Author Topic: CoronaLight  (Read 6335 times)

2018-12-02, 05:50:18

Hathor

  • Active Users
  • **
  • Posts: 20
    • View Profile
Hello! my suggestion:
1) unhide A,B,ZZYZX parameters, and link it with coro_dimX, coro_dimY, coro_dimZ
2) add the ability to input light color by temperature

here is my version of this object: https://drive.google.com/open?id=1NZ-FEoNrqWKakxxHMPm6p96L6BFaq69I
You can use it if you find it useful

2018-12-06, 14:33:11
Reply #1

giza

  • Active Users
  • **
  • Posts: 26
    • View Profile
Very cool thanks for adding the color temperature.

2018-12-29, 07:01:37
Reply #2

Lenar S

  • Active Users
  • **
  • Posts: 5
    • View Profile
Archicad crashes when adding groups with multiple light sources to light select

2018-12-30, 04:15:31
Reply #3

spr0ckets

  • Active Users
  • **
  • Posts: 47
    • View Profile
I don't think the light select and lightmixer features are working correctly in the current version yet.

You can still use Lightmix and add individual lights , but chances are you're going to experience issues like crashing and freezing and such until they sort all the issues out.


2019-01-06, 10:06:10
Reply #4

Jan Špaček

  • Former Corona Team Member
  • Active Users
  • **
  • Posts: 58
    • View Profile
Hi, thank you for the suggestions! Using the A, B, ZZYZX as light dimensions should be ok, I hope I won't stumble upon any nasty surprises with GDL :-) As to the temperature, I think the best solution would be to use the Corona color picker from the CoronaLight and add the temperature option to the color picker.

2019-01-08, 16:54:40
Reply #5

Hathor

  • Active Users
  • **
  • Posts: 20
    • View Profile
hello!
my new version coronalight

now it have:
- color by temperature
- rotate by angle (not by arrow coordinates) - it is more predictably
- show ABZ dimensions, according half dimension XYZ (and inverseв relationship)
- in 3d hotspots in each side
- hotspots in 2d (taking into account the rotation), also hotspot for Z dimension
- link dimensions button

https://drive.google.com/open?id=1NZ-FEoNrqWKakxxHMPm6p96L6BFaq69I
please, test it

dear creators, if it is good and useful, put it in new daily build

2019-01-08, 16:56:51
Reply #6

Hathor

  • Active Users
  • **
  • Posts: 20
    • View Profile
Hi, thank you for the suggestions! Using the A, B, ZZYZX as light dimensions should be ok, I hope I won't stumble upon any nasty surprises with GDL :-) As to the temperature, I think the best solution would be to use the Corona color picker from the CoronaLight and add the temperature option to the color picker.

look at my object! i can help you with gdl, if you need

2019-06-20, 11:07:51
Reply #7

alexhajdu

  • Former Corona Team Member
  • Active Users
  • **
  • Posts: 233
  • SW engineer - ArchiCAD
    • View Profile
Hi, thank you for the suggestions! Using the A, B, ZZYZX as light dimensions should be ok, I hope I won't stumble upon any nasty surprises with GDL :-) As to the temperature, I think the best solution would be to use the Corona color picker from the CoronaLight and add the temperature option to the color picker.

look at my object! i can help you with gdl, if you need

Thank you, Hathor. I'll take a look at your solution soon...