General Category > Hardware

Threadripper & Ryzen only builds (3rd Gen starts on page 50)

<< < (305/306) > >>

dfcorona:

--- Quote from: aaouviz on 2024-05-03, 12:27:49 ---
--- Quote from: Juraj on 2024-05-02, 23:03:46 --- I know a lot about children bicycles though.

--- End quote ---

Heh, I know the feeling.

Thanks again. My PC guy is updating the components list faster than I can keep up with. Please see latest, any red flags? Still a RAM mismatch?

--- End quote ---
Do not use Enermax, they've been known for issues generation after generation with their liquid AIO and bad fluid. You have two great options from Silverstone for that processor. Just make sure you go with a 360 mm rad.

emilio20:
Hi guys,

Got my 7980X machine. it's really is a beast!

Just one thing I noticed is that it is less workable during IR compare to my old machine which is Ryzen 9 5950X. when I say less workable it is difficult to tweak materials, move object and update objects while on IR.
I understand that in IR it uses the whole CPU, but it is just different experience in 5950X. Anyone experience this?

Here's my specs :

CPU: 7980X
MOBO: Gigabyte TRX50 AERO D rev.1.0
RAM: Kingston 256GB 5600MT/s
GPU: ASUS RTX 4060 OC
PSU: ASUS Aura edition 1200W 80+ Gold

Nejc Kilar:

--- Quote from: emilio20 on 2024-06-02, 07:26:54 ---Hi guys,

Got my 7980X machine. it's really is a beast!

Just one thing I noticed is that it is less workable during IR compare to my old machine which is Ryzen 9 5950X. when I say less workable it is difficult to tweak materials, move object and update objects while on IR.
I understand that in IR it uses the whole CPU, but it is just different experience in 5950X. Anyone experience this?

Here's my specs :

CPU: 7980X
MOBO: Gigabyte TRX50 AERO D rev.1.0
RAM: Kingston 256GB 5600MT/s
GPU: ASUS RTX 4060 OC
PSU: ASUS Aura edition 1200W 80+ Gold

--- End quote ---

Hmm I don't really think there should be much of a difference. Do you think you could disable SMT and give it a try? Wonder if that would help.

Also, kudos on the beastly machine!!

dfcorona:

--- Quote from: Nejc Kilar on 2024-06-03, 11:26:44 ---
--- Quote from: emilio20 on 2024-06-02, 07:26:54 ---Hi guys,

Got my 7980X machine. it's really is a beast!

Just one thing I noticed is that it is less workable during IR compare to my old machine which is Ryzen 9 5950X. when I say less workable it is difficult to tweak materials, move object and update objects while on IR.
I understand that in IR it uses the whole CPU, but it is just different experience in 5950X. Anyone experience this?

Here's my specs :

CPU: 7980X
MOBO: Gigabyte TRX50 AERO D rev.1.0
RAM: Kingston 256GB 5600MT/s
GPU: ASUS RTX 4060 OC
PSU: ASUS Aura edition 1200W 80+ Gold

--- End quote ---

Hmm I don't really think there should be much of a difference. Do you think you could disable SMT and give it a try? Wonder if that would help.

Also, kudos on the beastly machine!!

--- End quote ---
I tested Corona vs V-Ray and found V-Ray to be much faster working with materials and with IR and stuff. That's because V-Ray moved everything to Qt correct? Is Corona going to move to Qt?

TomG:
The VFB is getting rewritten for Corona 12, yes.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version