1
[C4D] General Discussion / Re: Help! issue with the liveview
« on: 2023-03-28, 09:40:08 »
Also, switch from Gouraud Shading to Quick Shading.
2025-04-20, 02:47:05
News:
Exciting News: Chaos acquires EvolveLAB = AI-Powered Design. To learn more, please visit this page!
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
[C4D] General Discussion / Re: Affordable Render Farm Services
« on: 2023-03-14, 22:19:51 »
Im using Rebus for animations and for large-resolution stills. It does have its quirks but is unmatched in ease of use.
A while back I went on a mission to find something better, tried a whole bunch of farms, and the others were a huge pain in the ass to work with.
For animations there's a built-in estimator, you send the job, it renders 3 frames and gives you an estimate on the whole job and it's fairly accurate if you don't have dramatic changes in lighting during the shot.
It's far from perfect, but I've probably spent 10k+ over the last few years on Rebus and the experience hasn't been perfect but it's mainly OK. There's almost always someone to reply to chat support requests.
You should have some free points with your corona subscription, it's probably worth a try.
A while back I went on a mission to find something better, tried a whole bunch of farms, and the others were a huge pain in the ass to work with.
For animations there's a built-in estimator, you send the job, it renders 3 frames and gives you an estimate on the whole job and it's fairly accurate if you don't have dramatic changes in lighting during the shot.
It's far from perfect, but I've probably spent 10k+ over the last few years on Rebus and the experience hasn't been perfect but it's mainly OK. There's almost always someone to reply to chat support requests.
You should have some free points with your corona subscription, it's probably worth a try.
3
[C4D] I need help! / Re: memory consumption window
« on: 2022-10-27, 23:21:31 »
You can have the renderstamp as a multi pass layer. I've used it like this to get more accurate numbers of how the render farm nodes compare to my PC.
4
[C4D] I need help! / Re: How to see the progress on render queue for still images
« on: 2022-08-16, 12:38:02 »
I open the console window and see the progress there,
you'll see something like
2022/08/16 12:35:10 [Corona4D] Pass 1/30
If you have it set to number of passes, you'll see where it's at. I'm not sure what it outputs if set to noise level or time.
you'll see something like
2022/08/16 12:35:10 [Corona4D] Pass 1/30
If you have it set to number of passes, you'll see where it's at. I'm not sure what it outputs if set to noise level or time.
5
[C4D] General Discussion / Re: Copying multipass into a new scene?
« on: 2022-06-29, 19:10:54 »
You can make a new new.c4d scene with the passes set up, I did this with the passes and masks I use in pretty much all my scenes.
Or make a blank scene with the passes needed, and then merge scenes.
Or make a blank scene with the passes needed, and then merge scenes.
6
[C4D] I need help! / Re: Bump texture rendering too smooth
« on: 2022-06-29, 10:20:42 »
You can also try reducing the Delta value in the noise. For high-frequency noise bumps, a Delta value at the lower end sometimes makes a huge difference.
7
[C4D] Daily Builds / Re: Camera in Photographic Exposure mode
« on: 2022-06-13, 19:10:01 »
Have you tried using the c4d camera photographic values?
I know for depth of field at least corona is using the fstop from the default camera parameters, not from anywhere in the tag.
I know for depth of field at least corona is using the fstop from the default camera parameters, not from anywhere in the tag.
8
[C4D] I need help! / Re: How to avoid white border in Corona Renderer?
« on: 2022-06-13, 10:08:00 »
It's not a corona thing, its a C4D thing, saving out transparent PNGs out of the picture viewer is a very hit and miss thing. Just add the alpha as a render layer and then make it transparent in post.
9
[C4D] I need help! / Re: Corona Sun / Corona Sky are not working on new project
« on: 2022-06-12, 23:22:19 »
Lower the exposure.
For outside scenes with just corona sky you'll need to drop to about -3
For outside scenes with just corona sky you'll need to drop to about -3
10
[C4D] I need help! / Re: Bump noise projection issue
« on: 2022-06-12, 11:25:56 »
You have your materials projection set to UV but you don't have any UVs. Set the projection to cubic or spherical and you should be good.
Also, you may need to tweak the phong tag if you're still getting hard edges.
Also, you may need to tweak the phong tag if you're still getting hard edges.
11
[C4D] I need help! / Re: Corona crashes C4d when using rebus plugin
« on: 2022-06-10, 10:11:49 »
Did you update the plugin?
Rebus' plugin doesn't really give update notifications. After the upgrade from 6 to 7, I tried sending a scene and it said corona sky not supported which is ridiculous of course. After talking to CS they said to update the plugin from rebus drop settings. And if that didn't work, to try and manually delete the plugin folder then install the plugin again.
Rebus' plugin doesn't really give update notifications. After the upgrade from 6 to 7, I tried sending a scene and it said corona sky not supported which is ridiculous of course. After talking to CS they said to update the plugin from rebus drop settings. And if that didn't work, to try and manually delete the plugin folder then install the plugin again.
12
[C4D] I need help! / Re: Jagged reflections with C4D Displacer
« on: 2022-05-31, 19:08:43 »
Try increasing the spline points.
Also this might be better done with a Decal with displacement
Also this might be better done with a Decal with displacement
13
[C4D] I need help! / Re: White contour on mask
« on: 2022-05-31, 19:06:39 »
Do you have Straight Alpha turned on by chance?
That usually messes up transparent renders in C4D
That usually messes up transparent renders in C4D
14
[C4D] I need help! / Re: Is there a way to get a mask for/from decals
« on: 2022-05-30, 11:52:52 »
It works, but only kind of.
The colors are random and ofter very close to each other which would make keying a pain.
But the bigger issue is that every decal object gets a different color, and in my use case I would have 6 products with 4 decals each, that would be insane and messy to key, it'd be faster just to rerender it like I always do.
I still don't know why material stacking makes it impossible to get a mask out of the stacked material.
The colors are random and ofter very close to each other which would make keying a pain.
But the bigger issue is that every decal object gets a different color, and in my use case I would have 6 products with 4 decals each, that would be insane and messy to key, it'd be faster just to rerender it like I always do.
I still don't know why material stacking makes it impossible to get a mask out of the stacked material.
15
[C4D] I need help! / Re: Is there a way to get a mask for/from decals
« on: 2022-05-30, 00:12:43 »
No one? Nothing?
This seems like a glaring omission.
This seems like a glaring omission.