Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - jjaz82

Pages: [1] 2 3
1
[Max] General Discussion / Problem license corona 9
« on: 2022-11-15, 15:58:06 »
hi all, i can't solve a problem related to the corona9 license

for each node i have to activate the license of 3dsmax 2023 and corona, but when i try to activate  corona 9 , 3dsmax 2023 giving an error pop up shut down , i tried to reinstall both 3ds max and corona 9, do you have any advice, m i missed any discussion thread where this issue has already been discussed? thank you

Nicola

2
General CG Discussion / icon 3dsmax 2022
« on: 2022-02-21, 11:49:28 »
Hi everyone, since I switched to 3dsmax 2022 it generates a preview of the file instead of the usual icon, this is annoying for me, I have organized each file with its own preview and the double images mess everything up, you know if it is possible to disable this thing in files.max? thank you

3
General CG Discussion / Strange behavior 3dsmax 2022 and dr
« on: 2022-01-11, 14:22:34 »
When the dr starts in the nodes 3dsmax 2022 starts up and asks for username and password, with 3dsmax 2021 this did not happen, did it happened to someone else?
thank you

Nicola

4
General CG Discussion / Crazy blinking UI
« on: 2021-11-24, 16:30:17 »
Hi, for some weeks I have this problem, lately more and more often, when it starts it goes on minutes in which I can not save or do any other action, I tried to reinstall the video drivers and all the Microsoft-Visual-C-Runtime, can someone help me?


i have installed corona 7 and 3dsmax 2021

Thank you



5
Hi everyone, i sarched on forum but i cant find other tread about my problem.
if there is other discussion sorry in advantege.
i have problem with dr on backburner on animation, i have 3dsmax 2021 and corona 6, when i start a job first frame work perfectly, all node receve scene and start to work, but at second frame all node stop on downloading scene and dont contribute to work...
thank you
Nicola


this is a node DRlog:
2020-10-05 17:25:41   Running command:
"C:\Program Files\Autodesk\3ds Max 2021\3dsmaxcmd.exe" "C:\Users\utente\AppData\Local\CoronaRenderer\DrData\corona_dr.max"  -continueOnError -gammaCorrection:1 -rfw:1 -sf -v:5  -postRenderScript:"C:\Users\utente\AppData\Local\CoronaRenderer\DrData\post.ms"
2020-10-05 17:25:46   Started loopback connection with 3ds max
2020-10-05 17:25:47   Cannot contact 3ds Max, trying again ...
2020-10-05 17:25:47   3dsMax started successfully
2020-10-05 17:25:47   Accepted remote connection from 192.168.1.71
2020-10-05 17:25:47   Started connection #25
2020-10-05 17:25:47   Handshake: <root><DataType>0</DataType><Handshake>init</Handshake><FrameName>3</FrameName><HostVersion>Max2021</HostVersion><CameraName>CoronaCamera001</CameraName><Region>0 0 0 0</Region><ImageSize>1500 1500</ImageSize><MD5/><CoreVersion>6</CoreVersion><IpAddress>192.168.1.71</IpAddress></root>
2020-10-05 17:25:47   Saving incoming scene to C:/Users/utente/AppData/Local/CoronaRenderer/DrData/received_scene_2476406284.max
2020-10-05 17:25:48   Received sampling focus mask (region 0 0 1500 1500)

this is coronamax log:


2020-10-05 17:25:33  This scene uses legacy (pre-v4) medium/refraction resolving that is not based on geometry normals and produces incorrect results when multiple medium containers are intersecting. The scene was loaded with the legacy behavior to make the rendered result more consistent with older versions of Corona, but we strongly recommend switching to new behavior using the button below. If normals orientation is correct, switching will preserve or improve the look of the scene.
2020-10-05 17:25:33  Disabling 'max sample intensity' or setting it to high values can cause fireflies to appear in the image that will never go away.
2020-10-05 17:25:46  Bound to localhost.
2020-10-05 17:25:46  Sending handshake to DrServer.
2020-10-05 17:25:46  Heartbeat socket opened.
2020-10-05 17:25:46  Local connection with DrSlave established.
2020-10-05 17:26:05  This scene uses legacy (pre-v4) medium/refraction resolving that is not based on geometry normals and produces incorrect results when multiple medium containers are intersecting. The scene was loaded with the legacy behavior to make the rendered result more consistent with older versions of Corona, but we strongly recommend switching to new behavior using the button below. If normals orientation is correct, switching will preserve or improve the look of the scene.
2020-10-05 17:26:06  Disabling 'max sample intensity' or setting it to high values can cause fireflies to appear in the image that will never go away.
2020-10-05 17:26:06  DR slave started waiting loop
2020-10-05 17:26:06  DR slave received sampling mask, region 0 0 1500 1500







6
[Max] I need help! / corona 3 hot fix 2 install problem
« on: 2019-04-08, 16:21:28 »
Hi everyone.
Finally i have time and free render farm for update corona from version 2.0 to 3.0 fix 2, i installed it on all my node except one where i can't install the hotfix.
when i try to install, windows show me this error...
i tried remove completly corona end reinstall it from zero..
i wrong something?

all pc have win 7 and before now, all past installation was completed without error or problem..

thank you

PS:
update: now all the nodes break calculation continuously, I installed corona as I always did.
did I miss any discussion about it?
thank you

now i had to re-install corona 2 version for continue working.


7
Hi everyone.
Finally i have time and free render farm for update corona from version 2.0 to 3.0 fix 2, i installed it on all my node except one where i can't install the hotfix.
when i try to install, windows show me this error...
i tried remove completly corona end reinstall it from zero..
i wrong something?

thank you

8
[Max] General Discussion / exr problem 16bit clamped
« on: 2018-10-05, 15:31:46 »
hi everybody
lately I have this problem.
i saved my render in exr, half format , 16 bit and the highlights results clamped like example.
i have attached exr file, there is something wrong?
thank you in advanced
Nicola



9
General CG Discussion / Toon / painterly shader
« on: 2018-09-26, 15:19:11 »
Interesting Case Study for non Non Photoreal Rendering.


http://www.lollipopshaders.com/case-studies/9to3animation/

maybe a star of point for a future shader? XD

10
[Max] I need help! / vase glass absorption effect problem
« on: 2018-07-17, 15:53:22 »
hi everybody.
i tried to reproduce this effect on glass vases, i don't know if i wrong something or if i found a bug,  the model is one with 3 different id, i use a corona multimap on absorpion color for give different color to the parts,

i attached the exemple
my result
and a test with ior refraction set to 1, where absorption effect result correct.


thank you :)

Nicola

11
Hi, i tested this scene in two different pc an i7 3960x and a dual e5 2650 v3

A dual xeon should be faster than i7 but it is not.

it's strange or I'm missing something?

Thank you.
Nicola



12
[Max] I need help! / Strange behaviour in dr with backburner
« on: 2018-01-25, 11:26:33 »
Hi everyone
I recently had this problem in one scene but if i start backburner , if use dr directly it seems to have no problem.
do you know where is the problem?
thank you
Nicola

13
Gallery / Faber Hoods
« on: 2016-05-07, 14:00:36 »
Hello everyone. I want to share with you my latest work done for Faber with a photography studio I work with.
Over the years I tried various render engines , MentalRay, Maxwell Render, Vray but since I started using the Corona alpha three years ago I slowly moved all my works on this software , since its birth i found it very intuitive and fast, facilitating my work process.
I want to congratulate to the development team, keep it up.
Nicola

http://lnx.gabriottifotografi.it/site/lens_portfolio/martex-2/




14
General CG Discussion / VRscans
« on: 2016-02-24, 09:40:01 »
very interesting, in my work lately I need to simulate complex materials (increasingly complex), if  I understand, i just send a sample and they will generate the finished material.

http://www.vrscans.com/

15
[Max] Resolved Bugs / corona light include exlude problem
« on: 2016-01-27, 11:42:51 »
Hi, i serched in the forum but i didn't find an other discussion to this problem.
If i use include exclude option in corona light, all the lights that I create later they have the option active, although not visible in the menu include exclude.

thanks
Nicola

Pages: [1] 2 3