91
[C4D] Bug Reporting / Re: Program Viewport Problems (r21)
« on: 2021-08-10, 17:00:15 »is this a legit version of r21 or cracked?..
legit!
come on..
2024-04-20, 02:48:35
News:
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
legit!
come on..
92
[C4D] Bug Reporting / Re: Program Viewport Problems (r21)
« on: 2021-08-10, 16:16:34 »
Hello, we have extensively tested this again. The problem is still there.
We then have to close c4d then it works again for a period of time. If we remove corona from the plugin folder, the problem is no longer there. the menus don't move like in the screenshots.
---------------------------------------------------
Maxon Support writes:
Judging from the screenshots, I'd run into a problem with
- the drivers
- a (defective) color profile used in Windows
- special software from the monitor manufacturer that modifies the desktop
- a special own layout
- an installed plug-in
shut down.
To test this, you should first test a fish-installed R21 installation without its own settings and plug-ins.
If the same problem occurs here, check once in Windows "Color Management" whether a different color profile is used than the system standard (sRGB) and change this once.
If special software from the monitor manufacturer is used, remove it.
If that is not the reason and the problem only occurs with an installed plug-in, contact the manufacturer. They may already have a solution to the problem.
If it only occurs with a special layout, you should remove it and, if necessary, create a new one.
Kind regards,
Kind regards,
----------------------------------------------------------
We tested everything but problem still exists when corona is active. heres another screenshot. Using corona 7 final. maybe some tech can remote look whats the problem?
*edit
1628607108_BugReport.txt uploaded
We then have to close c4d then it works again for a period of time. If we remove corona from the plugin folder, the problem is no longer there. the menus don't move like in the screenshots.
---------------------------------------------------
Maxon Support writes:
Judging from the screenshots, I'd run into a problem with
- the drivers
- a (defective) color profile used in Windows
- special software from the monitor manufacturer that modifies the desktop
- a special own layout
- an installed plug-in
shut down.
To test this, you should first test a fish-installed R21 installation without its own settings and plug-ins.
If the same problem occurs here, check once in Windows "Color Management" whether a different color profile is used than the system standard (sRGB) and change this once.
If special software from the monitor manufacturer is used, remove it.
If that is not the reason and the problem only occurs with an installed plug-in, contact the manufacturer. They may already have a solution to the problem.
If it only occurs with a special layout, you should remove it and, if necessary, create a new one.
Kind regards,
Kind regards,
----------------------------------------------------------
We tested everything but problem still exists when corona is active. heres another screenshot. Using corona 7 final. maybe some tech can remote look whats the problem?
*edit
1628607108_BugReport.txt uploaded
93
[C4D] Feature Requests / Node System Bitmap -> automatic filename? 4K Support
« on: 2021-07-29, 11:58:27 »
Hi,
1. when i load a bunch of textures via drag and drop into the node system, I have to click on every singe object and have to look whats filename it is and manualy rename it to organize it.
It would be great when loading new textures, that it changes its name automatic to its filename. something like that could be placed in the corona options when someone needs it.
2. 4k Support with node system preview
1. when i load a bunch of textures via drag and drop into the node system, I have to click on every singe object and have to look whats filename it is and manualy rename it to organize it.
It would be great when loading new textures, that it changes its name automatic to its filename. something like that could be placed in the corona options when someone needs it.
2. 4k Support with node system preview
94
[C4D] Daily Builds / Re: Download V7 RC1 doesn`t work - Download limit reached
« on: 2021-06-18, 11:28:48 »
I cannot download latest rc
downloadlimit is reached
downloadlimit is reached
95
[C4D] Bug Reporting / Re: Program Viewport Problems (r21)
« on: 2021-05-11, 10:26:32 »Hello,
could you also specify your display settings (e.g. Scaling, zoom, etc.), monitor parameters?
Thanks,
Jan
100%
96
[C4D] Bug Reporting / Re: Program Viewport Problems (r21)
« on: 2021-05-11, 10:24:24 »
I just uploaded 1620721415_BugReport.txt
the problem still exists with the DailyBuild from April. Here is another screenshot
the problem still exists with the DailyBuild from April. Here is another screenshot
97
[C4D] Bug Reporting / Re: Program Viewport Problems (r21)
« on: 2021-04-01, 12:59:26 »
hello again another screenshot, in this case corona continues to render but i have no influence on the settings or cinema 4d.
comic sans is an april fool's joke?
comic sans is an april fool's joke?
98
[C4D] Bug Reporting / Re: Program Viewport Problems (r21)
« on: 2021-03-23, 12:25:41 »
Any driver is up to date!
Sometimes i get also this error message and i have to close cinema 4d via task manager..
Sometimes i get also this error message and i have to close cinema 4d via task manager..
99
[C4D] Bug Reporting / Program Viewport Problems (r21)
« on: 2021-03-22, 10:53:30 »
Hello corona team,
we have had problems with the program display with R21. After a few moments, the menu above disappears and the menu items can no longer be clicked correctly.
With a colleague who last updated from the R20 to the R21 and also has a 49 inch monitor with a similar hardware setup, the same problems appear after the update. Just take a look at the screenshots.
What can we do here? It is then only possible to work for some time after closing and restarting the program, until the error occurs again.
At first we thought that it was due to cinema 4d but when i remove the corona plugin everything works without problems
Thank you
greeting
Release: R21
Corona: Latest Daily Build
Component: Editor and Viewport
Operating System: Windows 10
CPU Type: Intel i9
GPU Vendor: NVidia
GPU model and driver: RTX 2070
Other System Information: i9 9900 K, 65GB Ram, 49 Zoll Samsung Ultra Wide Screen,
Accept Privacy Policy: Ja
we have had problems with the program display with R21. After a few moments, the menu above disappears and the menu items can no longer be clicked correctly.
With a colleague who last updated from the R20 to the R21 and also has a 49 inch monitor with a similar hardware setup, the same problems appear after the update. Just take a look at the screenshots.
What can we do here? It is then only possible to work for some time after closing and restarting the program, until the error occurs again.
At first we thought that it was due to cinema 4d but when i remove the corona plugin everything works without problems
Thank you
greeting
Release: R21
Corona: Latest Daily Build
Component: Editor and Viewport
Operating System: Windows 10
CPU Type: Intel i9
GPU Vendor: NVidia
GPU model and driver: RTX 2070
Other System Information: i9 9900 K, 65GB Ram, 49 Zoll Samsung Ultra Wide Screen,
Accept Privacy Policy: Ja
101
[C4D] General Discussion / Re: corona and substance
« on: 2020-12-30, 22:30:43 »
please share scene or show nodes with settings.
of course you should use a hdri to get a similar result
of course you should use a hdri to get a similar result
102
[C4D] Feature Requests / Re: Breakaway panel for materials and shaders int the node editor
« on: 2020-08-22, 09:55:58 »
+++1
Like it how it looks and work in corona 3dsmax or in octane c4d, that would be nice if it can be implimented.
Also it would be great to add shaders between slots easily. Like pressing a key or something and move it bewteen two shaders.
Like it how it looks and work in corona 3dsmax or in octane c4d, that would be nice if it can be implimented.
Also it would be great to add shaders between slots easily. Like pressing a key or something and move it bewteen two shaders.
103
[C4D] General Discussion / Re: Curvature Map 1.0 - Corona Renderer (Shader Effect)
« on: 2020-08-17, 21:27:30 »
nice really great shader! can make this as a plugin?
104
[C4D] Daily Builds / Re: Corona Renderer 6 for Cinema 4D daily build
« on: 2020-07-30, 15:36:53 »You have "Use Legacy (v5) effect" checked in the Camera/Postprocessing section of the Render Settings :)
thanks! now its working, didnt knew this option :o
cheers
tuami
105
[C4D] Daily Builds / Re: Corona Renderer 6 for Cinema 4D daily build
« on: 2020-07-30, 14:36:12 »Ok, even if overridden in the camera, it should still be something you can enable in the VFB (the new lens effects), and is indeed working for me here. I'd be sure to create a new camera/camera tag rather than reuse an old one see if that makes a difference.
Hey Tom,
I started several attempts but I just can't get it to work. With a camera or without it remains that I can not activate the lens effects, maybe you still have an idea or I'm queuing up very stupid.
Thanks
R21
RC1 V6
Win10