Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - aurelarchi

Pages: 1 2 [3] 4 5
31
[Max] I need help! / Re: DR problem.............
« on: 2015-03-09, 22:40:05 »
Don't worry you help to solve it !
I fact you have choice for a network link :
For example my NAS is named z: on network drive but dont work in UNC link on DR.
So i just replaced the name of the network drive by the ip adress.
This is mean :
Before  -> z:\Données\...............
Now -> my nas ip address\Données\..............

Now DR is ok, but i clearly don't have this issu on vray , i can use z: , \\NAS , ip adress, all this link in UNC work good.

32
[Max] I need help! / Re: DR problem.............
« on: 2015-03-09, 18:47:51 »
Ok solved !
At first i used UNC path like this : \\NAS\Données\................
or like this : z:\Données\...............
But DR is only ok when i use : \\my nas ip address\Données\..............

That's all folks !
Thank you all for the help ! ;)

33
[Max] I need help! / Re: DR problem.............
« on: 2015-03-09, 17:59:46 »
Drserver always started as administrator.
Corona fully activated on the slaves.

34
[Max] I need help! / Re: DR problem.............
« on: 2015-03-09, 17:43:24 »
Yes Maru, EXR's by the 2 slaves from the scene with the floor texture.
I tried with UNC in z:\ and \\NAS\ same issu...............
The main machine work with the NAS too and no problem with the link..................

35
[Max] I need help! / Re: DR problem.............
« on: 2015-03-09, 15:08:58 »
Of course i'm interested i use only DR rendering for all my commercial project so i have to found where is this error.
Please find here the EXR's files :

https://www.wetransfer.com/downloads/b323042ce2af5990ab9615d20635990420150309140148/8df2fcf4e85bb60d0f04a19f4ccbd88e20150309140148/545718

Thanks

36
[Max] I need help! / Re: DR problem.............
« on: 2015-03-09, 12:05:50 »
Ok !

Thanks a lot for your time ! :)

37
[Max] I need help! / Re: DR problem.............
« on: 2015-03-09, 11:32:04 »
Hi !

This is the same scene where error occurs.
Simple white wall and a wood parquet as :
Z:\dossier ARCHI\Maps\Bois\cg source wood textures\
Z:\ is my NAS

No plug here.

Strange thing : I tested a Viz park scene, the grass one made for Corona and no DR problem......................
I saw the bitmap files are forced on gamma 2.2 on the windows files loader, maybe it's the key ?

@Frood

Quote
And there may be still a path issue left: I would literally NEVER use mapped drives letters to link assets in any networked environment, even when working locally and even if slaves have access to and mapped the network source. Allways use UNC paths. The material you used for the floor is mapped to "Z:\dossier ARCHI\Maps\Bois[...]". This should read "\\NAS\Données\dossier ARCHI\Maps\Bois[...]". This is just a general workflow hint and not part of the issue as far I can see (but of many others).

So if i understand i have to use \\NAS\Données\........... and not "Z:\dossier ARCHI\.... ?

For vray i'm on the 3.0 version maybe this is why you found some errors, but vray work perfectly on DR.

Thx !

Update 1 : All the link on the Viz park scene are in Z:\dossier ARCHI\...............
Work perfectly...............



38
[Max] I need help! / Re: DR problem.............
« on: 2015-03-09, 09:17:42 »
Any solutions on this ?
For information Corona working perfectly on my worstation and found the files on the NAS.

39
[Max] I need help! / Re: DR problem.............
« on: 2015-03-06, 21:00:40 »
Sorry for this !
Wrong one, please check this one.
I added the map too.

Thx !

40
[Max] I need help! / Re: DR problem.............
« on: 2015-03-06, 18:30:08 »
You can find here the test scene.

Thx

41
[Max] I need help! / Re: DR problem.............
« on: 2015-03-06, 17:29:32 »
Of course Maru!
I do that soon as i can !

Thank for the help !!

42
[Max] I need help! / Re: DR problem.............
« on: 2015-03-06, 14:39:19 »
Ok i tested with the Disable User Account Control down.
Same issue...................

43
[Max] I need help! / Re: DR problem.............
« on: 2015-03-06, 13:09:01 »
Yes thanks this is helpfull but like you said this kind of trick will lead to a less secure system.

44
[Max] I need help! / Re: DR problem.............
« on: 2015-03-06, 12:40:48 »
" Auslogics Bootspeed" ?

Strange software to resolve missing map or map link......................
I'm actually testing the same scene, with the same texture link on vray DR, working well.
When i switch on Corona i got the same issu.
Strange isn't it ?

45
[Max] I need help! / Re: DR problem.............
« on: 2015-03-06, 12:08:13 »
Ok, gamma checked on all the slave, no prob is ok.
I tested DR with a white mat scene, ok too.
So the problem come from a missing texture file on the NAS. The wood one.
But, all the slave have access on it and the Asset Tracking Dialog is ok, link are ok too.
Strange.................Tested the same scene on vray DR, all is ok.

Pages: 1 2 [3] 4 5