[ARCHIVE] Pre-1.0 Daily builds

[blank...]

Does anyone has any scene with a lot of noise from highly directional/IES lights? Can you share it with me?

You mean like this?


It's just a simple test scene with a simple test IES, i'm sure you're more than capable of creating it, but here it is :)

Btw. material override is still broken.

[Ondra]

this is a synthetic one, we are looking for something more... natural ;)

[kregred]

different shape of light from the same ies with coronalight (right)  and photometric light (left)

[Siahpoosh]

Keymaster , i sent you an interior scene .

[Ondra]

thanks

[DKulakov]

Noisy Pict - Disk light with IES (LC default - 2)
Clear Pict - Sphere light with IES (LC - 4)

Can be done so that the disk was also clean

Scene:
https://yadi.sk/d/fG4ObBq5bwntN

[Siahpoosh]

Keymaster , i found something interesting in light sampling , watch this :

[maru]

What were you moving in that video? If it was a light being turned on/off then I would say this is normal because more lights = slower rendering. Also, what were your render settings?

[Siahpoosh]

What were you moving in that video? If it was a light being turned on/off then I would say this is normal because more lights = slower rendering. Also, what were your render settings?

no i didnt turn off light , it will happen when i have some lights in near to each other , so if i move lights further from each other it will solve , in this test i have directional lights in opposite direction . see this topic :
https://forum.corona-renderer.com/index.php/topic,5497.msg37717.html

[Siahpoosh]

i just moving light , watch this one :

[Stan_But]

Low intensiveness of light reflections with coronaIES and very low intensive of second reflections((
Even with more brightness of coronalight than photometric light
I show photometric light as example

[DKulakov]

Another point
The closer the light source - the more noise

[Bigguns]

Is it me or.. I never succeded in maknig work the displacement for my character in corona using the displacement option in the corona mtl... the mesh get hole.. and when I play with the water level it desappears..etc .. only problem.. I tried everything.. never work..  is bugged  ??

[Ondra]

New daily build: https://forum.corona-renderer.com/index.php/topic,942.msg37877.html#msg37877

[romullus]

Is it me or.. I never succeded in maknig work the displacement for my character in corona using the displacement option in the corona mtl... the mesh get hole.. and when I play with the water level it desappears..etc .. only problem.. I tried everything.. never work..  is bugged  ??

That's the way water level works. I found this quite strange at first, but now i think it is logical - if you don't want geometry to be cutted away, you should use texmap clamping instead.