling focus mask (region 0 0 2500 1875)
2020-09-23 18:25:18 Render for connection #6 started
I think there is a pb with the render region activated in Pulze, but I cant get ride of it even when no region is selected in VFB...
I will try without Pulze sure !
After reinstalling evrything, DR still dont begin and DRlog give me this :
020-09-23 17:47:55 DR server started
2020-09-23 17:47:55 Binded to localhost
2020-09-23 17:47:55 Binding UDP socket to local address 192.168.5.100
2020-09-23 17:47:55 Running Corona DrServer build Aug 31 2020 on TCP/UDP ports 19666, loopback TCP/UDP19667
2020-09-23 17:47:55 Available 3dsmax versions:
2020-09-23 17:47:55 2020: C:/Program Files/Autodesk/3ds Max 2020/
2020-09-23 17:47:55 Running command:
"C:\Program Files\Autodesk\3ds Max 2020\3dsmaxcmd.exe" "C:\Users\WS04\AppData\Local\CoronaRenderer\DrData\corona_dr.max" -continueOnError -gammaCorrection:1 -rfw:1 -sf -v:5 -postRenderScript:"C:\Users\WS04\AppData\Local\CoronaRenderer\DrData\post.ms"
2020-09-23 17:47:56 Started loopback connection with 3ds max
2020-09-23 17:47:57 Cannot contact 3ds Max, trying again ...
2020-09-23 17:47:57 3dsMax started successfully
2020-09-23 17:47:58 Accepted remote connection from 192.168.5.90
2020-09-23 17:47:58 Started connection #1
2020-09-23 17:47:58 Handshake: <root><DataType>0</DataType><Handshake>init</Handshake><FrameName>0</FrameName><HostVersion>Max2020</HostVersion><CameraName>PDV bas</CameraName><Region>0 0 0 0</Region><ImageSize>2500 1875</ImageSize><MD5>1125db10ad05e07eb35a5232455234da</MD5><CoreVersion>6</CoreVersion><IpAddress>192.168.5.90</IpAddress></root>
2020-09-23 17:47:58 Saving incoming scene to C:/Users/WS04/AppData/Local/CoronaRenderer/DrData/received_scene_4132660861.max
2020-09-23 17:47:59 Downloaded scene: 103 M bytes in 0 s
2020-09-23 17:47:59 Render for connection #1 started
2020-09-23 17:48:00 Received sampling focus mask (region 0 0 2500 1875)
2020-09-23 17:48:50 Closing loopback manager
2020-09-23 17:48:50 DR is finished
2020-09-23 17:48:50 Ready for new connection
2020-09-23 17:48:50 Running command:
"C:\Program Files\Autodesk\3ds Max 2020\3dsmaxcmd.exe" "C:\Users\WS04\AppData\Local\CoronaRenderer\DrData\corona_dr.max" -continueOnError -gammaCorrection:1 -rfw:1 -sf -v:5 -postRenderScript:"C:\Users\WS04\AppData\Local\CoronaRenderer\DrData\post.ms"
2020-09-23 17:48:52 Started loopback connection with 3ds max
2020-09-23 17:48:53 Cannot contact 3ds Max, trying again ...
2020-09-23 17:48:53 3dsMax started successfully
2020-09-23 17:48:53 Accepted remote connection from 192.168.5.90
2020-09-23 17:48:53 Started connection #2
2020-09-23 17:48:53 Handshake: <root><DataType>0</DataType><Handshake>init</Handshake><FrameName>0</FrameName><HostVersion>Max2020</HostVersion><CameraName>PDV bas</CameraName><Region>0 0 0 0</Region><ImageSize>2500 1875</ImageSize><MD5>1125db10ad05e07eb35a5232455234da</MD5><CoreVersion>6</CoreVersion><IpAddress>192.168.5.90</IpAddress></root>
2020-09-23 17:48:53 Saving incoming scene to C:/Users/WS04/AppData/Local/CoronaRenderer/DrData/received_scene_1643554016.max
2020-09-23 17:48:54 Downloaded scene: 103 M bytes in 0 s
2020-09-23 17:48:55 Received sampling focus mask (region 0 0 2500 1875)
2020-09-23 17:48:55 Render for connection #2 started
2020-09-23 17:49:46 Closing loopback manager
2020-09-23 17:51:40 DR is finished
2020-09-23 17:51:40 Ready for new connection
2020-09-23 17:51:40 Running command:
"C:\Program Files\Autodesk\3ds Max 2020\3dsmaxcmd.exe" "C:\Users\WS04\AppData\Local\CoronaRenderer\DrData\corona_dr.max" -continueOnError -gammaCorrection:1 -rfw:1 -sf -v:5 -postRenderScript:"C:\Users\WS04\AppData\Local\CoronaRenderer\DrData\post.ms"
2020-09-23 17:51:42 Started loopback connection with 3ds max
2020-09-23 17:51:43 Cannot contact 3ds Max, trying again ...
2020-09-23 17:51:43 3dsMax started successfully
2020-09-23 18:22:22 Replying to discovery ping from 192.168.5.90
2020-09-23 18:23:00 Accepted remote connection from 192.168.5.90
2020-09-23 18:23:00 Started connection #3
2020-09-23 18:23:00 Handshake: <root><DataType>0</DataType><Handshake>init</Handshake><FrameName>0</FrameName><HostVersion>Max2020</HostVersion><CameraName>PDV bas</CameraName><Region>0 0 0 0</Region><ImageSize>2500 1875</ImageSize><MD5>525033e30a177fa4d97790a60d71737c</MD5><CoreVersion>6</CoreVersion><IpAddress>192.168.5.90</IpAddress></root>
2020-09-23 18:23:00 Saving incoming scene to C:/Users/WS04/AppData/Local/CoronaRenderer/DrData/received_scene_1223492519.max
2020-09-23 18:23:00 Downloaded scene: 103 M bytes in 0 s
2020-09-23 18:23:01 Render for connection #3 started
2020-09-23 18:23:09 Closing loopback manager
2020-09-23 18:23:10 DR is finished
2020-09-23 18:23:10 Ready for new connection
2020-09-23 18:23:10 Running command:
"C:\Program Files\Autodesk\3ds Max 2020\3dsmaxcmd.exe" "C:\Users\WS04\AppData\Local\CoronaRenderer\DrData\corona_dr.max" -continueOnError -gammaCorrection:1 -rfw:1 -sf -v:5 -postRenderScript:"C:\Users\WS04\AppData\Local\CoronaRenderer\DrData\post.ms"
2020-09-23 18:23:12 Started loopback connection with 3ds max
2020-09-23 18:23:13 Cannot contact 3ds Max, trying again ...
2020-09-23 18:23:13 3dsMax started successfully
2020-09-23 18:23:13 Accepted remote connection from 192.168.5.90
2020-09-23 18:23:13 Started connection #4
2020-09-23 18:23:13 Handshake: <root><DataType>0</DataType><Handshake>init</Handshake><FrameName>0</FrameName><HostVersion>Max2020</HostVersion><CameraName>PDV bas</CameraName><Region>0 0 0 0</Region><ImageSize>2500 1875</ImageSize><MD5>525033e30a177fa4d97790a60d71737c</MD5><CoreVersion>6</CoreVersion><IpAddress>192.168.5.90</IpAddress></root>
2020-09-23 18:23:13 Saving incoming scene to C:/Users/WS04/AppData/Local/CoronaRenderer/DrData/received_scene_2888573702.max
2020-09-23 18:23:14 Downloaded scene: 103 M bytes in 0 s
2020-09-23 18:23:15 Render for connection #4 started
2020-09-23 18:23:37 Received sampling focus mask (region 0 0 2500 1875)
2020-09-23 18:24:06 Closing loopback manager
2020-09-23 18:24:06 DR is finished
2020-09-23 18:24:06 Ready for new connection
2020-09-23 18:24:06 Running command:
"C:\Program Files\Autodesk\3ds Max 2020\3dsmaxcmd.exe" "C:\Users\WS04\AppData\Local\CoronaRenderer\DrData\corona_dr.max" -continueOnError -gammaCorrection:1 -rfw:1 -sf -v:5 -postRenderScript:"C:\Users\WS04\AppData\Local\CoronaRenderer\DrData\post.ms"
2020-09-23 18:24:08 Started loopback connection with 3ds max
2020-09-23 18:24:09 Cannot contact 3ds Max, trying again ...
2020-09-23 18:24:09 3dsMax started successfully
2020-09-23 18:24:09 Accepted remote connection from 192.168.5.90
2020-09-23 18:24:09 Started connection #5
2020-09-23 18:24:09 Handshake: <root><DataType>0</DataType><Handshake>init</Handshake><FrameName>0</FrameName><HostVersion>Max2020</HostVersion><CameraName>PDV bas</CameraName><Region>0 0 0 0</Region><ImageSize>2500 1875</ImageSize><MD5>525033e30a177fa4d97790a60d71737c</MD5><CoreVersion>6</CoreVersion><IpAddress>192.168.5.90</IpAddress></root>
2020-09-23 18:24:09 Saving incoming scene to C:/Users/WS04/AppData/Local/CoronaRenderer/DrData/received_scene_2437811417.max
2020-09-23 18:24:10 Downloaded scene: 103 M bytes in 0 s
2020-09-23 18:24:11 Render for connection #5 started
2020-09-23 18:24:11 Received sampling focus mask (region 0 0 2500 1875)
2020-09-23 18:25:13 Closing loopback manager
2020-09-23 18:25:13 DR is finished
2020-09-23 18:25:13 Ready for new connection
2020-09-23 18:25:13 Running command:
"C:\Program Files\Autodesk\3ds Max 2020\3dsmaxcmd.exe" "C:\Users\WS04\AppData\Local\CoronaRenderer\DrData\corona_dr.max" -continueOnError -gammaCorrection:1 -rfw:1 -sf -v:5 -postRenderScript:"C:\Users\WS04\AppData\Local\CoronaRenderer\DrData\post.ms"
2020-09-23 18:25:15 Started loopback connection with 3ds max
2020-09-23 18:25:16 Cannot contact 3ds Max, trying again ...
2020-09-23 18:25:16 3dsMax started successfully
2020-09-23 18:25:16 Accepted remote connection from 192.168.5.90
2020-09-23 18:25:16 Started connection #6
2020-09-23 18:25:16 Handshake: <root><DataType>0</DataType><Handshake>init</Handshake><FrameName>0</FrameName><HostVersion>Max2020</HostVersion><CameraName>PDV bas</CameraName><Region>0 0 0 0</Region><ImageSize>2500 1875</ImageSize><MD5>525033e30a177fa4d97790a60d71737c</MD5><CoreVersion>6</CoreVersion><IpAddress>192.168.5.90</IpAddress></root>
2020-09-23 18:25:16 Saving incoming scene to C:/Users/WS04/AppData/Local/CoronaRenderer/DrData/received_scene_2628383657.max
2020-09-23 18:25:17 Downloaded scene: 103 M bytes in 0 s
2020-09-23 18:25:18 Received sampling focus mask (region 0 0 2500 1875)
2020-09-23 18:25:18 Render for connection #6 started
I think there is a pb with the render region activated in Pulze, but I cant get ride of it even when no region is selected in VFB...
38
[Max] I need help! / DR very slow, more update than passes
« on: 2020-09-23, 10:29:12 »
Hi,
i'm facing a problem while setting a new node for DR.
It seems to work fine, but is very slow.
My workstation 01 is a AMD TR 2990wx @ 4ghz
The new workstation 02 is a dual xeon ES 2698v4 @ 2ghz
While rendering, 01 makes 11 passes when 02 update 25 time and render 2 passes.
I use Pulze SM to manage this.
Usage on 02 is 95% cpu, 50% RAM...
All connected with a modem router.
Also, as you can see the name of 02 is pretty weird, I didnt put that...! Can't change it, it keeps changing back.
Any idea ? Thx !
i'm facing a problem while setting a new node for DR.
It seems to work fine, but is very slow.
My workstation 01 is a AMD TR 2990wx @ 4ghz
The new workstation 02 is a dual xeon ES 2698v4 @ 2ghz
While rendering, 01 makes 11 passes when 02 update 25 time and render 2 passes.
I use Pulze SM to manage this.
Usage on 02 is 95% cpu, 50% RAM...
All connected with a modem router.
Also, as you can see the name of 02 is pretty weird, I didnt put that...! Can't change it, it keeps changing back.
Any idea ? Thx !
39
[Max] Resolved Bugs / Re: Optix & DLL bugs
« on: 2020-05-26, 15:06:28 »
Hello,
it happens again while interactive rendering, cf screenshot.
Also, my viewport is getting full white, need to restart max and my screen stoped full black before.
I'm on max 2020, RTX 2070 super, all up to date drivers from yesterday (driver booster).
I've a USB-c screen attached.
it happens again while interactive rendering, cf screenshot.
Also, my viewport is getting full white, need to restart max and my screen stoped full black before.
I'm on max 2020, RTX 2070 super, all up to date drivers from yesterday (driver booster).
I've a USB-c screen attached.
41
[Max] Feature Requests / Re: Corona Tiles
« on: 2020-05-25, 21:31:39 »
Hello ! Reviving again ! :D
42
[Max] Feature Requests / Re: Interactive VFB Resolution size
« on: 2020-04-25, 19:08:51 »
I use it very often it works perfectly : just click the "+" button in the top left corner of you viewport, and tick the last option '2d Pan Zoom Mode", then zomm in & out to check your scene.
43
[Max] Feature Requests / Corona Proxy Exporter
« on: 2020-04-22, 16:27:57 »
Hello,
instead of opening an old topic, I prefer to create this new one... about an old subject !
The Proxy exporter feels old now in Corona 5...
It's still missing, imo, handy options to accelerate/automate the workflow :
- an auto rename for existing file : you already said you don't like chaotic renaming but it will be very useful. Mainly because it's hard to get through the names of external library and correcting the "laziness" of some modelers not naming correctly their objects (we all do ^^), and this lead us to replacing a Line 09 by another. And doing this for dozen hundreds of items can be at the opposite of corona philosophy : simplification. I found a way to avoid this by exporting proxies into a client specific folder, avoiding to mix projects together, but it also happens anyway.
- a recently used/favorite/current folder menu to save the proxies : a script, Batchloader http://www.scriptspot.com/3ds-max/scripts/batch-loader found a nice way to handle it, with a rolling menu (and an auto rename option). We could also add folders as the RelinkBitmaps Script http://www.scriptspot.com/3ds-max/scripts/relink-bitmaps does, into a list.
- a proxies manipulation menu to set selected/all proxies of a scene, as the script Corona Proxies Tool from Nicolas Caplat does : https://forum.corona-renderer.com/index.php?topic=20251.15
- a convert & get bitmaps options to convert recently merge items (may be in Vray as often) and check/get the right paths (cf RelinkBitmap), while exporting (same way as Corona converter).
What do you think ? Instead of using 4-6 scripts/windows, just using a single native one.
Anyway, i'm still in love with Corona, whatever you decide. But this will, imo, help a lot and avoid boring and redundant manipulation ! :)
Regards,
Jules
instead of opening an old topic, I prefer to create this new one... about an old subject !
The Proxy exporter feels old now in Corona 5...
It's still missing, imo, handy options to accelerate/automate the workflow :
- an auto rename for existing file : you already said you don't like chaotic renaming but it will be very useful. Mainly because it's hard to get through the names of external library and correcting the "laziness" of some modelers not naming correctly their objects (we all do ^^), and this lead us to replacing a Line 09 by another. And doing this for dozen hundreds of items can be at the opposite of corona philosophy : simplification. I found a way to avoid this by exporting proxies into a client specific folder, avoiding to mix projects together, but it also happens anyway.
- a recently used/favorite/current folder menu to save the proxies : a script, Batchloader http://www.scriptspot.com/3ds-max/scripts/batch-loader found a nice way to handle it, with a rolling menu (and an auto rename option). We could also add folders as the RelinkBitmaps Script http://www.scriptspot.com/3ds-max/scripts/relink-bitmaps does, into a list.
- a proxies manipulation menu to set selected/all proxies of a scene, as the script Corona Proxies Tool from Nicolas Caplat does : https://forum.corona-renderer.com/index.php?topic=20251.15
- a convert & get bitmaps options to convert recently merge items (may be in Vray as often) and check/get the right paths (cf RelinkBitmap), while exporting (same way as Corona converter).
What do you think ? Instead of using 4-6 scripts/windows, just using a single native one.
Anyway, i'm still in love with Corona, whatever you decide. But this will, imo, help a lot and avoid boring and redundant manipulation ! :)
Regards,
Jules
44
[Max] Resolved Bugs / Re: Optix & DLL bugs
« on: 2020-04-22, 16:09:28 »
Well, I didnt get this kind of trouble on my 1080, so with a 2070 it seems unlikely, isnt it ?
But I noticed that working is unstabler on my AMD TR (+2070 super 8Gb) workstation than on the dual xeon (+ 1080).
Ok, I get it for the minidump file.
It's seems to be only on IR yes, as also i use Corona High Q denoiser for normal rendering.
But I noticed that working is unstabler on my AMD TR (+2070 super 8Gb) workstation than on the dual xeon (+ 1080).
Ok, I get it for the minidump file.
It's seems to be only on IR yes, as also i use Corona High Q denoiser for normal rendering.
45
[Max] Resolved Bugs / Re: Optix & DLL bugs
« on: 2020-04-22, 13:57:58 »
Yet it happens in Region yes, but mainly in Interactive Rendering.
Even more when having a youtube video running aside, but I dont remember it when having a VLC video running.
It's Corona region from VFB.
I will try to get a minidump next time, but it didnt even displayed a 3ds Max Error Report last time. Anyway I can get the dump file into the temp folder ?
Even more when having a youtube video running aside, but I dont remember it when having a VLC video running.
It's Corona region from VFB.
I will try to get a minidump next time, but it didnt even displayed a 3ds Max Error Report last time. Anyway I can get the dump file into the temp folder ?