Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - NicolasC

Pages: [1] 2 3 4
1
Jobs / Looking for 3dsmax users
« on: 2022-02-04, 10:11:58 »
Good morning,

We're looking for one or several teams of 10-20 persons, 3dsmax users, for a job that would last several months. Not 20x individuals, we need a team managed by a supervisor.
Please contact me in PM for more details if you're interested.

Thanks in advance,

Regards.

2
Hello,

I was rcently wondering if it would be possible to implement a similar behavior as Color Correct, with possibility to use settings from another Color Correct map. For UVW Randomizer, I think it could become very handy, when using several maps (diffuse, glossiness, normal ...) for a material, to be able to "link" UVW Randomizer maps with each other. It's possible using multiple Bezier Float controllers, but that can quickly become both time-consuming and messy ... Or am I missing something here ?
What do you guys think ?

Thanks a lot :)

Regards.

3
[Max] I need help! / Max Ray Depth somehow broken ?
« on: 2021-09-25, 18:11:46 »
Hello :)

I've a problem with Ray Depth. FYI, I'm using Corona V7.1, with 3dsmax 2021.3.2.
My scene has a typical situation for ray depth I guess: in a nutshell, mirror in front of another mirror (see cropped rendering enclosed). And it doesn't matter how high I set Max Ray Depth, it seems rays are still cut to early, I shouldn't end with black, right ?

Thanks in advance for your help.

Regards.

4
[Max] Feature Requests / Distributed Rendering button
« on: 2021-07-13, 10:00:07 »
Hello,

It would be very practical to get a button in the official Corona toolbar to enable / disable Distributed Rendering.
As an option, right click on it would open Render Setup directly on Distributed Rendering settings rollout :P

What do you guys think ?

Thank you.

5
Hello,

I was wondering if there were any chance to get some polishing in the VFB presets for Tone Mapping:
- ability to define a presets path, like for LUTs
- then getting a dropdown list, listing the presets in the defined path, thus making it easier to navigate, like for LUTs

What do you guys think ?

Thank you :)

6
[Max] General Discussion / Maxscript access to LightMix
« on: 2021-03-16, 15:06:41 »
Hello,

Is it possible to define LightMix creation options with Maxscript ? so far, the Corona Maxscript Wiki only shows how to access to Setup Dialog, right ?

Thank you.

7
Hello,

I've just noticed a problem when using a glass material, as base material, with Thin (no refraction) option in Corona Layered material. It seems there are no more reflections !
Can anyone confirm that, please ?
I use 3dsmax 2021.3, with Corona v6 hotfix1.

Thanks.

8
[Max] Feature Requests / Slate / Edit Bitmap
« on: 2020-05-16, 21:40:16 »
Hello :)

Would it be possible to make Corona Bitmap compatible with Edit Bitmap feature available with a right-click on a standard 3dsmax bitmap, please ?
I mean, in Slate Preferences, we can define our Bitmap Editor Path, so that when we right-click on a bitmap node in Slate's view, than hit Edit Bitmap, it directly launches our favorite bitmap edition app (PS, Affinity Photo or whatever). I was recently lost not seeing this Edit Bitmap option anymore, before realizing I was simply right-clicking on a Corona Bitmap, and not on a 3dsmax standard bitmap ...

Thanks in advance,

Regards.

9
[Max] I need help! / 3dsmax Substance plugin & Corona 5
« on: 2020-03-28, 12:39:58 »
Hello,

With 3dsmax 2020.3, I've recently noticed the Substance plugin (v2.3.1) returned an error about Renderer Compatibility, not sure if it's worth bothering or not. If I go in Substance menu -> Substance Settings -> Render Compatibility "Open Dialog", I get a window warning that "The Substance plugin has detected an incompatible renderer ...". Any idea about why this appears and what are the consequences if any ?

Thanks in advance,

Regards.

10
[Max] Feature Requests / Corona Camera - Object Visibility
« on: 2020-03-07, 14:05:30 »
Hello,

Regularly, I find the name of this functionality pretty confusing. While Object Visibility makes objects totally non-renderable, sometimes it would be very practical to only make them invisible to camera, but keeping them visible to reflection/refraction, and keeping their shadow casting as well. Do you guys think it could be possible to add an option allowing to choose ? Object(s) in this Exclude List could be either totally non-renderable or simply not visible to camera ?

Thanks in advance,

Regards.

11
[Max] Feature Requests / CProxy - scale
« on: 2020-02-07, 12:31:27 »
Hello,
I'm sorry if this has already been discussed, but I can't find a clear answer about that. Would there be possible to add a Scale parameter in Corona Proxy, like VRay Proxy proposes ? It would very very practical ...

Thank you,

Regards.

12
[Max] Feature Requests / VFB - region activated
« on: 2018-07-26, 16:59:51 »
Hello,

A little but annoying thing in VFB region rendering that would be great to solve. Let's say you work on a scene, using region rendering to check things here and there. Then you save the scene, close 3dsmax, and reopen the scene later, open the VFB, region rendering is greyed out ... no way to know if it's activated or not. So you have to run rendering to discover region rendering is actually on, which can often be annoying to say the least. Please guys, would it be possible to either:

- make region rendering controls available when VFB is run for the first time in a scene, so that we can set it off before rendering if needed
- or display a warning message like "Region rendering was left activated, do you want to keep it on ? with Yes button (-> it stays on) and No button (-> it's set off)

What do you think ?

Thank you.

13
[Max] Feature Requests / New Corona toolbar improvement
« on: 2018-06-06, 11:12:10 »
Hello :)

While the new in-house toolbar is globally very sweet, would it be possible to enhance the light creation part ? I mean, instead of changing the light type afterwards (plane, disk ...), would it be possible to choose directly what type we want to create ? for example, keeping the mouse button clicked would provide a "dropdown" buttons list, thus allowing to choose the light type ... that would be very practical.
For example, you can already use such a behavior with several buttons in 3dsmax: Transform Coordinate Centers (Pivot Point center, Selection Center, System Coordinate Center) , Snaps Toggle (3d, 2.5d, 2d), various tools "under" the Align tool,  various tools "under" the Array tool ...

14
Hello,

Being an heavy user of proxies (CG for retail ...), I was missing such a thing for a long time, I didn't want a lister because of the nature of the scenes we work on. So I used the VRay Proxy Tool made by David Mackenzie, and reworked it to make it Corona-compliant. I just removed the undo feature I found useless. However, for some reason the progress bar seems a bit capricious, not sure why ... no matter for now, it doesn't prevent the script from working correctly.

Let's hope you'll find it as useful as I do for daily work !

Bye.

15
Jobs / Intangibles recrute ! (Paris, FRANCE)
« on: 2018-04-24, 14:46:22 »
Intangibles est une jeune agence de design créée en 2010, basée à Paris et spécialisée en design graphique et retail design. Nos clients interviennent sur tous les secteurs d’activité, en France et à l’étranger : Sephora, Système U, Intermarché, Deezer, Fnac/Darty, Jardiland, Maisons du Monde, Picard, Prêt à Manger, Primark, Relay, …

Nous cherchons à présent à renforcer l'équipe 3d avec un(e) graphiste 3d, avec au minimum 5 ans d'expérience, pour un CDD de 6 mois à temps plein ou un CDI, selon profil. Une bonne connaissance de 3dsmax, Corona est requise, ainsi que de Photoshop (After Effects serait un gros plus). Des notions de retail design seraient appréciées.

La mission :

- Modélisation 3D des projets (retail / architecture commerciale), de 50m2 à 3500m2 :)

- Matériaux et éclairage

- Production des images et post-production sur Photoshop et/ou After Effects

- Modification et mise à jour des scènes et images 3D déjà réalisées

- Réalisation d’animations 3D
 

Le (la) candidat(e) devra :

- être rigoureux

- être autonome

- faire preuve d'initiative

- savoir s'adapter au workflow mis en place

- avoir un esprit d'équipe


Rémunération: à négocier selon profil.

Prise de poste: mai

Localisation: Paris (14e), metro Saint Jacques / RER Denfert Rochereau
 
Pour celles et ceux que cela intéresse, merci de me contacter en PM, je donnerai alors un email auquel envoyer votre candidature (CV + portfolio).
 
Merci d'avance !

Cordialement.

Pages: [1] 2 3 4