Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - davetwo

Pages: 1 2 [3] 4 5 ... 22
31
Hardware / Re: Very noisy new ryzen build
« on: 2024-01-10, 13:08:34 »
In the Armory Crate dashboard I've activated Power Saving and that does help a bit actually. Good idea!
Its still certainly louder than the old machine - but bearable....

32
Hardware / Very noisy new ryzen build
« on: 2024-01-10, 09:44:42 »
I've just completed (I hope!) my first PC build.

Its a Ryzen 7950X, built one a ASUS ProArt X670E, with Noctua NH-U12A cooler, plus 4 case fans (three at the front, one at the back) in a Fractal North case.

I set the fan curves to quiet in the bios, and also tuned and set them to AI cooling in the armory crate app.

It's silent when idle. But as soon as I use use IRR or viewport rendering the fans kick in quite high and very noisy. The CPU temp is straightaway 75-80ยบ.

Have I messed up my cooling somewhere? Or the fan setup? Or is it just a noisy build?
My co-workers are grumbling a bit :( as my previous PC was always almost silent.

Hopefully someone can give me some pointers. Thanks in advance.

33
[C4D] I need help! / Re: Displacement incorrect
« on: 2024-01-05, 21:31:35 »
This

34
[C4D] I need help! / Re: Displacement incorrect
« on: 2024-01-05, 21:23:03 »
linear displacement normally requires a + and - value where 50% grey = 0%.

So in your case 0% displacement is grey (use a soild colour layer) and the dove bitmap is -X (use the image on top multiplied) with and equivalent +X value 

35
Hi Forum!

Hope you had a great Xmas All. Got a project I'm jumping onto and unfortunately it is all done in Octane. It is a fairly big exhibition space and has tons of materials. I do not have Octane and wonder if there is any way of converting it to Corona materials? The scary thing is I can't even see the structure of the materials, at least with RS you can open them to see what is going on so easier to convert manually. I have a dreaded feeling I will have to do this manually which will take a day or 2... any suggestions? Many thanks, John :-)

Unless someone has made a personal script I think its a manual Job i'm afraid. If you download a octane trial, you could probably get a octane-to-native c4d script - then use the corona convert tool from there.

36
+1.
 A 'solo' node i believe its called in some other software

37
[C4D] Feature Requests / Re: Shift lens in corona camera
« on: 2023-12-11, 20:59:06 »
I know it's hard to break your established workflow. And I guess if you need to rebuild and match scenes already set up in V-ray this may be a pain. But Corona doesn't have this, and I've never needed it personally.

Just keep your camera straight and use a combination of camera positon and Y offset to get the same result.

38
I must say that I also also didn't realise I had auto-renewal set for V-ray until after it was paid. But after one email to support, it was cancelled and refunded within days.

I would imaging that the chaos licencing support is the same team for both V-ray and Corona (are you in the EU?) so I'd recommend re-contacting them to make sure there isnt some confusion about your case in particular.

I don't think much will be acheived by posting on corona user forum TBH.

39
The OP it talking about the phenomena where gold reflecting gold seems to multiply the saturation/colour of the reflections so that they appear orange.

This is replicated in the real world (see attcheed) but certainly seems rather pronounced in Corona (It's looked odd to me before too).

I'm not sure if this is a shortcoming in Coronas material - or if the real-world metals always have more imperfections/coatings/grease etc which diminish the effect.


40
Hardware / Amount RAM Needed?
« on: 2023-11-27, 21:21:42 »
Forgive my ignorance. I'm thinking of building my first PC around a 7950X. But on my local shop's part picker - it keeps limiting me to 64GB of DDR5 RAM on the motherboard.

Is there something about DDR5 RAM that is limiting it to 2 slots? Is 64GB remotely enough these days?
I always thought that Corona was somewhat RAM hungry so my old 2950X pc had 128GB of DDR4...

41
[C4D] I need help! / Re: Curved Mirror Distortion
« on: 2023-11-25, 13:35:33 »
have you double checked that the surface is definitely flat? No problem in principle (see attaced)

42
Wanna share the scene so others can check there's nothing odd with it?

43
[C4D] Bug Reporting / Re: Chaos Cosmos opacity maps missing
« on: 2023-11-22, 16:27:54 »
Seems to work fine for me (see attached). Have you simply tried re-downloading the asset?

44
[C4D] Feature Requests / Re: Custom shape render region?
« on: 2023-11-22, 10:00:46 »
Ah, how interesting. Who knew!
(Although in my case the buffer area/extra padding was for Render Selected rather than Render region, where you could just make the region a bit bigger anyway.

45
[C4D] Feature Requests / Re: Custom shape render region?
« on: 2023-11-21, 09:30:11 »
Use render selected. just drag in the geo for that part.

On a slight tangent I do wish that it was possible to use render selected with some padding, as on areas with stronger DoF it wouls avoid dark fringing.

Pages: 1 2 [3] 4 5 ... 22