Corona light settings

[alexhajdu]

Here is the updated light. Please test it and send your feedback as always.
Thanks rozky for your help!

[tma]

It works ok form me :)



P.S:
I've just remembred this other modified corona light object from "Hathor".
https://forum.corona-renderer.com/index.php?topic=22725.0
it as some intresting additions to the default corona one ( but it doesn"t show up in section.)

[LUXi]

I need your help on how to use gsm file?

[tma]

Is it for importing the gsm ?

[LUXi]

I know the steps File > Libraries and Objects > Library Manager...etc. but I got an error message.
Must be the my version HUN is the issue... I am going to try with INT version.

[rozky]

Hi LUXi, what kind of error message? AC22HUN?

[rozky]

Corona light for Archicad 21

[LUXi]

@rozky The message was: The assigned file is not lamp file. Please find a valid lamp file...it is translated roughly from Hungarian
BUT the AC21 version is OK!
THANK YOU!

[LUXi]

I got an issue with the new light.
See the attached file no emitting and the light is black.
The reference light is ok but not turnable to 90 degree


AC21HUN

[TomG]

Might the light be facing the wrong way? A quick test would be to enable "Emit on both sides" (then you'll know it's just that the light is facing the wall, rather than not emitting light at all)

[rozky]

I got an issue with the new light.
See the attached file no emitting and the light is black.
The reference light is ok but not turnable to 90 degree


AC21HUN

Hi LUXi,
check light settings and make sure you have enabled light.

[LUXi]

I've found the solution.
The negative sign is the issue. In 3D view is possible to adjust the lamp to negative side size
It should not be allowed the negative number.

[Hathor]

it as some intresting additions to the default corona one ( but it doesn"t show up in section.)

I specifically hid it from the section window for myself. Sorry, I forgot to remove it or write about it.
In this version, I added a checkmark for the "show in section" function:
https://drive.google.com/open?id=1NZ-FEoNrqWKakxxHMPm6p96L6BFaq69I

[tma]

Perfect, thanks.