Chaos Corona Forum
Chaos Corona for 3ds Max => [Max] General Discussion => Topic started by: jjaz82 on 2020-10-05, 17:33:37
-
Hi everyone, i sarched on forum but i cant find other tread about my problem.
if there is other discussion sorry in advantege.
i have problem with dr on backburner on animation, i have 3dsmax 2021 and corona 6, when i start a job first frame work perfectly, all node receve scene and start to work, but at second frame all node stop on downloading scene and dont contribute to work...
thank you
Nicola
this is a node DRlog:
2020-10-05 17:25:41 Running command:
"C:\Program Files\Autodesk\3ds Max 2021\3dsmaxcmd.exe" "C:\Users\utente\AppData\Local\CoronaRenderer\DrData\corona_dr.max" -continueOnError -gammaCorrection:1 -rfw:1 -sf -v:5 -postRenderScript:"C:\Users\utente\AppData\Local\CoronaRenderer\DrData\post.ms"
2020-10-05 17:25:46 Started loopback connection with 3ds max
2020-10-05 17:25:47 Cannot contact 3ds Max, trying again ...
2020-10-05 17:25:47 3dsMax started successfully
2020-10-05 17:25:47 Accepted remote connection from 192.168.1.71
2020-10-05 17:25:47 Started connection #25
2020-10-05 17:25:47 Handshake: <root><DataType>0</DataType><Handshake>init</Handshake><FrameName>3</FrameName><HostVersion>Max2021</HostVersion><CameraName>CoronaCamera001</CameraName><Region>0 0 0 0</Region><ImageSize>1500 1500</ImageSize><MD5/><CoreVersion>6</CoreVersion><IpAddress>192.168.1.71</IpAddress></root>
2020-10-05 17:25:47 Saving incoming scene to C:/Users/utente/AppData/Local/CoronaRenderer/DrData/received_scene_2476406284.max
2020-10-05 17:25:48 Received sampling focus mask (region 0 0 1500 1500)
this is coronamax log:
2020-10-05 17:25:33 This scene uses legacy (pre-v4) medium/refraction resolving that is not based on geometry normals and produces incorrect results when multiple medium containers are intersecting. The scene was loaded with the legacy behavior to make the rendered result more consistent with older versions of Corona, but we strongly recommend switching to new behavior using the button below. If normals orientation is correct, switching will preserve or improve the look of the scene.
2020-10-05 17:25:33 Disabling 'max sample intensity' or setting it to high values can cause fireflies to appear in the image that will never go away.
2020-10-05 17:25:46 Bound to localhost.
2020-10-05 17:25:46 Sending handshake to DrServer.
2020-10-05 17:25:46 Heartbeat socket opened.
2020-10-05 17:25:46 Local connection with DrSlave established.
2020-10-05 17:26:05 This scene uses legacy (pre-v4) medium/refraction resolving that is not based on geometry normals and produces incorrect results when multiple medium containers are intersecting. The scene was loaded with the legacy behavior to make the rendered result more consistent with older versions of Corona, but we strongly recommend switching to new behavior using the button below. If normals orientation is correct, switching will preserve or improve the look of the scene.
2020-10-05 17:26:06 Disabling 'max sample intensity' or setting it to high values can cause fireflies to appear in the image that will never go away.
2020-10-05 17:26:06 DR slave started waiting loop
2020-10-05 17:26:06 DR slave received sampling mask, region 0 0 1500 1500
-
How exactly are you using both Corona's DR and Backburner?
Can you send full logs? https://coronarenderer.freshdesk.com/support/solutions/articles/12000002065-gathering-dr-logs
-
From a workstation i send a job with DR to a master node on render farm, where it's set up an backburner server and master.
here a screen of node and all full logs
-
I tried, the problem happens even if I launch the animation without backburner.
-
I can see these errors:
2020-10-05 16:48:49 Cannot load UHD cache from file. New cache will be calculated from scratch.
Error: Cannot open/read/write file '//NAS/Scambio/nicola/animazione/test/uhd.uhd'
Can you try with path tracing only (path tracing as both primary and secondary GI solver in the Performance tab) and see if the issue persists?
If it does, please send us the scene and we will see if we are able to replicate this behavior:
https://corona-renderer.com/upload
-
yes, also with path tracing.
the scene was uploaded
thank you
Nicola
-
Hi maru, have you receved the scene?
-
Sorry for the delay. Yes, I have the scene and will look into it ASAP.
-
Looking at it now, it seems that you are using Corona Renderer 6 (non-hotfix) and its DR server.
In Corona Renderer 6 Hotfix 1 we can see:
"- Fixed DR getting stuck when rendering the second frame of an animation"
So please download and install Corona Renderer 6 Hotfix 1 and its DR server and try again. The best idea is to un-install the non-hotfix version first from the Windows "Programs" list.
Hope that helps!
-
hi maru, thank you for reply.
it's very strange, I felt like I had the latest version installed, i try how did you say.
Nicola
-
perfect, now work all.
thank you.