Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - ivi72

Pages: [1]
1
Gallery / Re: Living Area Design
« on: 2022-04-20, 00:14:31 »
Nice renders !

My preference goes for the third image (Final 4 & the others vertical shots), i feel like it enhances the composition.

Regards,

J.

2
Gallery / Re: Furniture visualization
« on: 2022-04-20, 00:11:20 »
Nice renders !

I also do some furniture rendering for a client sometimes.

I think he would have said to lower a little bit the eyel level of camera, an maybe to have the camera closer to furniture in order to achieve a more dynamic composition.

Best regards,

J.


3
Gallery / Small musician studio in Paris
« on: 2022-04-17, 18:05:43 »
Hello to community,

Here are three small rendrers for a client, re-designing a small studio in Paris XVIIIe, from scratch.

I'm a pretty new user on Corona rendrer, so comments of any kind on lighting, materials, renders settings..would be greatly apreciated !

Thank you for watching !

Jacques

4
Hardware / Help needed for small workstation building
« on: 2022-03-30, 18:31:30 »
Hello to community,

I'm planning to build a new workstation in order to work with Cinema 4D and Corona Renderer, for archviz purposes.

Im currently working on on my good (but vintage !) 4930k /1070ti / 32gb ram computer, and need to have a more powerful workstation for projects growing in size & complexity.

My current workflow is modelling the arch part on Sketchup, adding assets, trees, & details on C4D, and rendering on Corona.

Below is the list of components i'm wanting to assemble:

PROCESSOR :
AMD - Ryzen 9 5950X - 3,4/4,9 GHz OR AMD or AMD Threadripper 3960X

https://www.amazon.fr/dp/B0815Y8J9N

https://www.darty.com/nav/achat/amd_amd_amd_strx4_ryzen_threadripper_wof_3960x_3_8ghz_24xcore_128mb_280w_trx4_noir__MK1502819111.html

MOTHERBOARD:
Asus - AMD X570 TUF GAMING PLUS - ATX or Gigabyte x570 AORUS Elite ATX / (Or S version)

https://www.amazon.fr/dp/B09HMR42PQ
https://www.amazon.fr/dp/B07TSKR7ZX
https://www.amazon.fr/dp/B07TPPJ5JZ

GRAPHICS:
Msi - GeForce RTX 3080 VENTUS 3X PLUS 10G OC LHR or ASUS ROG STRIX NVIDIA GeForce RTX 3080 V2 OC Edition (or any 3080 available depending prices ( Or maybe a less powerfull GC, 3070 or 3070TI if i go for Threadripper 3960x)

https://www.amazon.fr/dp/B099991CDN
https://www.amazon.fr/dp/B098324LLG

MEMORY:
Kingston FURY Beast 128GB (4x32GB) 3200MHz DDR4 CL16 / KF432C16BBK4/128 or Corsair - Vengeance RGB PRO Series 64 Go (2x 32 Go) DDR4 3200 MHz CL16 or Corsair Vengeance RGB Pro 128 Go (4x32 Go) DDR4 3600 (PC4-28800) C18 or Patriot Memory 128 gb (but can't fin 3600 CL18 on Patiot ?)- I dont know what to choose between 3200 CL16 or 3600 CL18,  i have read they should perform the same, any idea ? ( Maybe i'd go for only 64gb if i go for the Threadripper)

https://www.amazon.fr/gp/product/B097K3L88K
https://www.amazon.fr/dp/B083JVJYMG
https://www.amazon.fr/dp/B083JVJYMG

POWER :
Corsair RM850x (Modular 850 Watt, 80 PLUS Gold)

https://www.amazon.fr/dp/B08ZYSV2ZK

CASE:
Be Quiet! ATX Silent Base 601 (Really like the look, but is that a wise choice ?)

CPU Cooler :

Noctua NH-D15 or Be Quiet ! be quiet! Dark Rock Pro 4 or ARCTIC Liquid Freezer II 280 or Corsair Hydro 115i RGB Platinum, 280mm

https://www.amazon.fr/dp/B07Y87YHRH
https://www.amazon.fr/dp/B07BY6F8D9
https://www.amazon.fr/dp/B07XLM5FV8
https://www.amazon.fr/dp/B0829RYPKM

SSD 1:
Samsung SSD 870 EVO, 1 To (For C: and programs)

SSD2 :
Samsung SSD 870 EVO, 1 To (For current projects & stored assets)

https://www.amazon.fr/dp/B08PC5DKZQ/

- I'm planning to buy all the components, and make it assemble in a local shop, maybe with a little overclocking for the CPU made buy the shop if i stick with the 5960x. Do you think it is safe for a long term usage ? Shoul I choose air or watercooling if i ask for overclocking ?

- I'm not sure if I should go for the 3960x and a less powerfull graphic card, or go for the 5950x an a 3080. As i am working with Sketchup for arch modelling I often experience slow viewport performance on C4D with large projects, where there is a lot of nested compononents & instances (I have read C4D dont handle many objects vey well, and i hope it will get smoother with a more powerful GC)... But 3960x seems 25% faster on renders, which makes me hesitate a lot.

I would be glad to read your comments !

Thank you !

Jacques.

5
Hello to community,

I'm planning to build a new workstation in order to work with Cinema 4D and Corona Renderer, for archviz purposes.

Im currently working on on my good (but very vintage !) 4930k /1070ti / 32gb ram computer, and need to have a more powerful workstation for projects growing in size & complexity.

My current workflow is modelling the arch part on Sketchup, adding assets, trees, & details on C4D & Forester, and rendering on Corona.

Below is the list of components i'm looking at:

PROCESSOR :
AMD - Ryzen 9 5950X - 3,4/4,9 GHz OR AMD or AMD Threadripper 3960X

https://www.amazon.fr/dp/B0815Y8J9N

https://www.darty.com/nav/achat/amd_amd_amd_strx4_ryzen_threadripper_wof_3960x_3_8ghz_24xcore_128mb_280w_trx4_noir__MK1502819111.html

MOTHERBOARD:
Asus - AMD X570 TUF GAMING PLUS - ATX or Gigabyte x570 AORUS Elite ATX / (Or S version)

https://www.amazon.fr/dp/B09HMR42PQ
https://www.amazon.fr/dp/B07TSKR7ZX
https://www.amazon.fr/dp/B07TPPJ5JZ

GRAPHICS:
Msi - GeForce RTX 3080 VENTUS 3X PLUS 10G OC LHR or ASUS ROG STRIX NVIDIA GeForce RTX 3080 V2 OC Edition (or any 3080 available depending prices ( Or maybe a less powerfull GC, 3070 or 3070TI if i go for Threadripper 3960x)

https://www.amazon.fr/dp/B099991CDN
https://www.amazon.fr/dp/B098324LLG

MEMORY:
Kingston FURY Beast 128GB (4x32GB) 3200MHz DDR4 CL16 / KF432C16BBK4/128 or Corsair - Vengeance RGB PRO Series 64 Go (2x 32 Go) DDR4 3200 MHz CL16 or Corsair Vengeance RGB Pro 128 Go (4x32 Go) DDR4 3600 (PC4-28800) C18 or Patriot Memory 128 gb (but can't fin 3600 CL18 on Patiot ?)- I dont know what to choose between 3200 CL16 or 3600 CL18,  i have read they should perform the same, any idea ? ( Maybe i'd go for only 64gb if i go for the Threadripper)

https://www.amazon.fr/gp/product/B097K3L88K
https://www.amazon.fr/dp/B083JVJYMG
https://www.amazon.fr/dp/B083JVJYMG

POWER :
Corsair RM850x (Modular 850 Watt, 80 PLUS Gold)

https://www.amazon.fr/dp/B08ZYSV2ZK

CASE:
Be Quiet! ATX Silent Base 601 (Really like the look, but is that a wise choice ?)

CPU Cooler :

Noctua NH-D15 or Be Quiet ! be quiet! Dark Rock Pro 4 or ARCTIC Liquid Freezer II 280 or Corsair Hydro 115i RGB Platinum, 280mm

https://www.amazon.fr/dp/B07Y87YHRH
https://www.amazon.fr/dp/B07BY6F8D9
https://www.amazon.fr/dp/B07XLM5FV8
https://www.amazon.fr/dp/B0829RYPKM

SSD 1:
Samsung SSD 870 EVO, 1 To (For C: and programs)

SSD2 :
Samsung SSD 870 EVO, 1 To (For current projects & stored assets)

https://www.amazon.fr/dp/B08PC5DKZQ/

HDD :
Seagate BarraCuda, 2 To, HDD – 3,5" SATA 6 Gbit/s 7 200 tr/min, 256 Mo ( For assets and finished projects / file storage)

- I'm planning to buy all the components, and make it assemble in a local shop, maybe with a little overclocking for the CPU made buy the shop if i stick with the 5960x. Do you think it is safe for a long term usage ? Shoul I choose air or watercooling if i ask for overclocking ?

- I'm not sure if I should go for the 3960x and a less powerfull graphic card, or go for the 5950x an a 3080. As i am working with Sketchup for arch modelling I often experience slow viewport performance on C4D with large projects, where there is a lot of nested compononents & instances (I have read C4D dont handle many objects vey well, and i hope it will get smoother with a more powerful GC)... But 3960x seems 25% faster on renders, which makes me hesitate a lot.

I would be glad to read your comments !

Thank you !

J.



6
Gallery / TV Shelf
« on: 2022-03-03, 12:20:29 »
Hello to everyone,

this is the fisrt time i post something on the gallery and on the Corona forum, i hope i'm doing it the right way !

Below are two small renders for a client (interior designer & cabinetmaker), comments are welcome !

Thank you for watching !

7
Sorry if this is the wrong place to post it, but..

The team should strongly consider adding support for the native section planes in sketchup, or something like a "clipping mesh" option, in my opinion.

Maybe its a pointless comment at this stage of developpement, but I thougt i was important to mention it & add it to wishlist again, because this is a feature all the Vray for SU users have been struggling with for years.

All my support to the team !

8
Hi team ! This is another request, from France.

I really would like to give a try to the last Corona for Sketchup release, and give you feedback if that helps.
 
Thank you for your hard work, hoping to read you soon !

Pages: [1]